-
Acrylic Rods - Extruded Plexiglass Rod
Plexiglass Extruded Acrylic Rods are available from Professional Plastics in standard 6 foot lengths (full cases only). These economical plexiglass acrylic rods are excellent for use in POP Displays and other decorative items. They are normally supplied in a paper sleeve to protect during handling, but keep in mind that extruded acrylic rods do not have the optical clarity or machining characteristics of cast acrylic rod. In larger diameter rods (.875" dia and above) these high-quality extruded rods are commonly used as grab bars in showers, tubs and spas. Acrylic is moisture resistant, non-toxic and meets standard building codes for use in these applications.
- Extruded Plexiglass Acrylic Rods are NOT for Machining.
- For Machinable, Acrylic Rods, use CAST Acrylic Rods (sold by the foot)
More Info ...
-
Acrylic DP-30 (Acrylite FFX) Stippled Sheet
ACRYLITE® FFX (aka Acrylic DP-30) acrylic sheet offers a decorative, double-sided stipple texture, 69% light transmission, and easy fabrication. It is ideal for applications such as chair mats and cutting boards.
ACRYLITE® FXS acrylic sheet offers a decorative, one-sided stipple finish and easy fabrication, ideal for cutting boards
More Info ...
-
Acrylic Rods - Cast Plexiglass Rod - CLEAR
Plexiglass Cast acrylic rods offer excellent clarify & machining characteristics when compared to extruded rods. This material offers good chemical-resistance & is FDA approved for food contact.
Acrylic offers high light transmittance and can be easily heat-formed without loss of optical clarity. Prolonged exposure to moisture, or even total immersion in water, does not significantly effect the mechanical or optical properties of this outstanding economical and multi-purpose material.
- Standard Cast Plexiglass Full-Length Rods are 8 Foot Long
More Info ...
-
Acrylic - Non-Glare Sheet (Acrylite® P-99)
Non-Glare Acrylic Sheet
- ACRYLITE P-99 Non-Glare acrylic sheet was created to minimize glare and reflection and maximize the unhindered viewing of framed artwork. Its matte finish shows the art and nothing but the art from almost any angle and under typical lighting conditions. Acrylite® P-99 sheet, continuously manufactured, is lightweight and easily fabricated, offering a non-glare surface that can be painted or silk-screened. It is ideal for picture framing. Note: Sheet appears slightly hazy until it is placed directly on top of artwork. Once placed on artwork, the clarity comes through and the artwork is easily viewed without the glare associated with standard acrylic sheet.
Types of Premium Framing & Museum Display Grade Acrylic:
- Acrylite® P-99 sheet - Standard Non-Glare Acrylic Sheet (As Sold Here)
- ACRYLITE® OP-3 P-99 sheet - combines P-99 non-glare with OP-3 UV filtering characteristics
- ACRYLITE AR P-99 - sheet combines abrasion resistance with non-glare performance.
- ACRYLITE® OP-3 sheet - UV protective acrylic sheet, filters out 98% of damaging ultraviolet rays.
- ACRYLITE® AR OP-3 sheet - OP-3's UV protection with added Abrasion-Resistant Coating
- ACRYLITE® OP-2 sheet - filters 98% of the harmful ultraviolet light portion of sunlight.
More Info ...
-
Acrylic Sheet - Bullet-Resistant Polycast
Bullet Resistant Cast Acrylic Sheet - Ballistics protection with superior optical clarity.
Level # 1 - MP 1.25 is one of our thinnest and lightest bullet resisting products. It protects against handguns of medium power, such as the 9 mm and Super 38 Automatic - any handgun with a muzzle energy of 380 to 460 foot-pounds. It is offered with and without Polycast SAR Super Abrasion-Resistant coating.
- Protection - 9 mm
- Optical Properties - Transmission: >90%; Haze <1%
- U.L. Designation - 752, Level 1
- Thickness - 1.25"
- Polycast SAR™ Coating - Optional
Level # 2 - MP 1.25 For thin, light, crystal-clear protection against high-power handguns, it's tough to beat HP 1.25. It protects against handguns such as the .357 magnum and others with a muzzle energy of 548 to 663 foot-pounds. Polycast SAR Super Abrasion-Resistant coating is standard.
