-
Varglas ES-4400 Silicone Rubber Sleeve (R 220° C)
Varglas ES-4400 Silicone Rubber Sleeving is produced by curing a specially compounded silicone gum with a select catalyst on a continuous length of fiberglass braid. Most silicone rubber is characterized, chiefly, by its capability of performing satisfactorily at elevated temperatures. Varglas ES-4400 Silicone Rubber, in addition to providing superior dielectric and thermal protection, at less weight, was developed to meet unusual fluid and flame resistance requirements. Its high temperature performance places it in a 220°C classification.
Specifications:
Varglas ES-4400 Silicone Rubber Sleeving conforms to, and is listed on the Qualified Products List (QPL) for, MIL-l-3190/8, latest revision (Grade A). It also exceeds the requirements of NEMA TF-1, Type 5; and ASTM-D372.
Under the Component Program of Underwriters Laboratories, Grade A Varglas ES-4400 Silicone Rubber is recognized for 200°C, 600 volt service and complies with VW-1 flammability requirements under UL File #E63450. (VW-1 compliance of Grades B through C-1 is covered under UL File #E53690.) CSA International certified the use of Grade A for 200°C, 600 volt service and flammability requirements under CSA File #LR58486 VW-1/FT1. Varglas ES-4400 is incorporated in systems work, per UL Safety Standard 1446, to facilitate product acceptance by UL.
Applications:
Varglas ES-4400 Silicone Rubber Sleeving's superior dielectric strength, high and low temperature performance, and excellent fluid and flame resistance make it ideally suited for use in industrial instrumentation for measurement, analysis and control; surgical, medical and optical instruments and apparatus; electrical and electronic machinery and equipment; and aircraft and other transportation equipment where its lighter weight provides an additional performance advantage.
More Info ...
-
Varglas Hermetic Sleeving
Varglas Hermetic Sleeving is produced by coating braided fiberglass with a highly-crosslinked, modified acrylic copolymer that is extremely flexible yet very tough and abrasion resistant. It is highly resistant to refrigerants, at both high and low temperatures, and compatible with potting compounds and varnishes. Varglas Hermetic Sleeving offers good resistance to thermal shock and is unaffected by most common oils including xylol/paraffin oil (50/50 mixture by volume), refrigeration lubricants Suniso™ 3-G (a mineral oil), Icematic® SW100 (a synthetic polyol-ester oil), and ZEROL® 150 (a synthetic alkylbenzene oil) and solvents including methylene chloride, toluene, xylene and 1,1,1 trichlorethane. Designed specifically for hermetic motors, its' low extraction levels of soluble materials protect against contamination, as well as clogging, within the compressor system.
- Varglas Hermetic Sleeving meets the requirements of NEMA TF-1, Type 2, and ASTM-D372.
More Info ...
-
Varglas Non-Fray Sleeving
Varglas Non-Fray Sleeving is flexible, high-temperature secondary insulation made from closely braided, continuous filament fiberglass which has been heat-cleaned to remove impurities in the yarn and to retard fraying. There are four types available all of which are noncorrosive and nonflammable and not attacked by fungus.
Type H: Heat cleaned only. Since it is not treated with sizing or pigments after heat cleaning, it is available only in the natural (silver) color.
Type HO: Heat cleaned and treated with an acrylic resin binder (natural or pigmented).
Type HP: Heat cleaned and treated with an acrylic resin binder (natural or pigmented) that is slightly more flexible than Type HO.
Type HM: Heat cleaned and treated with an oleoresinous varnish binder (natural or pigmented).
Binders are applied to further retard fraying and to hold sleeving round for cutting. Types HO, HP and HM are available in a variety of colors which may be less vivid after exposure to 150°C. All four types are available in various wall thicknesses. All will serve as secondary insulation unaffected indefinitely through a temperature range from -60°C to 316°C and withstand up to 616°C for shorter periods. Since there is no impregnant that will provide dielectric protection at those extremes, these sleevings require heavy or multiple-wall thicknesses if used as primary insulation.
