-
NP-691 - NEMA FR-1 Punching Grade
NP691 (NEMA FR-1) is a flame-resistant, room temperature punching grade is similar to NP612 in electrical
properties and mechanical strength, but offers improved moisture resistance. NP691 is UL listed (File Number
E-187147). NP691 complies with the requirements of MIL-I-24768/24, Type PBM-PF.
-
NP310 (NEMA C) Canvas Phenolic
NP310 (NEMA C) consists of a cotton canvas fabric and general-purpose phenolic resin. The product is easy to machine and operates with less noise than metal. In addition, this material is not as abrasive as fiberglass alternatives when used in wear applications. Since it does not spark when struck, NP310 can be used in explosion-proof environments. The material is commonly used to make gears, pulleys, rollers, and guides. NP310 is a mechanical grade and does not have electrical properties comparable to NP310E. NP310 complies with the requirements of MIL-I-24768/18, Type GPG, and IEC 60893 PF CC 201.
-
NP310E (NEMA CE) Canvas CE Phenolic
NP310E (NEMA CE) Phenolic consists of a cotton canvas type fabric and electrically insulating phenolic resin system. NP310E is easy to machine and operates with less noise than metal. In addition, this material is not as abrasive as fiberglass alternatives when used in wear applications. Since it does not spark when struck, NP310E can be used in explosion-proof environments. The material is commonly used to make gears, pulleys, rollers, and guides, as well as electrically insulated parts such as control boards. NP310E complies with the requirements of MIL-I-24768/14, Type FBG, and IEC 60893PF CC 203.
-
NP313 MD-Phenolic
NP313 from Norplex is composed of cotton fabric combined with a phenolic resin system that has been enhanced with a molybdenum disulfide powder to reduce wear. NP313 is easy to machine and operates with less noise than metal. In addition, this material is not as abrasive as fiberglass alternatives when used in wear applications. Applications include a variety of parts subject to wear and yet, NP313 maintains most of its electrical insulation properties. NP313 has better wear properties than NP310 and is used where additional lubrication is very low or non-existent.
-
NP315 Graphite-Filled Canvas Phenolic
Norplex NP315 Graphite-Filled Canvas Phenolic. NP315 consists of cotton canvas fabric combined with a phenolic resin enhanced with a solid graphite lubricant to reduce wear. The product is easy to machine and operates with less noise than metal. In addition, this physical material is not as abrasive as fiberglass alternatives when used in wear applications. Applications include a variety of parts subject to wear. This material can conduct electricity and it should not be used where this could cause a safety hazard
-
NP320E (NEMA LE) Linen Phenolic
NP320E (NEMA LE) is used where better machining is needed compared to that offered by canvas grades This product consists of a fine-weave linen fabric and electrical grade of phenolic resin. Besides easy machining, NP320E operates with less noise than metal. In addition, this physical material is not as abrasive as fiberglass alternatives when used in wear applications. Since it does not spark when struck, NP320E can be used in explosion-proof environments. Suitable for smaller and more intricate shapes than those made with NP310, this product is commonly used to make gears, pulleys, rollers, and guides, as well as electrical insulating parts.
-
NP511 (NEMA G-11)
NP511 (NEMA G-11) combines a woven glass fabric and a high temperature epoxy resin system (Tg over 180°C) that is non-brominated. The product provides consistent quality and good electrical properties under dry and humid conditions, as well as high flexural, impact, and bond strength at room and elevated temperatures. This product is suitable for a variety of structural, high humidity, and electrical insulation applications, which include cryogenic applications and many other applications for which very high or very low temperatures are part of the environmental requirement of the application. NP511 meets or exceeds the requirements of MIL-I-24768/3, Type GEB.
-
NP600 Paper Phenolic Entry Board
NP600 is paper phenolic product designed for use as drill entry material for the manufacture of printed circuit boards. A non-NEMA economy grade, the product is used in jigs and templates. It has a hard, flat surface for good drill starts, as well as sufficient strength to maintain hole positions
-
NP843 ESd Paper Phenolic
NP843 ESd Paper Phenolic from Norplex Micarta is made from a static-dissipative phenolic resin and
kraft paper substrates. Its insulating core makes it ideal for X-ray applications that require maximum X-ray clarity, such as X-ray tables in operating rooms.
-
Nycast® 12 - Low Moisture Nylon
NYCAST® 12 is specially formulated and designed
to offer:
- Very low moisture absorption
- Superior wear resistance
- Dimensional stability
- Exceptional lubrication ability
- Outstanding mechanical characteristics
- High impact strength
- Lower thermal expansion
-
-
Nycast™ 6PA FG - Food Grade Cast Nylon - Colors
Nycast™ 6PA FG - Food Grade Cast Nylon in Colors - FDA compliant grades. Nycast™ 6PA FG can be in direct contact with foods. The material offers high wear resistance and is an ideal substitute for stainless steel wherever lubrication is not a concern.
-
NylaPro 1000-XL
NylaPro 1000-XL contains a proprietary solid lubricant, which offers a lower Dynamic Coefficient of Friction, and Superior Wear Resistance to all other grades of Type 6 Monomer Cast Nylon. NylaPro 1000-XL is used for Dynamic applications where external lubrication is difficult or impossible. Providing in excess of 5 times longer part life than other lubricated materials, NylaPro 1000-XL offers significant savings in machine maintenance and down time costs. As well, it provides added assurance of part life in friction applications where other Cast Nylons may fail.
