-
FOAMULAR® Pink Insulation XPS
Foamular Extruded Polystyrene (XPS) is made in several types and grades including:
FOAMULAR® 150, FOAMULAR® 250,
FOAMULAR® Insulating Sheathing, FOAMULAR® ProPink®
IS, FOAMULAR® Half-Inch, FOAMULAR® Insulpink®,
FOAMULAR® Insul-Drain® and FOAMULAR® Pink-Drain®.
This Extruded polystyrene closed-cell foam panel features continuous skin on face and back
surface. FOAMULAR insulation is produced by Owens Corning's patented Hydrovac® process
technology under conditions of strict quality control.
All Foamular XPS products are R-5 per inch of thickness except High-R CW Plus that is R-10 at 1-3/4", and R-12 at 2-1/8" thick.
-
FP-1050 Fixture Plank®
FP-1050 Fixture Plank® is a white, filled urethane Tooling Plank developed specifically to be a light-weight, tough, and cost effective alternative to aluminum for checking and assembly fixtures that experience abusive production environments. Note: Fixture and Die Plank are very similar. Use Fixture Plank if a white plank is needed or for any ceramic mold applications.
Applications: This Tooling Plank is manufactured as a dimensionally stable material for fast and accurate machining of checking and holding fixtures. Because this Tooling Plank is white, other uses includes ceramic mold applications.
Standard Sizes
- 2" x 12" x 60" , 3" x 12" x 60" , 4" x 12" x 60" , 5" x 12" x 60" , 6" x 12" x 60"
- 2" x 16" x 60" , 3" x 16" x 60" , 4" x 16" x 60"
-
Fulton™ 404 - PTFE Filled Acetal
Fulton™ 404 is a PTFE filled acetal similar to full-strength Delrin® AF. This material contains a full 20% PTFE filler. Recommended for customers who require the performance of a full-strength Delrin AF100 or AF500, but require black color instead of brown.
- Color: Black
- Special Order Only - Minimum Order & Lead-Time Apply
-
G-11/FR5 - NEMA Grade FR5
FR5 Glass-Cloth Reinforced Epoxy
NEMA grades G11 and FR5 Glass-Cloth Reinforced Epoxy - natural color is typically yellow green to amber. This grade is similar to G10/FR4 but has a higher operating temperature and superior mechanical properties at elevated temperatures. The main difference between NEMA Grades G11 and FR5 is that FR5 is a fire retardant grade of G11.
- Also sold under Norplex Grade MC511AF
-
Gillfab™ 1002 - DMS 1556
Gillfab™ 1002 is a high temperature laminate made from phenolic resin with fiberglass
cloth reinforcement.
APPLICATIONS:
The laminate is designed to be used in structural applications near heat sources,
where strength at elevated temperatures is required.
-
Gillfab™ 4030 Panel
Gillfab 4030 is a semi-structural sandwich panel composed of aluminum skins bonded to an aluminum honeycomb core.
Applications:
Used in many aircraft for interior applications including bulkheads, shelving, and galley panels. The skin thickness, alloy, honeycomb density, and panel thickness can be ordered to meet end use requirements.
Construction
- Adhesive: Epoxy adhesive to MMM-A-132 Type 1, Class 2 and 3.
- Core: 5052 aluminum foil honeycomb; density and cell size per customer requirement.
- Facings: Aluminum alloy; 2024-T3, 7075-T6, 6061-T3 or as specified.
Availability:
- Thickness: Per customer specification from .125" and up.
- Size: Up to 48" x 144" without splices in the facings.
- Facing: Standard aluminum thickness (.01", .016", .012", .025", .032" and up in .01" multiples).
- Core: Density range from 3.1 to 8.1 pcf.
- Cell Sizes: 1/8", 3/16", 1/4", or 3/8" are standard.
-
![GlasArmor™ Ballistic Resistant Panels]( "GlasArmor™ Ballistic Resistant Panels")
GlasArmor™ Ballistic Resistant Panels
GlasArmor™ Ballistic Resistant Panels are constructed to provide any facility with the latest in military grade protection from armed attackers. Originally developed for use by the Department of Defense for protection from mortar fire, our FRP Composite panels offer superior ballistic resistance at a less than 25 percent the weight of a comparable steel panel. These same panels are now available for commercial security applications for your business, home, or governmental facility.
GlasArmor panels are constructed from multiple layers of woven fiberglass, encapsulated with a proprietary resin system by the pultrusion process, which produces a rigid panel with exceptional ballistic resistance. The unique composite matrix of the panels allow for retention of the projectile to avoid potentially hazardous ricochet. These FRP panels offer ballistic resistant security with the additional performance advantages of durability, corrosion resistance, electrical non-conductivity, low thermal conductivity and light weight.
Utilized for both indoor and outdoor applications, panels can be easily incorporated into standard building design to provide undetectable ballistic protection. Panels can be field-fabricated utilizing simple installation methods and common carpentry tools. Surface finish is smooth in a white color with custom colors available in production quantities. Panels can be primed and painted or covered by gypsum board or other materials to match specific requirements.