Specifications:
Varglas Non-Fray Sleevings conform to NEMA TF-2 and are made from glass fibers conforming to Military Specification MIL-Y-1140 (latest revision), Class C, Form 1 (continuous filament yarns).Under the Component Program of Underwriters Laboratories, all Varglas Non-Fray Sleevings comply with VW-1 flammability requirements under UL File #E53690. They are incorporated in systems work, per UL Safety Standard 1446, to facilitate product acceptance by UL.
Applications
Varglas Non-Fray Sleevings are used for thermal and mechanical protection in consumer, commercial and industrial applications where flexibility, abrasion resistance or additional secondary insulation is required and particularly when temperature extremes prohibit the use of other materials. These would include such applications as heating appliances, electric motors, resistors, lighting fixture transformers and ballasts, etc.
Non-Fray™S greater flexibility and expandability find extensive use in wire harness assemblies where its ease of installation over irregular shapes and wire bundles provides definite assembly advantages.
In 1/32" Wall, Non-Fray is used as primary insulation in low-voltage applications such as coffeemakers, hand irons, toasters, hot plates, range units and other appliances.
More Info ...
-
Varglas Silicone Rubber Sleeving (Grade H - 200° C)
Varglas Silicone Rubber Sleeving (Grade H - 200° C) is produced by coating braided fiberglass with a high-performance silicone rubber that is extremely flexible and exhibits unusual toughness and abrasion resistance. In addition to having a Class 200°C rating, its brittle point of -73°C also suggests its use in a wide range of applications requiring resistance to temperature extremes.
Specifications:
Varglas Silicone Rubber Sleeving conforms to, and is listed on the Qualified Products List (QPL) for, MIL-l-3190/6, latest revision (Grade A); NEMA TF-1, Type 5; and ASTM-D372 .Under the Component Program of Underwriters Laboratories, Grade A Varglas Silicone Rubber is recognized for 200°C, 600 volt service and complies with VW-1 flammability requirements under UL File #E63450. (VW-1 compliance of Grades B through C-3 is covered under UL File #E53690.) CSA International certifies the use of Grade A for 200°C, 600 volt service and flammability requirements under CSA File #LR58486 VW-1/FT1. Varglas Silicone Rubber is incorporated in systems work, per UL Safely Standard 1446, to facilitate product acceptance by UL.
Applications:
Varglas Silicone Rubber Sleeving is used in appliances, motors and generators as well as in automotive, marine and aircraft electrical and electronic components such as transformers, coils, relays, etc. where a 200°C thermal rating is required. In addition to being well-suited as heavy duty insulation where subjected to high heat, such as in die-casting and plastic molding, Varglas Silicone Rubber Sleeving is also suitable for use in extremely low-temperature environments such as high altitude and aerospace applications.
More Info ...
-
Varglas Viton® 231 Sleeving (Grade R 220° C)
Varglas Viton® 231 Sleeving is a braided fiberglass/modified Viton® composite with exceptional physical and electrical properties. It has excellent abrasion and cut-through resistance and offers improved flexibility throughout a wide operating temperature range. Its resistance to solvents, both aromatic and aliphatic; fuels, including JP-5; and oils, including Skydrol; place this fluoroelastomer above other available polymer-coated fiberglass braids.
Specifications:
Varglas Viton® 231 Sleeving conforms to, and is listed on the Qualified Products List (QPL) for, MIL-l-3190/7, latest revision (Grade A), and exceeds the requirements of NEMA TF-1 and ASTM-D372.Under the component program of Underwriters Laboratories, Varglas Viton® 231 Sleeving complies with VW-1 flammability requirements under UL File #E53690. It is incorporated in systems work, per UL Safety Standard 1446, to facilitate product acceptance by UL.
Applications:
Varglas Viton® 231 Sleeving is used in DC generators and motors to reduce arcing problems and elsewhere when the need to maintain a silicone-free environment is important. Its flame resistance and excellent resistance to abrasion make it ideally suited for the insulation of leads and connections of critical electrical components as well as for wire harnesses in areas where continuous operating temperatures run as high as 220°C. Varglas Viton®231 is also used in transformers where resistance to high impingement velocity oils is required and, generally, where better solvent and oil resistance is needed.
