-
![Royalite® R-47 Sheet]( "Royalite® R-47 Sheet")
Royalite® R-47 Sheet
ROYALITE® R47 is a new sheet product specifically engineered for seating components. ROYALITE® R47 thermoplastic sheet is a proprietary PVC alloy that is cost competitive
with acrylic/PVC alloys while maintaining
physical performance and improving
formability. It maintains the superior
thermoforming characteristics of an ABS/PVC
alloy, while bringing a higher degree of
impact, tensile strength, and stiffness. It also
has improved heat distortion characteristics
over most acrylic/PVC sheets. Its high degree
of rigidity, especially in thin gauges, and lower
specific gravity when compared to competitive
acrylic/PVC's allows for significant cost-perpart
savings.
APPLICATIONS:
The combination of toughness, durability, and
fire retardancy* makes Royalite® R47 the
perfect choice for a wide variety of
applications. Its excellent abrasion and
chemical resistance make it suitable for many
industrial applications such as trays, tote
boxes, ducts, and sinks. High rigidity and
excellent fire rating* at thin gauges make it
ideal for electronic equipment and business
machine housings, and improved high
temperature performance over most
acrylic/PVC materials makes it the material of
choice for internal electronic components.
-
Boltaron® 6800E Sheet
Boltaron® 6800E is a proprietary, fire retardant, extruded ABS/PVC Alloy sheet designed to meet
stringent FAA flammability requirements and UL Standard 94 V-0. Boltaron 6800E offers excellent
impact strength, abrasion resistance, stain and chemical resistance, and formability.- Suggested Applications: Aircraft Interior Components
-
Boltaron® 9815E Sheet
Boltaron® 9815E is a proprietary, fire retardant, extruded thermoplastic sheet designed to meet stringent FAA requirements for flammability, smoke generation and heat release. Boltaron 9815E offers excellent impact strength, abrasion resistance, stain and chemical resistance, and thermoformability.
-
![Boltaron® 9815M Sheet]( "Boltaron® 9815M Sheet")
Boltaron® 9815M Sheet
Boltaron® 9815M - FAR-Rated High Impact Resistant Metallic-Finish Sheets
Advanced technology permanently integrates a durable metallic cap layer and a color-matched substrate for a deeper, richer appearance than metallic-colored monolithic sheet. Higher impact strength improves service life. FAR-rated Boltaron® 9815M sheet offers an exceptional combination of design freedom, aesthetics, thermoforming consistency and long service life for aircraft interiors. This proprietary thermoplastic alloy sheet meets FAR 25.853(a) and FAR 25.853(d) for smoke density and heat release. With Izod impact strength of 5.0 ft-lb/in. (265 J/m), it easily outperforms competitive 65/65 compliant products rated at 3.0 ft-lb/in. (159 J/m).
Unlike monolithic metallic sheet in which opaque color pigments obscure a high percentage of metallic pigments, Boltaron metallic sheet permanently fuses an opaque color substrate with a matching clear grade containing only metallic pigments. The result: a unique and dramatically superior level of depth and reflectivity.
Because the cap film is a "metallized" version of its 9815 substrate color, designers have access to metallic finishes in Boltaron sheet's exceptionally wide range of colors. The Boltaron impact resistant FAR 25.853(d) rated product family includes 9815E extruded sheet, 9815M in metallic finishes, 9815D with unlimited decorative patterns, 9815P in the widest range of textures, and 9815F film and thin-gauge sheet for two- and three-dimensional laminating, and Boltaron® 9850 with a 50/50 rate of heat release.
Applications: - Instrument panel housings - Class dividers - Bulkhead laminates - Galley and lavatory components - Bull noses, gap covers, moldings - Sidewall and kick panels - Window reveals - Seat parts, backs, arm rests - Tray tables - Passenger Service Units (PSUs) - Light housings - Video monitor shrouds - Life vest shrouds - Air ducts
-
Komabrite DP™ Sheet
Komabrite DP™ Sheet is a foam PVC sheet designed for digital flat bed printing. Komabrite DP is a versatile closed-cell PVC sheet ideal for digital flat bed printing. It gives printers the confidence to print on PVC at higher production speeds. If you run a digital flat bed press or are thinking about expanding your business by adding a digital flat bed press, Komabrite DP is the solution to your printing requirements. Komabrite DP is crucial to the success of your investment in advanced printing technology.
