-
![Meldin® 7001 Polyimide (Unfilled)]( "Meldin® 7001 Polyimide (Unfilled)")
Meldin® 7001 Polyimide (Unfilled)
Meldin® 7001 Rods, Plates & Parts offer superior mechanical properties & high chemical resistance. Meldin polyimide is ideal for electrical and thermal insulating applications. More ductile than ceramics, and lighter weight than metals, Meldin® 7001 is an excellent choice for structural parts in aerospace and other applications where metal replacement is desirable. In Semiconductor Wafer Processing applications, the plasma etch rate of Meldin® 7001 is 10% to 20% lower than Vespel® SP-1 providing superior performance over time. (contact us for complete details). For IC Test Sockets & Probe Test Heads, Meldin® 7001 is also an excellent replacement for Vespel® SP-1. Meldin 7000 products feature Continuous Operational Temperatures up to 550ºF (260ºC) and Intermitting Operation up to 900ºF , while holding tight tolerances of ±0.001 in. on both ODs and IDs. Meldin 7001 is suitable for high-temperature structural, high-purity semiconductor, & plasma welding applications.
- Meldin Plates are Compression Molded & Meldin Rods are Isostatically Molded (ISO)
- Meldin DF Parts are Direct Formed. (contact us for custom quotes)
Typical Applications: Wafer Clamp Rings & Screws, IC Test Sockets & Nests, Plasma Torch Tips, Bearings, Seals, Insulators, Thrust Washers,
Semicon Insulator Bushing,
Hot Runner Insulator
- Stocked in Professional Plastics USA, Singapore & Taiwan Warehouses
-
Meldin® 7003 Polyimide (15% MD Filled)
Meldin® 7003 includes 15% molybdenum disulfide lubricating filler for wear applications that operate in a vacuum or in very dry conditions where graphite actually becomes abrasive. Typical applications of Meldin 7003 include seals, bushings, bearings, gears, and other wear surfaces in outer space, ultra-high vacuum or dry gas applications.
- Made in standard 12" x 12" (305mm x 305mm) plates, or 10" x 10" (254mm x 254mm) plates up to 2" (50.8mm).
- Made in Standard 37" (940mm) Long Rods up to 3.25" (82.5mm) diameter.
- Now available in Isostatically Molded Rods, as well as standard Compression-Molded Plates
-
Meldin® 7021 Polyimide (15% Graphite Filled)
MELDIN® 7021, Polyimide with 15% by Weight Graphite Filler (comparable to Vespel SP-21 polyimide).
Our self-lubricating grade, MELDIN® 7021, has 15% by weight graphite fillers, encapsulated by the base polyimide resin. With its low coefficient of friction and high heat resistance, MELDIN® 7021 provides our customers the best all-around choice for high temperature bearings, seals, and other low-wear applications.
Application Profiles:
- Meldin 7021 Aircraft Engine Vane Bushing
Meldin 7021 self-lubricating polyimide materials meet or exceed the most stringent requirements for
aerospace applications. Backed up by third-party independent testing, the Meldin 7021 material grade
provide our customers consistent mechanical and performance properties for aircraft airframe systems
such as landing gear and fuselage components, as well as jet engine parts such as pads, bumpers,
washers, seals, and bearings.
-
Nycast® 12 - Low Moisture Nylon
NYCAST® 12 is specially formulated and designed
to offer:
- Very low moisture absorption
- Superior wear resistance
- Dimensional stability
- Exceptional lubrication ability
- Outstanding mechanical characteristics
- High impact strength
- Lower thermal expansion
-
NylaPro 1000-XL
NylaPro 1000-XL contains a proprietary solid lubricant, which offers a lower Dynamic Coefficient of Friction, and Superior Wear Resistance to all other grades of Type 6 Monomer Cast Nylon. NylaPro 1000-XL is used for Dynamic applications where external lubrication is difficult or impossible. Providing in excess of 5 times longer part life than other lubricated materials, NylaPro 1000-XL offers significant savings in machine maintenance and down time costs. As well, it provides added assurance of part life in friction applications where other Cast Nylons may fail.