More Info ...
-
Vinyl Coated Fiberglass Sleeving - 310 B
Vinyl Coated Fiberglass Sleeving - 310 B 310B SERIES is used as supplementary insulation on motors, generators, and transformers. Additionally, 310B SERIES has found applications in the radio, television and electronics industries as termoinal insulation where operating temperatures are 130 ° C or lower. Its flame resistance renders 310B SERIES ideal for applications involving soldered splices and terminations.
- Thermal Class: 130° C
- IEEE service temperature: -20 ° C to 130 ° C
- NEMA: TF-1, TYPE 3
- MIL-I-3190, MIL-I-21557
- Flamability: VW-1
- UL FILE: E86619 & E123956
- CSA- LR94072
More Info ...
-
VinylGuard® Conveyor Roller Sleeve
VinylGuard® Conveyor Roller Sleeve - PVC T-105 Conveyor Roller sleeves heat shrink over roller mandrels to provide a smooth, chemical resistant service wich makes easier clean-up & handling while reducing vibration and noise. These low-cost sleeves are are excellent option for improving efficiency in material handling equipment. Great option for protecting glass or other surfaces that might otherwise scratch during produciton & handling. Just slide over madrels & heat with a heat gun to create a snug fit.
More Info ...
-
Volcano Wrap - Insulation to 1500° F
Volcano Wrap - Woven Volcanic Rock Tape Withstands Heat up to 1,500°F
VOLCANO WRAP (VW) is made from continuous filament basalt fiber and is engineered for protection from temperatures 1,500°F. When wrapped around exhaust pipes, the unique construction creates attractive and durable finished product.
Volcano Wrap is 25% stronger and provides a 300°F increase in temperature protection over fiberglass wrap. The product is very rugged, and will not exhibit any vibration damage over long periods of use.
- The volcanic rock fiber wrap is easy to install and will provide years of protection and good looks.
- Volcano Wrap is available in Basalt.
More Info ...
-
WinPro™ Window Grade Polycarbonate - Gray Tint
WinPro™ Gray Tint is a window grade polycarbonate sheet made from optical grade polycarbonate resin. It is ideal for use in a variety of applications, ranging from containment to fabricated parts. This newly developed polycarbonate sheet products extends the thickness range offered from standard extruded polycarbonate glazing sheets. While other non-laminated glazing grades are produced with a maximum thickness of .500", WinPro™ PC1000 sheet range in thickness from .750" thick up to 2" thick. This high-grade polycarbonate sheet offers extremely high impact strength and high modulus of elasticity. Typical applications include sight windows for tanks/vessels, viewport windows, medical parts and some military parts. The sheet features excellent clarity, dimensional stability and good dielectric properties. It offers excellent thermal performance and is fabrication friendly.
WinPro™ PC1000 demonstrates low levels of black specks or other impurities, and is UV stable. It's superior toughness combined with its clarity and excellent dimensional stability, makes it the product of choice in many demanding applications.
More Info ...
-
ABS Plastic Resin
ABS is a thermoplastic resin commonly used for injection molding applications. ABS (Acrylonitrile Butadiene Styrene) generally possesses medium strength and performance at medium cost. It is available in multiple grades, colors, and Izod impact ratings.
End uses of ABS materials include tub/shower surrounds, pickup truck caps, boat accessories, automotive trim parts, and computer housings.
More Info ...
-
ABS Sheet - GP Forming Grade
ABS Sheet (General Purpose ABS Plastic Sheets - thermoforming grade) is offered by Professional Plastics in a wide range colors & grades. ABS Sheets are produced in monolayer and co-extruded multilayer. Stocked in Standard Black and White with Hair Cell Finish on 1 Side. Custom colors also available. Custom formulations can be combined to provide performance an cost saving options such as Virgin Cap + Utility Base, Low Gloss (matte) Cap + Utility Base, and Custom Color Cap + Utility Base.
