-
Nylon MD Sheets & Rods - Extruded 6/6
Nylon® MD (extruded type 6/6) is a nylon and molybdenum disulfide (MoS2) composition designed to improve the mechanical, thermal and bearing properties to type 6/6 nylon while maintaining its basic electrical and chemical characteristics.
Through compounding, finely divided particles impart extra lubricity to this nylon, permitting Nylon MD parts to operate with little or no lubrication. This makes it especially suited to applications where external lubrication is impractical, contaminating or difficult to maintain. The added lubricity also contributes dramatically to component service life, making Nylon MD a very cost-efficient choice.
Nylon MD provides non-galling and non-scratching characteristics, sound dampening qualities, insulating properties, resistance to oils, greases, most alkalies, solvents, and organic acids
- For very large and complex shapes, consider Cast Nylon MD (type 6).
-
Polypropylene Sheets & Rods - White
Polypropylene Sheets & Rods are available in opaque white color is used for a wide variety of applications from basic industrial tanks to Semiconductor Equipment & Medical Equipment where appearance is vital.
Sheet Sizes: 48" x 96" and 48" x 120" sheets with gauge sizes ranging from 1/8" to 1"; 60" x 120" sheets with five gauge sizes ranging from .125" to 1"
Other Colors:
- Black, stress relieved, one side film masked — 48" x 96" sheets with gauge sizes ranging from 1/8" to 1"
- Blue, stress relieved, one side film masked — 48" x 96" sheets with three gauge sizes ranging from 1/8" to 1/2"
Industries & Applications:
Chemical handling and storage,
Laboratory equipment,
Semiconductor Chemical storage tanks, Chip & wafer processing equipment,
Lab equipment cabinetry,
Wet process workstations
- Film masked 1 Side is Standard (2 sides available in white only-special request only)
-
Texas - Plastic Sheets, Rods, Tubing
Texas Plastic Materials - Texas (Plastic Sheets, Rods, Tubing & Films)
Professional Plastics offers a full range of Plastic Sheets, Plastic Rods, Plastic Tubing and Plastic Films through our Texas locations. Two location to serve you: Carrollton (Dallas - Ft Worth) & Houston. Call us today or order online from our website. Materials include Delrin, Nylon, Teflon, PTFE, Plexiglass, Lexan, Polycarbonate, UHMW, PVC, Polypropylene, HDPE, Vespel, Rulon, Meldin, Torlon, Techtron, PEEK, Ryton, Radel & more.
Professional Plastics, Inc. (Dallas Area)
2060 Luna Road, Suite 120
Carrollton, TX 75006
Toll Free: 800-654-7069
Local: 214-575-5400
Fax: 214-575-5410
sales@proplas.com
Professional Plastics, Inc. (Houston Area)
13823 N. Promenade Blvd
Bldg 3, Suite 100
Stafford, TX 77477
Toll Free: 877-216-7767
Fax: 844-776-7527
sales@proplas.com
-
Plastic Sheets, Rods, Tubing - Illinois
Professional Plastics supplies Plastic Sheets, Rods, Tubing and films to customers in Illinois within 1-2 business days from our Cleveland, Ohio distribution hub. Stock materials include; Delrin, Acetal, Nylon, Teflon, PTFE, PVC, Polypropylene, Kynar PVDF, UHMW, HDPE, LDPE, Vespel, Meldin, Torlon, Semitron, PEEK, PPS, Turcite and more.
Call Us Toll-Free at (888) 995-7767 or e-mail to sales@proplas.com
Cleveland, OH Warehouse
800 Resource Drive, Suite 12
Brooklyn Heights, OH 44131
Toll-Free Phone: 888-995-7767
Toll-Free Fax: 888-960-0001
Sales Manager: John Boris
Hours: Monday thru Friday 8:00 am to 5:00 pm
Warehouse Size: 9,000 square feet
Commonly Stocked Materials: Delrin, Nylon, Acrylic, Plexiglass, Polycarbonate, PVC, PP, HDPE, UHMW, Teflon.