- Protection - .357 Magnum
- Optical Properties - Transmission: >90%; Haze <1%
- U.L. Designation - 752, Level 2
- Thickness - 1.378"
- Polycast SAR™ Coating - Standard
Level # 3 - MP 1.25 Polycast also offers ballistics protection and superior optical clarity against virtually all handguns, including those of super power, such as the .44 magnum. An abrasion resistant coating is standard and the sparkling clarity after machining and polishing outshines all products in it's class. Our unique design for Polycast SP 1.25 has proven to have ballistic protective capability which exceeds the criteria set forth in U.L. Level 3 requirements.
- Protection - .44 Magnum
- Optical Properties - Transmission: >85%; Haze <1.5%
- U.L. Designation - 752, Level 3
- Thickness - 1.25"
- Polycast SAR™ Coating - Standard
Level # 6 - SMG 1.25 Polycast also offers ballistics protection and superior optical clarity against multiple shots from a submachine gun, such as a 9mm Uzi. An abrasion resistant coating is standard and the sparkling clarity after machining and polishing outshines all products in its class. Our unique design for Polycast SMG 1.25 has proven to have ballistic protective capability which exceeds the criteria set forth in U.L. Level 6 requirements.
Protection - Submachine-gun / Uzi
- Optical Properties - Transmission: >85%; Haze <1.5%
- U.L. Designation - 752, Level 6
- Thickness - 1.25"
- Polycast SAR™ Coating - Standard
- Not Available in Tints
More Info ...
-
Acrylic Rods - Cast - Machine Grade - COLORS
Machine-Grade Cast Acrylic Rods feature extremely strong breakage resistance and quick cutting times, without compromising on aesthetic appeal. These rods and tubes can be cut and altered to your exact specifications, but still allow for easy finishing and a quality look and feel for your products.
- Applications include Displays ,Grab Bars, Light Bars, Medical Devices, Duck Calls, Arts & Crafts
Professional Plastics stocks the largest supply of colored Cast Acrylic Rods in the industry. We supply these rods to custom fabricators include many of the major duck call manufacturers across the country.
- Stock colors include Black, Blue, Red, Green, and other colors in both standard and pearlescent.
- Massive stock of colored acrylic rods are on-hand at our Carrollton, Texas location.
More Info ...
-
-
Acrylic DP-95 Sheet (aka Acrylite® DP-9)
ACRYLITE® DP-9 sheet is the same product as Acrylite P-95 with the matte finish on BOTH sides for the same finished look from any viewing angle. Select from a plethora of colors with varying degrees of transmitted and reflected light from colorless to translucent to opaque.
ACRYLITE® P-95 sheet offers transparent clarity when in DIRECT CONTACT with objects. Ideal for signs and displays, its one-sided matte finish reduces reflected light. This cell cast sheet comes in colorless, translucent, and custom colors. ACRYLITE® P-95 acrylic sheet has a velvety smooth surface on ONE side (SC) and is engineered to enhance a wide variety of design applications.
ACRYLITE® DP-9 (aka DP-95) acrylic sheet is the same premium-grade
cell cast sheet but with the velvety smooth surface on BOTH sides (DC)
for a finished look FROM ANY VIEWING ANGLE. With its extremely smooth,
soft appearance it just begs to be touched.
Both products are available in a plethora of colors with varying degrees of
transmitted light — from colorless to translucent to opaque. With its unique
light diffusing surface, the options for using these velvety materials are
almost endless: retail displays, furniture, interior designs, light fixtures,
signs and all other applications where an elegant but trendy look is desired.
Standard Product Specifications:
- Sheet Sizes: 48" x 72", 48"x 96", 60" x 96", 72" x 96"
- Thicknesses: .118" to .944" (up to 1.5" upon request)
- Colors: Colorless, glass-green edge and a wide range of colors
More Info ...
-
Acrylic Spiral Rod
Acrylic spiral rods are primarily used as decorative and structural products in P.O.P. Displays
- Sold in Full Cases Online.