- Standard ABS Sheet Finish is Hair Cell 1 Side (Textured 1 Side, Smooth 1 Side)
- GP Forming Grade ABS Sheet is Durable and Easily Vacuum-Formed
More Info ...
-
Acetal Sheets & Acetal Rods (Copolymer)
Acetal Sheets and Acetal Rods (aka POM) acetal copolymer plastic sheets and acetal rods provide high strength and stiffness coupled with enhanced dimensional stability and ease of machining. Acetal Rods and Acetal Sheets are also characterized by a low coefficient of friction and good wear properties especially in wet environments. Because of its high strength, modulus, and resistance to impact and fatigue, Acetal is used as a weight-saving metal replacement. Acetal copolymer overcomes the common problem of centerline porosity in large shapes of Acetal Homopolymer (aka Delrin)
- Acetal Copolymer is preferred to Delrin® in high-pressure applications where centerline porosity is a concern.
- Acetal Copolymer is produced under several brand names including Celcon®, Ultraform® & Acetron®.
More Info ...
-
ACRIFIX® cements
ACRIFIX® cements are ideal for bonding ACRYLITE® products as well as other acrylic (PMMA) sheet. Each product offers distinctive properties for your application and fabrication needs.
Wondering which ACRIFIX® Product to Use ? (solvent or cement ?)
Quick Dry Solvents
Methylene chlorid free types:
- ACRIFIX® 1S 0117 - WATER THIN
- ACRIFIX® 1S 0116 - VISCOUS
High End Polymerizing Cements
Outdoor Types:
- ACRIFIX® 2R 0190 - Transparent Bubble Free
- ACRIFIX® 2R 0195 - Satin Finish
- ACRIFIX® 1R 0192 - Fast UV Curing
No Water Contact Types:
- ACRIFIX® 2R 1074 - Accelerated curing
More Info ...
-
-
Acrylic Rods - Cast - Machine Grade - COLORS
Machine-Grade Cast Acrylic Rods feature extremely strong breakage resistance and quick cutting times, without compromising on aesthetic appeal. These rods and tubes can be cut and altered to your exact specifications, but still allow for easy finishing and a quality look and feel for your products.
- Applications include Displays ,Grab Bars, Light Bars, Medical Devices, Duck Calls, Arts & Crafts
Professional Plastics stocks the largest supply of colored Cast Acrylic Rods in the industry. We supply these rods to custom fabricators include many of the major duck call manufacturers across the country.
- Stock colors include Black, Blue, Red, Green, and other colors in both standard and pearlescent.
- Massive stock of colored acrylic rods are on-hand at our Carrollton, Texas location.
More Info ...
-
Acrylic Rods - Extruded Plexiglass Rod
Plexiglass Extruded Acrylic Rods are available from Professional Plastics in standard 6 foot lengths (full cases only). These economical plexiglass acrylic rods are excellent for use in POP Displays and other decorative items. They are normally supplied in a paper sleeve to protect during handling, but keep in mind that extruded acrylic rods do not have the optical clarity or machining characteristics of cast acrylic rod. In larger diameter rods (.875" dia and above) these high-quality extruded rods are commonly used as grab bars in showers, tubs and spas. Acrylic is moisture resistant, non-toxic and meets standard building codes for use in these applications.
- Extruded Plexiglass Acrylic Rods are NOT for Machining.
- For Machinable, Acrylic Rods, use CAST Acrylic Rods (sold by the foot)
More Info ...
-
Aircraft Supplies
Aircraft supplies and compoents are available from Professional Plastics. Since 1984, Professional Plastics has been supplying the widest variety of plastics to aircraft and industrial customers worldwide.
Products include: Aircraft Grade Acrylic (Mil-P-5425 & Mil-P-8184), Phenolics, Delrin, Teflon, Spiral Wrap Tubing, Adhesives, Electrical Sleeving, High-Temp Films, Composite Manufacturing supplies, Aircraft Foam, Tapes, Velcro, Specialty Tubing, Films and much more.