-
Plastic Sheets, Rods, Tubing - California
California Plastics Supplier - Plastic Sheets, Plastic Rods, Plastic Tubing - California
Professional Plastics offers a full range of Plastic Sheets, Plastic Rods, Plastic Tubing and Plastic Films through our California Locations. Multiple California locations to serve you: Fullerton (Orange County & Los Angeles), San Jose (san Francisco Bay Area), Sacramento & San Diego. Call us today or order online from our website. Materials include Delrin, Nylon, Teflon, Plexiglass, Lexan, Polycarbonate, UHMW, PVC, Polypropylene, HDPE, Vespel, Rulon, Meldin, Torlon, Techtron, PEEK, Ryton, Radel & more.
-
Plastic Sheets-Rods-Tubing -Atlanta Georgia
Plastic Sheets, Rods and Tubing Supplier - Atlanta, Georgia Metro Area
Professional Plastics offers plastic sheets, plastic rods, plastics tubing to meet your most demanding needs. Our experienced sales team provides prompt delivery and friendly customer service to customers throughout the state of Georgia and surrounding areas.
Commonly Stocked Materials: Delrin, Nylon, Acrylic, Plexiglass, Polycarbonate, PVC, PP, HDPE, UHMW, Teflon PTFE, Turcite, Tygon, Vespel, Meldin, Torlon, PEEK, Ultem, Kynar PVDF, G-10/FR4, CE, LE, Paper Phenolic & more.
Professional Plastics of Atlanta, Georgia offers a massive inventory of engineering plastics including premium product lines such as; MCAM-Quadrant, Norplex, Cyro, Plaskolite/Covestro, Vycom, Kydex, Boltaron, Simona, Saint Gobain, Rochling and more.
We are committed to providing our customers with a competitive advantage in the marketplace to create a win-win relationship.
-
Plastic Distributor - Sheets, Rods, Tubing, Film
Plastic Distributor for Plastic Sheets, Plastic Rods, Plastics Tubing & Plastics Films.
Professional Plastics is a plastics distributor specializing in the distribution of Plastic Sheets, Plastic Rods, Plastics Tubing & Plastics Films. While some plastics distributors only offer a handful of products, or only commodity plastics, Professional Plastics is a full-line plastics distributor offerring the widest range of materials in the industry. Products include thermoplastics, thermosets, composites, ceramics, metals, and plastic fabricating tools.
-
Plastic Sheets, Plastic Rods, Plastic Tubing, Plastic Film
Plastic sheets, rods, tubing and film are available from Professional Plastics website.
Professsional Plastics stocks the world's largest inventory of high- performance engineering plastics shapes. Order online & save from our easy to use website.
Just select the material from our drop-down list or QuickSearch Box & find the material you need.
-
-
GlasRod® Fiberglass HIR Rod & Shapes
GlasRod® Fiberglass Solid Rod and Bar products are widely used in electrical, industrial, and construction applications. Shapes include Round Bar, Square Bar, Rectuangular Bar, A Shape & Dog Bone.
GlasRod® products are available in 3 basic grades:
- MTS (Red Color) - most economical for electrical applications. 155° C performance, 50,000 psi tensile strength, 80,000 psi flexural strength.
- Available in Retangle, Square A & Dog Bone Shapes
- SG200 (Tan color) - highest temp (210° C), excellent thermal endurance.
- Available in Retangle, Square A & Dog Bone Shapes
- HIR(Mint Green Color) - highest physical properties. Excellent electrical properties. 200° C Thermal Performance. Dimensional Stability and 100,000 psi Flexular Strength.
-
![Acetal Rod - Colors FDA (Food Grade)]( "Acetal Rod - Colors FDA (Food Grade)")
Acetal Rod - Colors FDA (Food Grade)
Acetal Rod - Colors FDA (Food Grade) - FDA-Compliant Colored Acetal Rods from Professional Plastics are available in seven standard FDA-compliant colors. These colored acetal Rods meet the requirements of FDA Regulation 21 CFR, Section 177.2470 (e)(1),(2). Colored acetal is ideal for change-out parts that need to be quickly and easily identified for use on specific processes. Available in Red, Blue, Green, Yellow, Orange, Gray and Brown. This standard set of colors gives engineers access to acetal's porosity-free, low stress and cost-effective performance in machined parts, while adding increased functionality to their end product. The breakthrough is our ability to compress the time and volume formerly necessary for colors from the resin supplier and in our own shapes production.
