-
Phenolic - Grade C Canvas Sheets
Phenolic Canvas Grade C (machining grade) sheets for structural and mechanical applications. This laminated product utilizes a canvas base and phenolic resin binder. Grade C & CE canvas phenolic are made from a medium weave cotton cloth fabric and mixed with phenolic resins to provide good wear resistance, low moisture absorption, and good mechanical strength at economical cost.
Canvas-based phenolics are used for structural supports, piston rings, gears, spacers, and bearing surfaces.
-
Phenolic - Grade CE Canvas Sheets
CE Canvas Phenolic Sheet (Grade CE Canvas Electrical Grade) Sheets exhibit good mechanical and impact strength with continuous operating temperature of 250°F. This material is an excellent insulator and is used in various electrical and mechanical applications.
- CE stands for Canvas Electrical Grade.
-
Phenolic - Grade L - Linen Sheets
Phenolic - Grade L Linen is a fine weave (less than 4 ounce/square yard) cotton fabric commonly called linen, combined with phenolic resin to provide better machining than NP310. It is used for smaller and more intricate shapes than Grade C Canvas Phenolic. This products is also known Linen Phenolic, and Micarta L.
-
Phenolic - Grade LE Sheets
Phenolic Grade LE Linen Sheets provide good mechanical & electrical strength. Recommended for intricate high strength parts. Continuous operating temperature 250°F
- Electrical Grade Linen Phenolic Sheets & Rods per NEMA LE
-
Phenolic - Grade XX Paper
XX Paper Phenolic is a paper-based high pressure laminate suited for general purpose electrical applications. The material has good mechanical properties and excellent moisture resistance. XX machines well and may be punched cold up to .046" and hot punched up to .093".
XXP Paper Phenolic is better than XX grade in both electrical and moisture-resisting properties. XXP is more suited for hot punching and falls between XP and XX in punching and cold-flow characteristics.
-
Phenolic Rods - Grade CE Canvas
Canvas Phenolic Rods - Grade CE (Canvas Electrical Grade Rods) exhibit good mechanical and impact strength with continuous operating temperature of 250°F.
- CE stands for Canvas Electrical Grade.
-
Phenolic Rods - Grade LE Linen
Linen Phenolic Grade LE (Linen Electrical Grade) provides good mechanical & electrical strength. Recommended for intricate high strength parts. Continuous operating temperature 250°F
- Electrical Grade Linen Phenolic Rods meet per NEMA LE
- Standard LE Phenolic Rods are produced as "Sheet Rod" which is centerless ground from LE Sheets.
- Special Order "Rolled & Molded" Grade is also available with a lead-time (and typically a higher price)
-
Phenolic Tubes - Grade LE Linen
LE Phenolic (Linen Electrical Grade) laminated tubes are typically rolled over a mandrel to produce custom-wall thicknesses.
Linen Phenolic Tubes (Grade LE) provide good mechanical & electrical strength.
- Recommended for intricate high strength parts.
- Continuous operating temperature 250°F
- Electrical grade Linen Phenolic
- Additional Sizes Available Upon Request
-
![PLEXIGLASS Sheet - Acrylic Sheet - EXTRUDED]( "PLEXIGLASS Sheet - Acrylic Sheet - EXTRUDED")
PLEXIGLASS Sheet - Acrylic Sheet - EXTRUDED
Plexiglass Sheet Supplier - Extruded Plexiglass Acrylic Sheets are available in Cut-To-Size Sheets, Full Sheets, or Standard Basic Sizes. Plexiglass sheet is a glazing, signage, sneeze guard, window or display material that is strong, moisture resistant & is more clear than glass. Plexiglass can also be heat-formed without loss of optical clarity. These acrylic sheets are economical, impact-resistant and can be precision-cut to size. If you need plexiglass, call a "Professional". We will cut-to-size & ship sheets of plexiglass directly to your door. Buy plexiglass online or shop for various grades of plexiglass from our website. Plexiglass is a safe and economical replacement for broken glass windows, tabletops and picture frames. Plexiglass is also used for Sneeze Guards, Pharmacy Windows & Protective Shields.
- Note: Do NOT Clean with Windex® - use warm soapy water or Novus 1 Plastic Polish
Not sure which Plexiglass Color to choose ?
- Click to View: 50 Colors & Shades: Gray, Red, Blue, Orange, Yellow, Green, Purple, Pink, White & Bronze.
- Plexiglass images on this page will change when you have selected a Color, Size & Tolerance
- Note: Not all colors are available in all thicknesses. (.125" & .250" are most common for colors)
Translucent, Transparent or Opaque Colored Plexiglass ? - Which do you want ? - See Color Chart
- Translucent Plexiglass = Light & Shadows can be seen through Sheet.
- Transparent Plexiglass = Images can be viewed through sheet (like tinted glass)
- Opaque Plexiglass = Neither light nor images can be seen through the sheet.
"Plexiglass" is often used as a generic term for acrylic sheet. Spelled as Plexiglas® (one S) it's the Arkema brand name. Professional Plastics is a local plexiglass acrylic sheet supplier & fabricator with 22 locations in Fullerton (Los Angeles/Anaheim), San Jose, Sacramento, Buffalo New York, Dallas, Houston, Phoenix, Denver, Seattle, Portland, Atlanta, Cleveland, Utah, Rockford IL, Tampa Florida, Singapore & Taiwan.