Typical Applications:
Wear Strips - Bearings / Bushings - Abrasion Pads - Rollers - Guide Rails - Star Wheels (Bottling Plants) - Valve Seats
- Color: Light Grey
-
Nylapro® PVM - High PV
Nylapro® PVM (pressure/velocity/maximum) was developed to provide a premium material for a variety of applications. Nylapro PVM is a self lubricated material with a low coefficient of friction that can increase the life of equipment. Nylapro® PVM offers exceptional PV (pressure times velocity) values resulting in an excellent material for tough load bearing/frictional applications.
Typical Applications: - Bearings & Bushings
- Provides Superior PV Performance when compared to standard Nylon, Nylon MD or Oil-Filled Nylon
-
Nylatron® LIG - Oil-Filled Nylon
Nylatron® LIG combines the toughness of cast PA6 with an oil-based lubricant that is encapsulated within the nylon matrix. It increases the load bearing performance of the material when compared to unfilled nylons and reduces the coefficient of friction. It is an ideal material for industrial application.
-
Nylatron® 703XL
Nylatron® 703XL is a new internally lubricated cast nylon for special area applications. Zero "stick slip" is its differentiating feature. Units equipped with Nylatron 703XL can accurately display smaller movements made possible by today's sophisticated control devices. Static and dynamic coefficients of friction that approximate each other at virtually every point over the Nylon product's useful range, make this possible.
The wear resistance of NYLATRON NSM with the added benefit of zero æstick-slip' makes NYLATRON 703 XL an ideal material for applications where precise motion control is required.
NYLATRON 703 XL has been prototyped in the Japanese market in Telescopic Crane Booms. NYLATRON 703 XL is the material of choice because of the virtual absence of vibrations during the movement of the boom resulting in more efficient positioning of the crane and safer working standards.
-
Nylatron® GS Nylon - Extruded
Nylatron® GS is a molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. With a lower coefficient of linear thermal expansion than Nylon 101. Nylatron GS is the Extruded Grade, whereas Nylatron GSM is the Cast Grade. For thicker plates and large diameter rods, see Nylatron GSM (cast material)
-
Nylatron® GSM Blue Nylon (MD+Oil)
Nylatron® GSM Blue Nylon
The first cast nylon to combine both molybdenum disulphide (MoS²) (aka MD) and Oil for the load capacity of Nylatron GSM nylon, plus improved frictional characteristics. It excels in higher pressures, and at low speeds-up to 40 fpm. It offers 20% lower coefficient of friction, 50% greater limiting PV, and a lower "k" factor than Nylatron GSM, and the lowest "slip-stick" of any nylon product making it ideal for slide pads, thrust washers and trunion bearings.
- Color: Dark Blue
- Filled with MD + Oil
-
Nylatron® GSM Nylon
Nylatron GSM cast nylon from MCAM-Quadrant contains finely divided particles of molybdenum disulphide (MoS2) to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. This material may be cast in standard sizes and near-net shapes. Massive Plates, Rods & Tubes are avilable upon request.
-
Nylatron® NSM
Nylatron® NSM Nylon is the best bearing and wear nylon product available today. This proprietary type 6 Nylon formulation is produced using MCAM-Quadrant's Monocast® process. Solid lubricant additives impart self-lubricating, high pressure/velocity and superior wear resistance characteristics. Nylatron NSM was developed specifically for demanding applications where larger size parts are required. It is ideal for bearings, gears and wear pads.
- In wear applications, Nylatron NSM lasts up to 10 times longer than standard Type 6 nylon
-
Nylatron® WP
Nylatron® - Developed specifically for wear pads, Nylatron® WP outperforms its competition across a wide range of applications and in multiple industries. Nylatron WP offers an economical solution to provide superior performance, weight and noise reduction, corrosion resistance, and easy machining. This self-lubricating Nylon reduces maintenance and the associated downtime and cost. Nylatron® WP truly outlasts them all.
-
Nylon - EXTRUDED, Nylon 6/6 UNFILLED
Nylon Sheet & Nylon Rod - Extruded, Unfilled Nylon 6/6
The exceptional bearing and wear properties of Nylon® make it one of the most widely used plastics in the world. Nylon® is frequently used as a replacement for bronze, brass, aluminum, steel and other metals, as well as other plastics, wood, and rubber. Professional Plastics offers Nylon Sheets, Rods, Tubes, Tubing & Profiles in dozens of formulations.