FDA (Food Grade) colored rods are strictly intended for industrial, pharmaceutical and food-related applications, NOT Suitable for Medical Orthopedic Use.
For Medical Applications, Use Sustarin C Medical Grade Acetal Rods
-
Acrylic Spiral Rod
Acrylic spiral rods are primarily used as decorative and structural products in P.O.P. Displays
- Sold in Full Cases Online.
- MINIMUM ORDER - PRODUCTION RUN ONLY !!
- Lead-Time Applies - REQUEST A QUOTE TODAY
-
Acrylic Triangular Bar
Acrylic triangle rods are sold in Full Boxes Only.
- There are TWO Types of Acrylic Triangular Bar.
- EQUILATERAL Triangular Bar AND RIGHT Triangular Bar
- Please confirm your preference at time of order.
- Standard lengths are 6 foot (72") (1828mm).
Standard Boxes:
- 1/8 Inch x 6 foot x 1000 pcs per Box = 30 lbs
- 3/16 Inch x 6 foot x 600 pcs per Box = 30 lbs
- 1/4 Inch x 6 foot x 300 pcs per Box = 30 lbs
- 3/8 Inch x 6 foot x 166 pcs per Box = 30 lbs
- 1/2 Inch x 6 foot x 79 pcs per Box = 31 lbs
- 5/8 Inch x 6 foot x 50 pcs per Box = 31 lbs
- 3/4 Inch x 6 foot x 34 pcs per Box = 30 lbs
- 1.0 Inch x 6 foot x 20 pcs per Box = 30 lbs
-
![Arlon® PEEK - all grades]( "Arlon® PEEK - all grades")
Arlon® PEEK - all grades
Arlon® 1000 PEEK
Arlon® 1000 is a tough, high-temperature, semi-crystalline thermoplastic offering a unique combination of mechanical, thermal, chemical and electrical properties. Recognized as the leading proprietary Polyetheretherketone (PEEK) in terms of its physical properties, Arlon 1000 is available in rod, tube and disc components as well as injection-molded and machined shapes.
Arlon® 2000 PEEK
Because of its higher glass transition temperatures, Arlon 2000 provides extreme temperature applications with improved mechanical properties to 400°F (204°C). Arlon 2000 exhibits a higher melting point and a higher glass transition temperature (Tg) than Arlon 1000. This has a significant beneficial impact on its mechanical properties at higher temperatures. Arlon 2000 exhibits higher flexural and tensile properties at higher temperatures. Arlon 2000 has yield stress values significantly higher than those for Arlon 1000. Arlon 2000 is available in custom injection molded shapes, rods and tubes.
Arlon® 1160 Glass-Reinforced Grade PEEK
Arlon 1160 is a glass-reinforced version of Arlon 1000 which delivers improved dimensional stability and reduced springing. When compared to Arlon 1000, Arlon 1160 has significantly higher tensile and flexural strength and increased shear strength. Arlon 1160 is often selected when the operating temperature exceeds 302°F (150°C). The addition of glass raises the HDT (Heat Deformation Temperature) to 608°F (320°C), increases the modulus of the material, and reduces the coefficient of thermal expansion. Other benefits include a lower coefficient of friction and improved wear properties. Arlon 1160 and related grades are successfully being used as sealing components, valve seats, bearings, compressor components and high-temperature insulators. Arlon 1160 is available in custom injection-molded shapes, rods to 1 in. (25.4 mm) diameter, tubes from .5 in. (12.7 mm) ID to 6 in. (152.4 mm) OD with a maximum cross-section of .87 in. (22 mm), and discs to 15 in. (380 mm) diameter.