- Komabrite DP is perfect for: Point-of-purchase Displays, Signage, & Store Fixtures.
-
Polyurethane Sheet & Rods
Polyurethane sheets, rods and tubes are made of tough, crack-resistant, and abrasion-resistant polyurethane, which lasts significantly longer than conventional rubbers and plastics. We provide polyurethane in custom diameters, lengths, hardness, and colors with little or no tooling costs.
- Natural Color is Translucent Amber
-
Spectar™ PETG Sheet
Eastman Spectar™ Copolyester PETG Sheet is more durable than impact-modified acrylic, provides excellent chemical resistance, and easy, repeatable thermoforming capability. Spectar™ PETG has good flamability rating, and is approved for food contact. It's production flexibility inspires innovative design.
For more information, contact Professional Plastics today.
-
-
![Perspex® Acrylic Sheet]( "Perspex® Acrylic Sheet")
Perspex® Acrylic Sheet
Perspex® Acrylic Sheet
Perspex is everywhere! It is the medium through which some of the world's most prestigious brands choose to reflect their corporate identity using signage and point of purchase. Household names such as Shell, McDonalds, Audi, American Express, Nissan, BP, Walmart and Mercedes choose Perspex because they can rely on its inherent performance characteristics and exact color matching ability to portray their identity around the globe with consistent flair and durability.
Perspex is fast gaining a winning position in the design, interiors and lifestyle markets. The most influential designers and image-makers of our era are specifying and working with Perspex. It is the material for contemporary icon pieces such as Philippe Starck's Louis Ghost chair — which comes in a range of colors from pastel yellow to sky blue. One of the winners at the 2003 Turner Prize in London was a multi-colored Perspex ceiling. Few issues of Elle Decoration or World of Interiors magazines go by without featuring Perspex furniture and accessories.
Perspex is used for its consistent quality from order to order, for its color palette, for its inspiring surface effects, for its durability in demanding environments and for the creative potential it affords beyond competing acrylics and traditional materials such as wood, steel, glass or ceramics.
-
Royalite® R84/R21Sheet
ROYALITE® R84/21 thermoplastic sheet is a unique composite of ROYALITE® R84 low gloss weatherable cap sheet over ROYALITE® R21 high impact ABS substrate. It is ideal for rugged outdoor applications requiring high impact strength and stiffness. R84/21 is available in a variety of standard colors, and custom color matches also are available.
-
G-10/FR-4 Copper Clad Sheet
Copper Clad FR-4 - PCB Laminate Sheet
This flame retardant copper-clad laminate is made of continuous woven glass cloth impregnated with epoxy resin. The substrate is made of FR4 which is a flame retardant version of G-10 material. Copper Clad FR-4 Sheet is used to created printed circuit boards.
- .059" is most common thickness.
-
Royalite® R-85/21 Sheet
Royalite® R85/21 thermoplastic sheet is a unique composite of Royalite® R85 low gloss weatherable cap sheet over Royalite® R21 high impact ABS substrate. It is ideal for rugged outdoor applications requiring high impact strength and stiffness. R85/21 is available in a variety of standard colors, and custom color matches also are available.
TARGET MARKETS & APPLICATIONS
Royalite® R85/21 sheet is currently used for applications in the marine, RV, automotive, agricultural equipment and recreational industries. It can be fabricated into consoles, interior and exterior trim parts, shrouds and many other parts. To assure proper weatherable coverage after forming, R84 cap can be ordered in a variety of thicknesses.
COLORS AND TEXTURES
Royalite® 85/21 is offered in a tremendous range of standard and custom low-gloss colors with a multitude of textures ranging from smooth to deep textured.
-
![CPVC-300 - ESd FM 4910 Sheet]( "CPVC-300 - ESd FM 4910 Sheet")
CPVC-300 - ESd FM 4910 Sheet
CPVC-300™ - ESd FM 4910 Sheet (General Purpose Grade)
Static Dissipative Plastic - CPVC Sheet
CPVC-300™ FM 4910 is a plastic sheet product that controls static electricity in clean room applications requiring flame retardant clear plastic. These applications include: clean room glazing; machine windows, doors, covers and enclosures; and fabricated desiccators and cabinets. The product is a Factory Mutual 4910* compliant chlorinated polyvinyl chloride sheet coated with SciCron Technologies clear, C-300™ static dissipative coating to prevent charge generation on the sheet surfaces. This controls particulate attraction and prevents electrostatic discharge (ESD) events completely independent of humidity. CPVC-300 - FM 4910 has excellent flammability and smoke generation properties, plus superior chemical resistance, surface hardness, and mar resistance.