Panels are available with a nominal thickness of 1/4", 3/8" and 1/2" for protection to UL752 levels 1, 2 & 3 and NIJ Levels I, II & IIIA test standards for ballistic resistance. Additional protection against higher power ammunitions to UL 752 Level 4 for .30 caliber rifles and Level 8 for 7.62mm rifles are achieved by layering multiple GlasArmor panels. This also permits offsetting of panel joints and easier handling for installation when the use of thicker, heavier panels for greater protection is required.
-
GPO-2
GPO-2 laminate is suited for applications where good flame resistance is required in addition to good electrical properties, physical properties, and heat resistance. Typical uses for Grade GPO-2 include: high amperage mounting panels, switch bases, terminal strips, and arc shoot components. Grade GPO-2 is a UL recognized product with a temperature index of 130 degrees celsius electrical and 160 degrees celsius mechanical. Grade GPO-2 is produced in two standard colors, red and black, and is available in thicknesses of 1/32" to 1-1/2".
-
Graphite Blocks - Semiconductor Grade
Typical Properties: DFP-1 is a 5 micron particle size material, apparent density is 1.77 g/cc, compressive strength 20,000 psi, flexural strength 12,000 psi, electrical resistivity is 600 micro ohm per inch, thermal conductivity 95 watts/m K. Oxidation threshold is 820 degrees F.
- For large orders, please contact us for a special price quotation.
-
GravoTac® - raised letter signage
GravoTac® raised letter signage - A growing favorite for indoor signage, the design of GravoTac provides the core (substrate) and cap (profile) layers separately. By outlining the desired images or text in the adhesive backed profile layer, and peeling away the excess material, GravoTac creates raised letter signage capable of complying with all ADA raised-letter regulations. The raised letter process is also a great way to create multi-colored signage with your engraving machine.
-
HDPE DesignBoard™
HDPE DesignBoard™ provides a new, trend-setting addition to our color and texture palette. Whether you are looking for rich designer shades or the toughness of HDPE with the brilliance of metal, our product has superior performance. Unlike wood or metal alternatives, our products will not rust, corrode, rot, delaminate, or splinter. With their superior scratch resistance, stiffness, and UV packages, our HDPE products are ideal for a wide range of applications, from outdoor cabinetry, to POP displays, signage and more.
- Colors: Stainless Steel, Nickel, Bronze Java, Shale
- Thicknesses:1/2" - 3/4" (12.7mm - 19mm)
- RoHS Compliant
-
High Temp Honeycomb Panels
High Temperature Honeycomb Panels are manufactured to resist tooling temperatures up to 425°F/218°C. This Honeycomb panel is fabricated with fiberglass skins and high-temperature resins. A perforated, corrosion-resistant core and 2 plies of 10-ounce fiberglass cloth provide strength and stability. This material is bonded under pressure for greater peel strength. Peel ply is applied for good bonding surface, and the panel is staged post cured to 425°F/218°C.
Applications: High Temperature Honeycomb serves as an effective back-up structure for large and small high temperature tooling applications.
-
Hydex® 4101 PBT
Hydex® 4101 offers excellent mechanical properties combined with good chemical resistance. PBT-P has good impact resistance and toughness, low coefficient of friction & wear, and does not need lubrication. It also is resistant to chemicals, chlorine, water, and steam.
Hydex® 4101L is an internally-lubricated version designed for use in higher wear resistance, PV range, and lower coefficient of friction applications.
- Standard Lengths: 4 feet, and 8 feet
-
![Hytrel® TPE Grades]( "Hytrel® TPE Grades")
Hytrel® TPE Grades
Hytrel® TPE (thermoplastic polyester elastomer) - DuPont Hytrel® thermoplastic polyester elastomer gives you the power to innovate. It facilitates the design and economical manufacture of a variety of parts and products by combining many of the best features of both high-performance elastomers and flexible plastic materials. Toughness and Resilience: Hytrel® flexes and recovers, providing excellent flex fatigue resistance, hysteresis and spring-like properties, in addition to exceptional toughness,
impact resistance, and creep resistance.
Wide Temperature Range: Flexibility at low temperatures, and good retention of mechanical properties at high temperature.
Resistance to Chemicals: Stands up to oils, fuels, hydrocarbon solvents, many other chemicals.
Hytrel® is produced in more than 20 different grades. Some of the more common grades offered by Professional Plastics are listed below.
Hytrel® 5556 TPE - DuPont Hytrel® 5556 is a medium modulus grade with nominal hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
Hytrel® 7246 TPE - High service temperature with good low temperature flexibility. Excellent oil, fuel, and solvent resistance. Low fuel permeabilityDuPontΓäó Hytrel® TPE (thermoplastic polyester elastomer) - Hytrel® thermoplastic polyester elastomer gives you the power to innovate. It facilitates the design and economical manufacture of a variety of parts and products by combining many of the best features of both high-performance elastomers and flexible plastic materials. Toughness and Resilience: Hytrel® flexes and recovers, providing excellent flex fatigue resistance, hysteresis and spring-like properties, in addition to exceptional toughness,
impact resistance, and creep resistance.