Arlon® 1260 Carbon-Fiber-Reinforced Grade PEEK
Arlon 1260 is a carbon-fiber reinforced version of Arlon 1000 and has the highest modulus and tensile strength, and shear of all the Arlon grades. Designers often select Arlon 1260 when they require a low coefficient of thermal expansion. Arlon 1260 provides enhanced tribological properties, reduced friction values and improved wear properties over Arlon 1000. Arlon 1260 delivers the most benefits in lubricated bearing and/or moist environments. Arlon 1260 is available in custom injection-molded shapes, rods to .75 in. (19 mm) diameter, tubes from .5 in. (12.7 mm) ID to 6 in. (152.4 mm) OD, and discs to 15 in. (380 mm). NOTE: Arlon 1260 is subject to some limitations regarding moldings. Arlon 1260 is not recommended for shapes with a cross-section greater than .63 in. (16 mm).
Arlon® 1330 Lubricated Grade PEEK
Arlon 1330 is a lubricated version of Arlon 1000. Modifications have resulted in a "softer" material as demonstrated by the lower flexural modulus values. Friction values are also reduced. Arlon 1330 is the material of choice for valve seats and sealing components where the reduced modulus values facilitate sealing. Arlon 1330 is available in custom injection-molded shapes, rods to 1 in. (25.4 mm) diameter, tubes from .5 in. (12.7 mm) ID to 6 in. (152.4 mm) OD, discs to 15 in. (380 mm) diameter, and rings to 13 in. (330 mm) diameter.
Arlon® 1555 - Carbon-Fiber / Lubricated Grade PEEK
The compounding of carbon fibers with a lubricated version of Arlon 1000 results in a high HDT temperature, improved tensile and flexural properties at elevated temperatures and a reduced coefficient of thermal expansion. The reduced coefficient of friction and improved wear properties are also evidence of improved tribological properties. Arlon 1555 is most often used in nonlubricated or marginally lubricated bearing applications or wear surfaces. Arlon 1555 is available in custom injection-molded shapes, rods to 1 in. (25.4 mm) diameter, tubes from .5 in. (12.7 mm) ID to 6 in. (152.4 mm) OD with a maximum cross-section of 1 in. (25.4 mm) and discs to 15 in. (380 mm) diameter.
Arlon® 2400 PEEK
Arlon 2400 provides the same broad chemical resistance of other Arlon materials but with higher temperature capabilities and increased dimensional stability. Arlon 2400 has the ability to replace metal parts in high-temperature applications due to its excellent strength-to-weight ratio. This high-performance material is compatible with all well fluids and gases, from reservoir fluids with high H2S to amine-based inhibitors. Arlon 2400 improves the performance of back-up rings, Vee rings, contact blocks, bearings, bushings and other custom geometries.
Arlon® 3000 XT PEEK
Arlon 3000 XT is the polymer of choice for extreme high-temperature environments. With improved creep and extrusion resistance, it outperforms both virgin and filled grades of PEEK and PEKEKK above 350°F (177°C). It has a glass transition temperature 35°F (20°C) higher than PEEK, providing superior mechanical property retention from 350°F (177°C) âÇô 600ºF (316ºC). And it has chemical resistance comparable to PEEK, resisting all common oilfield fluids. As back-up rings, connectors, or other custom shapes, Arlon 3000 XT increases reliability and expands design headroom in high-temperature applications.
-
Celazole® TU-60 (extruded PBI-PEEK blend)
Celazole® TU-60 (Extruded PBI-PEEK blend) - Celazole TU-60 is a high performance unfilled blend, ideal for applications requiring no fillers. This material works well for complex geometries and offers the best process ability. Ideal for lamp sockets, connectors and back up seals.
- CUSTOM RUN PRODUCT - REQUEST A QUOTE TODAY
- This material is more economical than Celazole U-60 (molded)
- Color: DARK BROWN
- Supplied in Rods & Plates - Contact Us for Pricing and Lead-Times
-
![Chemours® PTFE 7A]( "Chemours® PTFE 7A")
Chemours® PTFE 7A
Chemours® PTFE 7A Sheets, Rods and Tubes are made from a white powder with very small particle size. Its most unique feature is high bulk density. The small particle size of Chemours® PTFE 7A helps to minimize voids even at relatively low molding pressure. High bulk density increases the size of moldings possible from a given mold or press opening.