- MINIMUM ORDER - PRODUCTION RUN ONLY !!
- Lead-Time Applies - REQUEST A QUOTE TODAY
More Info ...
-
Acrylic Strip Heater
Acrylic Strip Heater - An acrylic plastic sheet can be placed on these heavy-duty strip heaters until it is soft and pliable enough to bend to the desired form. Capable of heating sheets up to 1/2" thick. Easy to use, this professional grade acrylic strip heater is great for everything small jobs to high-volume production.
- EMX-2 P/N 60-4816 - 48" long x 7" wide - 625 Watts - 115AC Volts
More Info ...
-
-
Acrylic Film - Impact Modified
SolaTuf® Impact Modified Acrylic Film offers seven to ten times the falling dart impact strength of conventional acrylics. SolaTuf also has good chemical resistance, superb weatherability, UV resistance and transparency that far exceeds polycarbonate film.
Manufactured to the most stringent quality standards, SolaTuf delivers the clarity and dimensional stability, surface texture and gloss control required for the most critical applications.
SolaTuf is available in a wide variety of transparent colors and opaque colors. It can be manufactured using different resin formulations to meet specific or custom film performance requirements such as UV transmission and light transmission. SolaTuf is also available in the same standard industry textures (gloss/gloss, velvet/matte, velvet/gloss, matte/gloss, and suede/matte) as our polycarbonate film.
More Info ...
-
Acrylic Sheet - Stained Glass
Acrylic Sheet - Stained Glass - These decorative high-gloss acrylic sheets come in dozens of designer colors and styles for applications ranging from lighting, furniture, glazing, and artwork. These sheets are suited to design projects in commercial offices, restaurants, hotels & high-end residences.
Acrylic sheets are available in the following decorative styles:
- Stained Glass (as shown) - Pearls - Glitter - Marble - Stipple (P30) - Granite - Rain - Fluorescent
More Info ...
-
Acrylic IR Sheet - Infrared Transmitting
Acrylic IR Sheet - Infrared Transmitting. A special formula that blocks all visible light, but allows infrared wavelengths to pass through. Specially suited for sophisticated security systems based on infrared technology.
More Info ...
-
Acrylic Laser Cut Shapes (circles, squares, diamonds)
Acrylic can be laser cut in various shapes including circles, squares & diamonds. Professional Plastics' Paragon division in Chino, California operates two high-end laser cutters for precision laser-cut parts and engraving. Laser cut materials include Acrylic, PETG, and more.
Laser-cut acrylic parts have a water clear edge that does not require further polishing for a brilliant look.
More Info ...
-
Acrylic Coated Fiberglass Sleeving
Acrylic Coated Fiberglass Sleeving - 400F Series - 400F SERIES acrylic coated sleeving is a universal sleeving used in fractional as well as integral horsepower motor leadouts and crossovers, dry and oil-filled transformers, welding apparatus and as insulation on coils. Because of its versatility and high thermal rating 400F SERIES has also found applications in many consumer appliances, lighting fixtures, stoves, oven and furnace controls, relays, breaker panels, switchgear and other commercial and industrial apparatus.
400F Series is comprised of acrylic resin continuously coated over premium electrical grade braided fiberglass sleeving. 400F Series offers excellent flexibility, cut-through and mechanical abrasion resistance and is rated class 155ºC electrically. Acrylic sleeving is the work-horse of the motor, transformer and lighting industries.
400F Series is compatible with all magnet wire coatings as well as insulating varnishes such as polyesters, epoxies, phenolics and formvar; it is an approved component in most UL insulation systems.
470F Series is manufactured with a clear, modified acrylic resin which offers increased mechanical strength and improved thermal stability.
Availability
Sizes: - 400F SERIES is available in continuous spooled lengths or cut lengths in NEMA sizes #24 THROUGH 1 ¾".
Colors: - Black, White and Natural. Other colors may be available subject to minimum order quantities and/or setup charges.
Brand Names: -
400F SERIES™ is also available as TURBOCRYL™, VOL-CRYL™ and ACRYLIGLAS™.