-
![Plexiglass Sheet - Acrylic Sheets - CAST]( "Plexiglass Sheet - Acrylic Sheets - CAST")
Plexiglass Sheet - Acrylic Sheets - CAST
CAST Acrylic Sheets -are offered in Clear, Black, White, Grey, Bronze, Blue, Red, Yellow, Green and more. Acrylic applications include: picture frames, store displays, furniture, shelving, windows, barriers, shields, replacement glass and aquariums. Clear Acrylic is optically transparent, unaffected by moisture, and offers a high strength-to-weight ratio, and can be easily heat-formed without loss of optical clarity. Prolonged exposure to moisture, or even total immersion in water, does not significantly effect its' mechanical or optical properties.
Note: This product is currently in high demand for for Pharmacy Windows & Protective Shields for coronavirus testing facilities.
- Countertop Plexiglass Sneeze Guards
Why use CAST Acrylic verses EXTRUDED Acrylic ?
- Continuous Service Temp: 180° F (Cast) vs. 160° F (Extruded)
- Formability Temp: 340° F to 380° F (Cast) vs 290° F to 320° F (Extruded)
- Cast acrylic has a higher molecular weight, therefore it will cut, drill and rout cleaner.
- When machining cast acrylic, shavings will flake off whereas extruded acrylic shavings may gum up on the tool.
- Cast acrylic also offers better glue-joint effectiveness and performs better in laser cutting.
-
Poly 2000 (MIL-P-25690) Stretched Acrylic
Poly 2000 (MIL-P-25690) military specification covering stretched acrylic sheet specially designed from Mil-P-8184 base material. It offers enhanced craze properties and increased crack resistance. Material supplied for conformance to this specification is identified as Poly 2000™.
-
Polycarbonate - Machine Grade Plate - Sheet
Polycarbonate - Machine Grade Plate (thick sheet for engineering grade parts)
Machine-grade polycarbonate is an amorphous thermoplastic material with high-impact strength, high modulus of elasticity, and good dimensional stability. These properties, in addition to good electrical characteristics, make machine grade polycarbonate stock shapes an excellent choice for electrical/electronic applications. Its strength, impact resistance and optical properties also make it an ideal material for certain structural applications that require visual translucency.
-
-
Polycarbonate Rod
Polycarbonate Rod made from machine-grade polycarbonate resin is an amorphous thermoplastic material with high-impact strength, high modulus of elasticity, and good dimensional stability. These properties, in addition to good electrical characteristics, make machine grade polycarbonate rods an excellent choice for electrical/electronic applications. Polycarbonate's strength, impact resistance and transparency also make it an ideal material for certain transparent structural applications.
-
Polycarbonate Sheet - A/R Abrasion Resistant
Polycarbonate AR Sheet including; Makrolon® AR Abrasion-Resistant Polycarbonate Sheet. - Abrasion-Resistant Polycarbonate Sheet offers glasslike surface hardness and the impact strength of polycarbonate. With enhanced UV resistance to protect against yellowing and hazing, AR sheets provide a longer service life for high-profile architectural glazing, and performs extremely well for other flat applications such as view windows and machine guards in harsh chemical environments.
- Makrolon® AR is our preferred brand, but some items sold on this page may vary.
- AR-1 = Abrasion-Resistant on 1 Side
- AR-2 = Abrasion Resistant on 2 Sides
-
Polycarbonate Sheet - GP
Polycarbonate Sheet offers superior durability, unmatched design flexibility and structural integrity that easily surpasses laminated glass and acrylic alternatives. Polycarbonate Sheet GP (Standard General-Purpose Glazing Grade) will transmit 86% of light. This product is UV stabilized, has a heat deflection temperature of 270°F at 264 PSI, and has a smoke density rating less than 75. Polycarbonate glazing sheet is available in solar gray and bronze in thicknesses from .080" to .500". This uncoated polycarbonate sheet is the standard grade for general purpose applications and can be used for economical protection against breakage or intrusion. A better insulator than glass, PC sheet contributes to lower energy costs.
- Impact-Resistant Riot Protection - Will Not Shatter Like Glass
-
Polycarbonate Sheet - Window Grade
Polycarbonate Sheet - Window Grade from Professional Plastics is a high-quality, impact-resistant polycarbonate sheet available in heavy-gauge sizes while retaining optimum optical clarity.
-
Polycarbonate Twin Wall Sheet
Polycarbonate Twin Wall Sheets
Rigid yet lightweight, Twin Wall Polycarbonate sheets provide superior strength, light transmission, flexibility and weather resistance characteristics. Twin Wall Sheets are ideally suited for greenhouses and anywhere where external light is used for internal lighting purposes, due to its light transmission, profile structure, ability to withstand extreme temperatures and long service life.
- Also available in Triple Wall, 5 Wall & 7 Wall Sheets.
-
Polypropylene (Copolymer) Simona®
Simona® Copolymer PP - Copolymer Polypropylene Sheets & Rods are available from Professional Plastics.
Copolymer PP sheets have a high impact resistance even at low temperatures. They are easy to fabricate, weld or machine. With the polypropylene backed type we offer a solution for lining constructions with excellent welding properties.
-
Polypropylene (Homopolymer) - Simona®
Polypropylene (Homopolymer) Sheet & Rods - Simona® PP-H
Homopolymer Polypropylene sheets are permanent heat resistant and offer an excellent chemical and corrosion resistance. They are easily to fabricate, weld or machine. With the polyester backed type we offer an excellent backing combination for lining and composite construction.
Application Areas:
- Semiconductor processing equipment & Wet Benches
- Machined and fabricated parts
- Laboratory equipment
- Food grade applications
- Prosthetics
- Etching and plating tanks, Acid Tanks
- Ducts, fume hoods and other protective equipment
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