Our website offers more than 500 different materials and more than 2,000 pages of data sheets, descriptions, machining guidelines, and application profiles; as well as Military, Federal and Commercial specifications
More Info ...
-
Albuquerque Plastic Supply
Albuquerque Plastic Supply - The city of Albuquerque, New Mexico is serviced in 1-2 business days from our Phoenix, AZ location. Established in 1984', Professional Plastics is a leading supplier of plastic sheets, rods, tubing and films. Stock materials include: Plexiglass / Acrylic, Polycarbonate / Lexan, PVC, ABS, UHMW, Delrin, Nylon, Ultem, PEEK, Teflon, Vespel, Meldin, Torlon, Kynar, Polypropylene, HDPE, and hundreds more.
Albuquerque Sales & Support: Toll-Free (888) 995-7767
More Info ...
-
Aluminum
Aluminum shapes (aluminum plates, bars & profiles) are available for online purchase from Professional Plastics.
Aluminum 6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration. 6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers.
ALUMINUM ANGLE - ALUMINUM CHANNEL - ALUMINUM FLAT BAR - ALUMINUM HEX BAR - ALUMINUM I-BEAM - ALUMINUM PERFORATED SHEET - ALUMINUM PIPE - ALUMINUM ROUND ROD - ALUMINUM SHEET / PLATE - ALUMINUM SHEET - SAMPLE PACK - ALUMINUM SQUARE BAR - ALUMINUM TREAD BRITE - ALUMINUM TUBE - RECTANGLE ALUMINUM TUBE - ROUND ALUMINUM TUBE - SQUARE
- Price & Availabilty of Metals & Alloys is subject to change.
- Send your Request for Quote Today
- Professional Plastics has warehouse and logistics capabilities in the USA, Singapore and Taiwan.
More Info ...
-
AMS Specification Listing
Spec | Description |
3564B | Fiber Sheet-Vulcanized |
3570A | Polyurethane Foam, Flexible-Open Cell Medium Flexibility, 2.5 lb. per cu. ft. |
3580 | Plastic Castings-Methyl Methacrylate, General Purpose |
3581 | Plastic Castings-Methyl Methacrylate, Heat Resistant |
3590A | Plastic Sheet, Copper Faced-Paper Reinforced Phenol-Formaldehyde |
3598A | Plastic Sheet, Copper Faced-Glass Fabric Reinforced Polytetrafluoroethylene |
3601B | Plastic Sheet, Copper Faced-Glass Fabric Reinforced Epoxy Resin |
3605D | Plastic Sheet-Post Forming, Cotton Fabric Reinforced Phenol-Formaldehyde |
3607C | Plastic Sheet & Plate-Post Forming, Cotton Fabric Reinforced Phenol-Formaldehyde |
3608 | Plastic Sheet-Methyl Methacrylate, General Purpose |
3609 | Plastic Sheet-Methyl Methacrylate, Heat Resistant |
3610C | Sheet-Water Vapor Resistant, Flexible, Transparent |
3611A | Plastic Sheet-Polycarbonate |
3612 | Polyester Film, Electrical Grade, General Purpose |
3615B | Plastic Tubing-Cotton Fabric Reinforced Phenol-Formaldehyde |
3617 | Plastic Moldings & Extrusions-Polamide (Nylon) |
3620B | Plastic Moldings & Extrusions-Polystyrene |
3622A | Plastic Moldings & Extrusions-Cellulose Acetate, General Purpose |
3623 | Elastomeric Tubing-Electric Insulation, Irradiated Polychloroprene, Flexible, Heat Shrinkable, 1.750 to 1 Shrink Ratio |
3624A | Plastic Moldings & Extrusions-Cellulose Acetate Butyrate |
3625 | Elastomeric Tubing-Electrical Insulation, Crosslinked Silicone, Pigmented, Flexible, Heat Shrinkable, 1.750 to 1 Shrink Ratio |