*The CPVC substrate used to make this product has been tested according to procedures outlined in the Factory Mutual Clean Room Materials Flammability Test Protocol (Class 4910) and is listed as an approved material in the Factory Mutual Research Approval Guide. It has been formulated to resist fire and to emit low levels of smoke when tested according to this protocol. The C-300 coated product, CPVC-300 - FM-4910, has not been similarily tested by Factory Mutual Research, however, it is very unlikely that the presence of the C-300 coating on the sheet sufaces has any influence on the flammability characteristics of the sheet when tested according to the 4910 protocol. The C-300 coating, which is only one micron thick, is formulated with an incombustible conductive metal oxide which makes up 66% of the coating weight. The remainder of the coating adds less than 0.3 gram of combustible binder per square foot of coated sheet surface. The addition of such a small fractional percentage of combustible material is extremely difficult to detect.
-
Kydex® V - Utility Sheet
Kydex® V sheet is a recycled grade of a proprietary thermoplastic sheet that is cost competitive with other grades of thermoplastic sheet while offering improved performance.
Kydex® V is particularly well suited for hidden or painted parts since it has some degress of colour variability. It is only available in Black (52114), in thicknesses from 1.00mm (0.040") and up, and in a limited number of textures.
- Note: 1 Skid Minimum = 1000 Pound Minimum Order (.125" thick = 43 sheets)
KYDEX® V100 AND KYDEX V102 have been DISCONTINUED. Replace with Kydex V103
-
![MC511A (NEMA G-11) Sheet]( "MC511A (NEMA G-11) Sheet")
MC511A (NEMA G-11) Sheet
Norplex MC511A (NEMA G-11) is a high performance epoxy glass composite that provides higher strength than MC511AF. The product offers excellent physical, mechanical, and electrical properties at both room temperature and elevated temperatures. MC511A is chosen over high-temperature mat glass thermoset composites and high performance glass-filled thermoplastics because of its excellent machinability, outstanding dimensional stability, superior creep resistance, and other high-temperature and performance characteristics. In use, the product is often exposed to continuous temperatures as high as 155°C for up to a decade. And in short-term applications such as insulation in aerospace and defense systems, the material withstands temperatures in excess of 300°C. Halogen free to conform to European restrictions, MC511A is specially formulated to meet exacting power generation standards requiring higher strength at elevated temperatures. The product is considered the premier material for use as Class F insulation in electrical power generation and transmission equipment.
-
PVC Sheet - Perforated Sheet
PVC Perforated Sheet (Perforated PVC Sheet)PVC is a Polyvinylchloride thermoplastic material with excellent chemical resistance and dielectric properties, good tensile, flexural and mechanical strength, low moisture absorption, exceptional dimensional stability and good flammability characteristics. PVC Perforated Sheet is ideal for strainers & drains, and may be used in acid resistant applications.
Professional Plastics offers 23 standard plastic perforated sheets including both dark gray PVC and natural color polypropylene. Stock sheets range from 1/16" to 1/4" thick, and come in configurations ranging from 10% open air to 48% open air.
Perforated PVC Sheets are ideally suited to many of the same applications as perforated metal; however, it is lighter and is more corrosive resistant.
-
Rubber Sheeting - Calendered
Calendered rubber sheeting is available in roll stock in these materials:
- NEOPRENE BLACK -
36 " WIDE 50, 60, 70 DUROMETER A
- BUNA N BLACK -
36" WIDE - 50, 60, 70 DUROMETER A
- WHITE BUNA N - 36" WIDE - 60 DUROMETER A
- NEOPRENE WITH POLYESTER CLOTH INSERTED SHEET -
48 " WIDE - 70 DUROMETER A
- SBR WITH POLYESTER CLOTH INSERTED SHEET -
48 " WIDE - 70 DUROMETER A
- PURE GUM -
36" WIDE
- 70 SHORE FLOUROELASTOMER -
36" WIDE
- BLACK CORRUGATED MATTING
- EPDM -
36" WIDE - 50, 60 DUROMETER A
- RED RUBBER PACKING - 36 " WIDE
-
Acrylite® Corrugated Sheet
ACRYLITE® Corrugated acrylic sheet, made from impact-modified sheet, diffuses light in an optimum manner and reflects the heat of the sun. It is perfect for conservatories, patios, domestic greenhouses, carports, windscreens and balcony parapets. Guaranteed weather resistant, the iridescent coating gives a highly attractive, reddish-purple surface sheen.
