plastic supplier, plastic sheet, plastic rods, plastic tubing, plexiglass, store Professional Plastics sells Plastic Sheet, Plastic Rod, Plastic Tubing and Plastic Film and materials for any industry
Professional Plastics Locations
Account Account Shopping Cart Shopping Cart
About Us       Careers       Locations      Contact Us

HomeMaterials By SICOzone Generators (3559-OG)

Ozone Generators (3559-OG)

 
More Channel SICs More Channel SICs
Ozone Generators (3559-OG)
Ozone generators are used to produce ozone for cleaning air or remove smoke odors in unoccupied rooms. These ozone generators can produce over 3 g of ozone per hour. Ozone often forms in nature under conditions where O2 will not react. Temperature and humidity play a large role in how much ozone is being produced using traditional generation methods such as corona discharge and ultraviolet light. Old generation methods will produce less than 50% its nominal capacity if operated with humid ambient air than when it operates in very dry air. New generators using electrolytic methods can achieve higher purity and dissolution through using water molecules as the source of ozone production. Because of the high reactivity of ozone, only a few materials may be used like stainless steel (quality 316L), titanium, aluminium (as long as no moisture is present), glass, polytetrafluorethylene (PTFE - aka Teflon®), or polyvinylidene fluoride (PVDF aka Kynar®) . Viton® may be used with the restriction of constant mechanical forces and absence of humidity (humidity limitations apply depending on the formulation). Embrittlement or shrinkage is the common mode of failure of elastomers with exposure to ozone. Ozone cracking is the common mode of failure of elastomer seals like O-rings. Silicone rubbers are usually adequate for use as gaskets in ozone concentrations below 1 wt%, such as in equipment for accelerated aging of rubber samples.

(LAM FRP-3) LAM FRP-3 - FM4910 FRPP
LAM FRP-3 - FM4910 FRPP
 
(PVDF EXT SHT-ROD) PVDF - Extruded Rods & Plates
PVDF - Extruded Rods & Plates
 
(VITON SHEET) Viton® fluoroelastomer Sheet
Viton® fluoroelastomer Sheet
 
(Polycarbonate GP Sheet) Polycarbonate Sheet - GP Glazing Grade
Polycarbonate Sheet - GP Glazing Grade
 
(SILICONE RUBBER SHEETING (Solid-Colors)) Silicone Rubber Sheeting (Solid-Colors)
Silicone Rubber Sheeting (Solid-Colors)
 
(PVDF1000) Symalit® PVDF 1000 - FM4910
Symalit® PVDF 1000 - FM4910
 
(PVDFPIPE) PVDF/ Kynar Pipe
PVDF/ Kynar Pipe
 
(TEFLON TUBING AWG) PTFE Tubing - Extruded AWG Sizes
PTFE Tubing - Extruded AWG Sizes
 
(TEFLON SHEET/ROD-VG) PTFE Sheets & Rods (Virgin Grade)
PTFE Sheets & Rods (Virgin Grade)
 
(VITON TUBING) Viton® Tubing
Viton® Tubing
 
(UHMW-REPRO) UHMW Sheet & Rod (Reprocessed)
UHMW Sheet & Rod (Reprocessed)
 
(POLYPRO SHEET-WHITE) Polypropylene Sheets & Rods - White
Polypropylene Sheets & Rods - White
 
(DELRIN AF BLEND-13%) Delrin® AF Blend - 13% PTFE (Standard)
Delrin® AF Blend - 13% PTFE (Standard)
 
(UHMW Angle) UHMW Angle
UHMW Angle
 
(VITON O-RINGS) Viton® O-Rings
Viton® O-Rings
 
(NYLON 6/6 ROD/SHEET/TUBE) Nylon 6/6 EXTRUDED, UNFILLED
Nylon 6/6 EXTRUDED, UNFILLED
 
(ACETAL COPOLYMER) Acetal Sheets & Rods (Copolymer)
Acetal Sheets & Rods (Copolymer)
 
(PLEXIGLASS SHEET ACRYLIC SHEET-CAST) Plexiglass Sheet - ACRYLIC SHEET - CAST
Plexiglass Sheet - ACRYLIC SHEET - CAST
 
(NYLON 6 CAST ROD/SHEET/TUBE) Nylon 6 - CAST, UNFILLED
Nylon 6 - CAST, UNFILLED
 
 

  Privacy Policy | Terms and Conditions | Site Map | Contact Us | About Us | Our History

Need More Help? Call us 1-888-995-7767

©Copyright 2017, Professional Plastics All Rights Reserved