3626C | Plastic Moldings & Extrusions-Methyl Methacrylate |
3627 | Plastic Moldings & Extrusions-Methyl Methacrylate, Heat Resistant |
3628A | Plastic Moldings & Extrusion-Polycarbonate |
3629 | Tubing-Extruded-Polyvinyl Chloride, High Temperature, Electrical Insulation |
3630 | Plastic Extrusions-Flexible-Polyvinyl Chloride |
3631 | Plastic Extrusions-Flexible, High Temperature Polyvinyl Chloride |
3632B | Plastic Tubing-Electrical Insulation, Irradiated Polyvinylidene Flouride, Heat Shrinkable, Semi-Rigid, 2 to 1 Shrink Ratio |
3633 | Plastic Tubing-Electrical Insulation Irradiated Polyolefin Heat Shrinkable |
3634 | Plastic Tubing-Electrical insulation, Polyolefin Dual Wail, Semi-Rigid, Heat Shrinkable |
3635A | Plastic Sheet-Cellular, Shock Absorbing, Closed Cell, Foamed, Modified Vinyl Sheet |
3636B | Plastic Tubing-Electrical Insulation, Irradiated Polyolefin, Heat Shrinkable, Pigmented, Flexible, 2 to 1 Shrink Ratio |
3637B | Plastic Tubing-Electrical Insulation, Irradiated Polyolefin, Clear Flexible, Heat Shrinkable, 2 to 1 Shrink Ratio |
3638B | Plastic Tubing-Electrical Insulation, Irradiated Polyolefin, Semi-Rigid, Pigmented Heat Shrinkable, 2 to 1 Shrink Ratio |
3639B | Plastic Tubing-Electrical Insulation, Irradiated Polyolefin. Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio |
3640B | Plastic Moldings-Melamine-Formaldehyde, Mineral Filled |
3641A | Plastic Moldings, Thermosetting-Phenol- Formaldehyde, Macerated Fabric Filling |
3642A | Plastic Moldings-Laminated, Thermosetting Resin, Glass Fabric Reinforced Heat Resistant 500F |
3643 | Plastic Moldings. Thermosetting-Glass Flowing Filled Silicone, Heat Resistant |
3645 | Polytrifluorochloroethylene, Compression Molded-Heavy Sections, Unplasticized (Kel-F) |
3646 | Polytrifluorochloroethylene Molded Sheet, Unplasticized |
3647 | Polyfluoroethylenepropylene Film & Sheet |
3648 | Polytrifluorochloroethylene- Tubing. Unplasticized (Kel-F) |
3649A | Polytrifluorochloroethylene-Film, Unplasticized (Kel-F) |
3650A | Polytrifluorochloroethylene-Unplasticized (Kel-F) |
3651C | Polytetrafluoroethylene (Teflon) |
3652A | Polytetrafluoroethylene Film (Teflon) |
3653 | Extruded Polytetrafluoroethylene- Tubing, Electrical Insulation, Standard Wall (Teflon) |
3654A | Extruded Polytetrafluoroethylene- Tubing Electrical insulation, Light Wall (Teflon) |
3655 | Extruded Polytetrafluoroethylene- Tubing, Electoral Insulation, Thin Walt (Teflon) |
3656A | Polytetrafluoroethylene Extrusions, Radiographically inspected, Normal Strength-As Sintered |
3657 | Polytetrafluoroethylene Extrusions, Radiographically inspected, Premium Strength-As Sintered |
3658 | Polytetrafluoroethylene Extrusions, Radiographically inspected, Premium Strength, Stress Relieved |
3659 | Polytetrafluoroethylene Extrusions, Premium Strength, Stress Relieved |
3660 | Polytetrafluoroethylene Moldings, As Sintered-General Purpose Grade |
3661 | Polytetrafluoroethylene Film, Premium Grade |
3662 | Polytetrafluoroethylene Film, General Purpose Grade |