-
Boltaron® 4125 CPVC Sheet
Boltaron 4125 is a normal impact, high temperature, corrosion resistant CPVC sheet with an industrial smooth finish on both sides. Boltaron 4125 conforms to ASTM-1784.
- Boltaron 4125 CPVC Sheet is Greyish-Purple in color
-
![Noxtat SD Polycarbonate Sheet]( "Noxtat SD Polycarbonate Sheet")
Noxtat SD Polycarbonate Sheet
Noxtat SD polycarbonate sheets are coated with a transparent metal/plastic material that will permanently prevent formation of static electricity on the surface.
Available in Two Types:
- Noxtat SDG - Non Bendable Polycarbonate with Static Dissipative Coating- Excellent Abrasion Resistance.
- Noxtat SDB Static Dissipative Coating- Bendable To A Soft Radii - Abrasion Resistant.
The surface has excellent mar and abrasion resistance. Resistance to charge generation, and superior static decay characteristics and cannot be tribocharged. The product displays excellent control of both electrostatic discharge (ESD) and particulate attraction. Permanent characteristics are not affected by humidity
Applications:
NOXTAT SD polycarbonate plastic is a sound choice for manufacturing applications where effects of ESD could cause rejects or hidden latent damage to sensitive electronic devices. This product is widely used in the semi-conductor, electronic and micro-manufacturing industries. Noxtat is also used in other industrial applications such as screen assembly, packaging, explosive environments where static discharge must be prevented and applications where sensitive process instrumentation and equipment must be protected from static charge.
Typical Parts Made from Noxtat SD: - ESd Covers, Guards, Access Panels, Machine Windows and Doors, Static Control Shields, Glove Boxes, Electronic Equipment, Process Instrumentation, Conveyor Line Covers, Clean Room Windows and Doors, Partitions, and Pass-Through Modules.
The polycarbonate sheet may be fabricated into a wide variety of shapes using the equipment used for uncoated sheet products. The product is not suitable, however, for most heat-formed configurations because the hard cross-linked polymer surface is not designed for heat bending. NOXTAT SDB™ has been designed for heat bending. When gluing it is necessary to mechanically remove the coating surface to insure a good bond. More information about fabrication is provided in a Technical Information Bulletin.
Product Availability:
NOXTAT SD Polycarbonate is available in clear, transparent gray, and transparent bronze colors. Tints for UV filtering and other light filtering are available by special order for applications where some wavelengths may interfere with processing operations.
Hardness
Polycarbonate coated with static dissipative NOXTAT SDG will perform on the pencil hardness scale at 2B, clearly the hardest coating available today.
Solvent Resistance
Solvent resistance of the test surfaces was determined using ASTM D 1308 (3.3.3 Spot Test, Covered). The solvent was placed on the substrate surface and immediately covered with a watch glass. Solvents were repeatedly applied to keep them in contact with the surface. Tests were conducted at 77° F (25° C). The surface was examined at intervals of 1,4,8 and 16 hours for signs of attack such as blistering, peeling, or discoloration. The test was terminated at 16 hours. The table indicates the time at which the visual attack of the surface becomes evident.
Noxtat Stain Resistance
Stain resistance of the test surfaces was determined using ASTM D 1308 (3.3.3 Spot Test, Covered). The stain was applied to the substrate surface (a saturated one inch piece of tissue paper was used for the liquid stains) and immediately covered with a watch glass. The test was conducted at 122° F (50° C). The stain was allowed to remain in contact with the surface for 16 hours. At the end of this period excess stain was removed with dry tissue. The degree of staining was observed and recorded based on a scale of 0 to 5 where 0 represents no staining and 5 represents severe staining.
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