More Info ...
-
Acrylic Pulls & Knobs
Acrylic pulls & knobs are ready to cement for the ultimate in convenience and appearance. For use on sliding panels or opening swing doors. Available in small, medium, or large in clear, black, or white.
Acrylic Knobs. These true-to-style acrylic knobs bring a contemporary look to your fixtures.
- Product #: 1106504 - Craftics Standard Knob-Clear Acrylic. 1" Top diam. x 1/2" base x 3/4" high.
- Product #: 1106505 - Craftics Large Knob-Clear Acrylic. 1-1/4" Top diam. x 5/8" base x 1-1/8" high.
- Product #: 1106504W - Craftics Standard Knob-White Acrylic. 1" Top diam. x 1/2" base x 3/4" high.
- Product #: 1106504B - Craftics Standard Knob-Black Acrylic. 1" Top diam. x 1/2" base x 3/4" high.
- Product #: 1106505W - Craftics Large Knob-White Acrylic. 1-1/4" Top diam. x 5/8" base x 1-1/8" high.
- Product #: 1106505B - Craftics Large Knob-Black Acrylic. 1-1/4" Top diam. x 5/8" base x 1-1/8" high.
Acrylic Pulls: - These sleek-looking pulls are recessed on the bottom so fingers can slide underneath them for easy pulling.
- Product #: 1107248 - Craftics Small Pull-Clear Acrylic. 3/8" deep x 1-3/4" L.
- Product #: 1107248W - Craftics Small Pull-White Acrylic. 3/8" deep x 1-3/4" L.
- Product #: 1107249 - Craftics Medium Pull-Clear Acrylic. 7/16" deep x 2-3/4" L.
- Product #: 1107249W - Craftics Medium Pull-White Acrylic. 7/16" deep x 2-3/4" L.
More Info ...
-
Impact-Modified Acrylic Sheet R7800
Acrylic Sheet - Impact-Modified Acrylic Sheet - R7800 Sheet with "Routable Masking". R7800 impact-modified acrylic sheets from Professional Plastics offers superior impact-resistance than standard acrylic sheets. The result is longer-life and greater safety in glazing applications where impact is a potential threat. Applications include Golf Cart Windshields, UTV windshields, off-road vehicle windshields, equipment screens, and other transparent glazing needs. Generally, PMMA is very hard material. Hardness is reduced with addition of the modifier as it imparts it's elastomeric structure into the polymer matrix. The impact modifier also slightly reduces transparency in accordance with the percentage of modifier that is added to the base PMMA resin. This modifier also slightly lowers the color value in whiteness and yellowness Index. These transparency and brightness changes are minimal, and meet industry standards for impact-modified acrylic sheet. Please contact contact customer service for samples and pricing. Professional Plastics provides R7800 sheets and cnc fabricated parts to customer specifications.
- Excellent for Protective Shields for COVID 19 virus protection at Pharmacies, and other Retail Checkout Counters
- For Best Protection: Virus protection screens can be attached at both the FRONT AND BACK SIDES of cashiers at grocery stores
- This would offer dual protection from customers in surrounding checkout lines
- Professional Plastics has a massive inventory of these sheets in stock for immediate availability.
More Info ...
-
Laser Viewing Acrylic
Laser Viewing Acrylic is a special filtering grade acrylic is used for optical protection from lasers in various applications including:
- Optical table enclosures
- Lab viewing windows
- Laser viewing boxes
- Workstation viewing ports
More Info ...
-
AC-300 ESd Acrylic Sheet
AC-300™ Acrylic is a plastic sheet product that controls static electricity in many applications, including windows, doors, machine covers and enclosures, and fabricated desiccators and cabinets. It is a premium quality acrylic sheet coated with SciCron Technologies clear, C-300™ static dissipative coating which prevents charge generation on the sheet surfaces. This controls particulate attraction and prevents electrostatic discharge (ESD) events completely independent of humidity. AC-300 Acrylic fabricates simply, is light in weight and is available in large sheet sizes. It has excellent optical properties, chemical resistance, surface hardness and mar resistance.
More Info ...
|