3663 | Fabric, Glass-Vinyl Coated, Porous |
3664 | Fabric, Glass-Vinyl Coated |
3666 | Polytetrafluoroethylene Sheet, Glass Fabric Reinforced |
3667 | Polytetrafluoroethylene Sheet-Molded, As Sintered-General Purpose Grade |
3668 | Polytetrafluoroethylene-Moldings, Premium Grade, As Sintered |
3676A | Insulation, Sound & Thermal-Resin Bonded Glass Fiber, Medium Filament 3828 |
3681 | Adhesive, Electrically Conductive-Silver Organic Resin |
3682 | Coating, Electrically Conductive-Silver 3835 Organic Resin |
3685 | Adhesive -Synthetic Rubber-Buna N Type |
368O | Insulation, Thermal-Silica Fiber |
3690 | Adhesive Compound-Epoxy, Room Temperature Curing |
3691 | Adhesive Compound-Epoxy, Medium 3842 Temperature Application |
3692 | Adhesive Compound-Epoxy, High Temperature Application |
3693 | Adhesive Modified-Epoxy-Mad. Heat Resist., 250 F Curing, Film Type |
3710 | Sandwich Structures-Glass Fabric-Resin, Low Pressure Molded, Heat Resistant 3852A |
3720 | Paper Honeycomb-60 lb. Paper |
3722 | Paper Honeycomb-125 lb. Paper |
3730 | Potting Compound-Foamed Epoxy Type, Amine Hardened |
3734 | Potting Compound- Epoxy, Unfilled, General Purpose-Room Temperature Cure 3870A |
3735A | Potting Compound- Epoxy, Filled, 10-15 CTE, 225 HDT |
3736 | Potting Compound-Epoxy, Filled, 25-30 CTE. 175 HDT, Room Temperature Cure |
3738A | Potting Compound-Epoxy, Filled, 15-20 CTE, 180 HDT |
3739A | Potting Compound-Epoxy. Filled, 9-12 CTE, 250 HDT |
3740A | Potting Compound-Epoxy, Filled, 15-20 CTE, 225 HDT, Free Machining |
3750 | Potting Compound-Epoxy, Flexible, Durometer 75-85 |
3780 | Copper Wire-Polytetrafluoroethylene Covered, Miniature |
3781 | Copper Wire-Magnet, Single Film Insulated, High Temperature |
3802B | Cloth-Airplane Cotton, Mercerized, 50 lb. Breaking Strength |
3804A | Cloth-Airplane Cotton, Mercerized, 65lb. Breaking Strength |
3806B | Cloth-Airplane Cotton, Mercerized, 80 lb. Breaking Strength |
3810A | Tape-Adhesive-Cloth Back |
3815A | Braid, Flat, Nylon-Electrical Tying, Synthetic Rubber Coated |
3816 | Braid, Flat, Nylon-Electrical Tying, Wax Coated |
3817A | Braid, Flat, Nylon-Electrical Tying, Resin Coated |
3825 | Fabric, Glass (181)-Chrome Treated Glass Roving, Epoxy Resin Preimpregnated, Type E Glass |
3830 | Cloth-Silica "B" Stage Phenolic Resin Impregnated High Pressure Molding Fabric, Glass (181) - Decorative Grade |
3839 | Fabric, Asbestos Wire Reinforced, Polytetrafluoroethylene Impregnated Sintered |
3840 | Asbestos-Polytetrafluoroethylene impregnated, Sintered Asbestos Fiber Reinforced-Polytetrafluoroethylene Sheet, TFE Fluorocarbon Resin |
3843 | Asbestos Fiber Reinforced-Polytetrafluoroethylene Sheet, TFE Flourocarbon Resin-High Compressibility |
3851A | Fire Resistant Properties for Aircraft Materials Flame Resistant Treatment of Inferior Materials |
3855A | Flame Resistance Treatment of Inferior Fabrics |
3858 | Asbestos Felting-"B" Stage Phenolic Resin impregnated, Low Pressure Molding Ceramic-Moldings & Extrusions, Dense Ultra-High Alumina (99% AL2O3) |
3880 | Crystallized Glass Ceramic |
More Info ...
|