Wide Temperature Range: Flexibility at low temperatures, and good retention of mechanical properties at high temperature.
Resistance to Chemicals: Stands up to oils, fuels, hydrocarbon solvents, many other chemicals.
Hytrel® is produced in more than 20 different grades. Some of the more common grades offered by Professional Plastics are listed below.
Hytrel® 5556 TPE - DuPont Hytrel® 5556 is a medium modulus grade with nominal hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
Hytrel® 7246 TPE - High service temperature with good low temperature flexibility. Excellent oil, fuel, and solvent resistance. Low fuel permeability
-
Insite Reveal® Foam Board
Insite Reveal® Foam Board is a multipurpose foamboard that utilizes new innovative foam technology. INSITE REVEAL features a new REVEAL foam center that is specifically designed with memory to retain its thickness during processes such as mounting, laminating, screen-printing, and die-cutting. INSITE REVEAL incorporates new smooth paper liners with heavier surface coatings that promote superior ink holdout and increased print gloss while screen-printing. The coating also acts as a barrier to minimize adhesive absorption while maximizing mounting and laminating speeds. Applications include signs, displays, exhibits, photo mounting, digital imaging, framing, crafts, toys, sets, props, and presentations.
-
InSite® Flame Resistant Foam Board
InSite® Flame Resistant This foamboard is used in applications requiring additional fire safety. The board has paper liners that can be easily painted, screen printed, mounted or laminated. Insite FR, is manufactured with flame retardant additives in the foam center and in the paper facers. The polystyrene foam center is UL® classified, R4712N and the specially formulated flame resistant facers meet TAPPI T4610M-94 standards. Gilman C-III Flame Resistant - Same flame characteristics INSITE FR, but with a flame resistant UL® classified expanded polystyrene foam Bryx foamed plastic R4712(N)
-
![InteFoam® - Expanded PVC Foam Board]( "InteFoam® - Expanded PVC Foam Board")
InteFoam® - Expanded PVC Foam Board
InteFoam® is an expanded PVC foam board with a matte finish. It is lightweight, durable, chemical resistance, fire retardant capabilities and available in a variety of colors in 3mm and 6mm, gauges ranging from 1mm to 25mm (1/32Â" to 63/64Â"). InteFoam® is an excellent substrate for point-of-purchase displays and signs, and is the substrate of choice for screen-printing and digital printing. Features a consistently smooth and abrasion resistant surface for easy paint and excellent ink adhesion produces sharp, vivid colors — a printed image of superior quality! It can be thermoformed and has a variety of applications in sign, marine, and graphic arts industries. InteFoam can be heat bent, routed laminated, pressure or vacuum formed in a variety of shapes and configuration for those challenging displays shapes or promotional material. When using vinyl lettering, the bonding is excellent due to the molecular reaction (vinyl to vinyl) between the lettering and the InteFoam® surface.
Custom color matches and custom sizes available upon request, all InteFoam® has been tested and complies with UL94 V0, UL94 5V, UL48 and best all InteFoam® contains no lead or heavy metal in its formulation.
-
ISO 13485:2003 Medical
In addition to Rochling's ISO 9001:2008 certification, they are now also ISO 13485:2003 Certified.
Röchling Engineering Plastics is the only manufacturer in the U.S. to be ISO 13485:2003 certified that supplies our broad product offering of engineering plastic stock shapes to the medical market.
- Professional Plastics is a Master Distribution Partner to Rochling for their Medical Grade Plastic Shapes.
ISO 13485:2003 represents the requirements for a comprehensive management system for the design and manufacturing of medical devices including:
- Controls to ensure product safety
- Risk management activities
- Inspection and traceability
- Documentation and validation of processes
- Verification of the effectiveness of corrective and preventive actions
- ISO 13485:2016 Certificate
-
Kapton® Tape (Acrylic Adhesive)
Kapton® Tape (Acrylic Adhesive) is designed for high temperature applications, in which a solvent resistant backing is required, used on coils, capacitors and wire harnesses. This High Temperature Polyimide Tape has an acrylic adhesive with a temperature rating of 155°C (311°F)
-
Ketron® HPV - Bearing Grade PEEK
Bearing grade Ketron® HPV PEEK has excellent wear resistance in addition to the lowest coefficient of friction and the best machining characteristics of the filled PEEK stock shapes.
The addition of carbon fibers, PTFE and graphite to virgin PEEK results in a Ketron PEEK "Bearing Grade".
Its excellent tribological properties (low friction, long wear and high Pressure-Velocity capabilities) make this grade especially suited for bearing and wear applications.
- Maximum Operating Temperature: 482°F Continuous
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