Typical Applications:
Wear Strips - Bearings / Bushings - Abrasion Pads - Rollers - Guide Rails - Star Wheels (Bottling Plants) - Valve Seats
- Color: Light Grey
-
Nylapro® PVM - High PV
Nylapro® PVM (pressure/velocity/maximum) was developed to provide a premium material for a variety of applications. Nylapro PVM is a self lubricated material with a low coefficient of friction that can increase the life of equipment. Nylapro® PVM offers exceptional PV (pressure times velocity) values resulting in an excellent material for tough load bearing/frictional applications.
Typical Applications: - Bearings & Bushings
- Provides Superior PV Performance when compared to standard Nylon, Nylon MD or Oil-Filled Nylon
-
Nylatech IRG™ Impact-Resistant Nylon
Nylatech® IRG retains the basic physical properties of nylon 6 but has increased impact resistance. Since traditional cast nylon 6 materials are semi-crystalline, they are susceptible to cracking and breaking when subjected to high impact loads especially when the part is nicked or notched. Nylatech IRG addresses this issue. Due to the impact resistance of Nylatech IRG, it outperforms these traditional grades in heavy impact applications such as pile driving cushions. The material can also be used in vibration dampening applications, mechanical stops or other high impact situations.
- Nylon IRG Blue (Nylatech IRG)- Impact-Resistant Grade contains glass-filler for enhanced stability.
- This grade is BLUE in Color
-
Nylatron® 66 SA FR
Nylatron® 66 SA FR - This grade has been developed to fulfill the requirements as set out in the test program conducted on plastic material to measure flammability characteristics. It determines the material's tendency either to extinguish or to spread the flame once the specimen has been ignited. This program is described in UL 94 and this product grade fulfills the V-0 criteria as from 1 mm thickness. It also fulfills the requirements as set out in EN 45545-2 regulation - a standard specific for railway applications - fire protection on railway vehicles.
Typical Applications: Cable holders - Cable clamps - Cable channels - Connectors
-
![Nylatron® VMX Food Grade PA6]( "Nylatron® VMX Food Grade PA6")
Nylatron® VMX Food Grade PA6
Nylatron® VMX Polyamide PA6 FG (Food Grade) is a EU 10/2011 and FDA 21 CFR & 177.1500 compliant material containing a metal detectable additive, has been specifically tailored for use in the food processing and packaging industries where it can easily be traced by different detection systems installed to detect
contamination of the foodstuffs. Nylatron® VMX PA6 FG presents good mechanical strength, stiffness, impact strength and wear resistance and therefore make this
grade especially suited for wear and friction applications in the food Industry.
Applications: Thrust washers, Seals, Rollers, Pulleys
Engineered plastics with visual, metal, and x-ray detectability - Increase safety and efficiency with the VMX (Visual, Metal, X-Ray) portfolio. Our new VMX polymers enhance your food processing capabilities by bringing three-way detectability and dual food compliance (EU and FDA). The range includes four unique polymers - each tailored to meet different performance requirements.
- Better performance through a safety-first approach
Food safety is the highest priority for processors and Original Equipment Manufacturers (OEM). Your reputation is banked on it. Plastic contamination in a food product could mean food recalls, legal penalties, brand damage and even bankruptcy.
That's why food safety is always at the top of our agenda when we develop engineering plastics for food contact applications. But we also know that OEMs and processors face further challenges. Food processing speeds continue to increase. This in turn causes increased stresses on equipment, leading to potential failure of components which can risk food contamination in the long run. In order to improve food processing safety, the need for components made from high-performing, detectable polymers has never been greater.
-
Nylatron® WP
Nylatron® - Developed specifically for wear pads, Nylatron® WP outperforms its competition across a wide range of applications and in multiple industries. Nylatron WP offers an economical solution to provide superior performance, weight and noise reduction, corrosion resistance, and easy machining. This self-lubricating Nylon reduces maintenance and the associated downtime and cost. Nylatron® WP truly outlasts them all.
-
Nylube™
Nylube™ has substantially improved wear resistance abilities compared to any other grade of cast nylon, whilst retaining excellent physical property characteristics.
Nylube contains a combined liquid/solid lubricant system which allows for a coefficient of friction as low as 0.08. This is below that of almost any other polymer available at present.
Nylube has substantially improved the wear resistance abilities compared to that of any other currently available lubricated grade of cast nylon, whilst retaining excellent
physical property characteristics. The material is particularly suited to dry running bearing applications throughout a wide load, speed and temperature range (up to 120°C).
Nylube is suitable for use in applications in the food and pharmaceutical industries.
-
Paper Phenolic - Grade XP Punching Grade NP611
Paper Phenolic - Grade XP Punching Grade
NP611 (NEMA XP) is a hot-punching, paper based phenolic grade. With mechanical properties approaching those of NP610, NP611 also offers improved electrical and punching characteristics. NP611 is a warm to hot punching grade, used for switch parts and other applications that need good moisture resistance, such as switch bases, terminal boards, insulating washers, and other intricate punched parts.
- NP611 complies with the requirements of MIL-I-24768/19, Type PBM-P.
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