- For Thicker Plates and Large Diameter Rods & Tube, see Cast Nylon Products
-
Nylon 6/6 Tubular Bar (1" ID and above)
Nylon 6/6 Tubular Bar - Extruded, Unfilled - (1" ID and above)
The exceptional bearing and wear properties of Nylon make it one of the most widely used plastics in the world. Nylon is frequently used as a replacement for bronze, brass, aluminum, steel and other metals, as well as other plastics, wood, and rubber.
-
Nylon MD + Oil - Blue (Generic)
Nylon MD-OIL Blue (Generic)
- Standard Color: DARK NAVY BLUE
- NOTE: Other colors may also be available
This provides a material possessing the same high Compressive Strength and Load Bearing properties of MD filled, with all the advantages of a Liquid Lubricant. Nylon MD + OIL (Blue) is especially suited for High Load - Low RPM applications, but is a superior replacement for MD in many heavy-duty friction generating applications.
Typical Applications:
- Pillow Blocks
- Trunnion Bearings
- Rope Sheaves, Pulleys, Sprockets
- Slipper Pads
- Dryer Bushings
- High Load applications
-
![Nylon MD Sheets & Rods - Cast]( "Nylon MD Sheets & Rods - Cast")
Nylon MD Sheets & Rods - Cast
Nylon® MD (Cast 6) is a nylon and molybdenum disulfide (MoS2) composition designed to improve the mechanical, thermal and bearing properties to Type 6 Nylon while maintaining its basic electrical and chemical characteristics. Cast Nylon MD is more cost efficient than extruded Nylon MD when it comes to production of large parts. The casting process allows for massive sheets up to 60" x 120", Rods up to 24" dia, Tubes up to 55" diameter, and even Near-net Shapes for the production of large, "hollowed-out" parts that would otherwise require heavy machining and waste.
Through compounding, finely divided particles impart extra lubricity to this nylon, permitting Nylon MD parts to operate with little or no lubrication. This makes it especially suited to applications where external lubrication is impractical, contaminating or difficult to maintain. The added lubricity also contributes dramatically to component service life, making Nylon MD a very cost-efficient choice. Nylon MD provides non-galling and non-scratching characteristics, sound dampening qualities, insulating properties, resistance to oils, greases, most alkalies, solvents, and organic acids
-
Nylon MD Sheets & Rods - Extruded 6/6
Nylon® MD (extruded type 6/6) is a nylon and molybdenum disulfide (MoS2) composition designed to improve the mechanical, thermal and bearing properties to type 6/6 nylon while maintaining its basic electrical and chemical characteristics.
Through compounding, finely divided particles impart extra lubricity to this nylon, permitting Nylon MD parts to operate with little or no lubrication. This makes it especially suited to applications where external lubrication is impractical, contaminating or difficult to maintain. The added lubricity also contributes dramatically to component service life, making Nylon MD a very cost-efficient choice.
Nylon MD provides non-galling and non-scratching characteristics, sound dampening qualities, insulating properties, resistance to oils, greases, most alkalies, solvents, and organic acids
- For very large and complex shapes, consider Cast Nylon MD (type 6).
-
Nylon MD Tubes - CAST
Nylon® - Cast, MD Filled is a dry lubricant-filled bearing material. Manufactured to be a more crystalline product with improved wear resistance, Nylon® - Cast, MD Filled also offers improved compressive strength. Cast Nylon MD tubes contains finely divided particles of molybdenum disulfide to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves, sprockets and custom parts.
- Cast Nylon MD Tubes are Gray-Black in Color.
-
Nylon®, Oil-Filled - Green (Generic)
Oil-Filled Nylon (green Color): - A special formulation of Liquid Lubricant encapsulated during manufacture, provides for true lubrication at the bearing surface. It is offered for applications where maintenance lubrication is difficult or impossible. Oil-filled Nylon also, limits moisture adsorption, making it an ideal bearing material for submerged or critical tolerance applications.
- Also See Nyloil® Green
- Oil-Filled Nylon is also available in NATURAL-OIL for Food Contact applications. The absence of Pigment (NATURAL COLOR) permits this grade to conform with FDA Regulations 21 CFR, Sec. 177.15 and USDA 3A Sanitary Standards 20-17 for direct contact with food. See Nyloil FG Food Grade
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