Chemours® PTFE 7A is preferred for large moldings, such as billets, requiring optimum mechanical and electrical properties. It is also used in a mixture with fillers when they are added to modify the mechanical properties of moldings.
Properly processed products made from neat Chemours® PTFE 7A provide the superior properties
typical of the fluoropolymer resins: retention of properties after service at 260°C (500°F), useful
properties at —240°C (—400°F), chemical inertness to nearly all industrial chemicals and solvents, and low friction and antistick surfaces. Dielectric properties are outstanding and stable with frequency and temperature. Molded products have moderate stiffness and high ultimate elongation.
In a flame situation, products of Chemours® PTFE 7A resist ignition and do not themselves promote flame
spread. When ignited by flame from other sources, their contribution of heat is small and with very
little smoke.
-
Chemours® PTFE 8A
Chemours® PTFE 8A Sheets, Rods, Molded Tubes and Finished Parts are available from Professional Plastics.
Chemours® PTFE 8A is a free-flowing white powder composed of relatively large particles. It has high
bulk density and good powder flow. Its most unique features are improved moldability at lower
pressure and improved surface smoothness of finished parts.
The high bulk density and low compression ratio of Chemours® PTFE 8A permit the use of shallow molds
for small parts and complex shapes. Good powder flow is necessary for use in equipment that feeds
resin automatically, and for filling deep and narrow molds that are pressed isostatically. Reduced pressure
is an advantage for moldings with large surface area and for isostatic molding.
Chemours® PTFE 8A is often preferred for molding thick sheets and for isostatic moldings. It is sometimes
used for ram extrusion of rod and tubing with thicker cross sections.
-
![Chemours® PTFE 9B]( "Chemours® PTFE 9B")
Chemours® PTFE 9B
Chemours® PTFE 9B is a free-flowing white powder composed of premelted resin. It is designed for use in the ram extrusion process. Compared with other DuPont resins suitable for ram extrusion, Chemours® PTFE 9B provides outstanding resistance to charge fracture (poker-chipping) caused by excessive back-pressure during the extrusion of small-diameter rods, thin-wall tubing, and complicated profiles. Its' uniform particle characteristics make it well suited for difficult feeding conditions.
Properly processed products made from neat Chemours® PTFE 9B provide the superior properties typical of the fluoropolymer resins: retention of properties after service at 260°C (500°F), useful properties at -240°C (-400°F), chemical inertness to nearly all industrial chemicals and solvents, and low friction and antistick surfaces. Dielectric properties are outstanding and stable with frequency and temperature.
In a flame situation, products of Chemours® PTFE 9B resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution of heat is small and with very little smoke. Note: Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.
-
CPVC Sheet - CPVC Rod - Gray
CPVC shares most of the features and properties of its close relative, PVC. It is also readily workable, including machining, welding, and forming. Because of its excellent corrosion resistance at elevated temperatures, CPVC is ideally suited for self-supporting constructions where temperatures up to 200°F (93°C) are present. The ability to bend, shape, and weld CPVC enables its use in a wide variety of process applications including tanks, scrubbers, and ventilation systems. It exhibits excellent fire resistance, chemical resistance, and is readily available in sheets, rods, and tubing.
- Color: Light Gray
-
CPVC Welding Rod - Gray
CPVC shares most of the features and properties of its close relative, PVC. It is also readily workable, including machining, welding, and forming. Because of its excellent corrosion resistance at elevated temperatures, CPVC is ideally suited for self-supporting constructions where temperatures up to 200°F (93°C) are present. The ability to bend, shape, and weld CPVC enables its use in a wide variety of process applications including tanks, scrubbers, and ventilation systems. It exhibits excellent fire resistance, chemical resistance, and is readily available in sheets, rods, and tubing.
- Color: Light Gray
- Also available in: WHITE CPVC (PVC-C) FM4910
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
