-
Pro-Mirror™ Aircraft Mirror
Pro-Mirror™ Aircraft Grade Polycarbonate Mirror
Professional Plastics, the leading supplier to the transportation industry, is introducing our Pro-Mirror™. Pro-Mirror is a FAA Flammability, FAR 25.853 articles (a) & (b), certified product that is light weight, impact resistant and flame retardant. Professional applies a proprietary coating to our product giving you the Security and Longevity you have been searching for. Pro-Mirror has industry leading reflectivity and lack of distortion throughout the entirety of the substrate. This product has outstanding abrasion resistance preventing from easy denting or scratching like similar products. Professional Plastics' Pro-Mirror is the industry leader for minimal inclusions, defects and rejections. Pro-Mirror is available in full 48" X 96" sheets, as well as cut and routed to size per request.
-
![ProLens® Aircraft Grade Polycarbonate]( "ProLens® Aircraft Grade Polycarbonate")
ProLens® Aircraft Grade Polycarbonate
ProLens® Aircraft Grade Polycarbonate Sheet - Window Dust Cover Material (for Window Liners)
Professional Plastics, Inc, as the leading supplier to the transportation industry, is introducing our ProLens® Pro-Mirror is a FAA Flammability, FAR 25.853 articles (a) & (b), certified product that is light weight, impact resistant and flame retardant. Professional applies a proprietary coating to our product giving you the Security and Longevity you have been searching for. ProLens® has outstanding abrasion resistance preventing from easy denting or scratching that are typical with competing products. Professional Plastics' ProLens offer the fewest inclusions and defects, thus significantly reduction rejections. Our superior glass-like clarity and reflective qualities are second to none, there is no comparison. ProLens is available in full 48" x 96" sheets, as well as, cut and routed to size per request.
- ProLens® is a registered trade name of Professional Plastics, Inc. - all rights reserved.
-
ProtoPEEK KD2000-IM Tubes
ProtoPEEK KD2000-IM (proprietary PEEK polyetheretherketone) tubes are made via a custom two-stage process to provide complex geometries, fast cycle times, and economical production of high-volume parts.
Sizes:
ProtoPEEK KD2000-IM tubes can be manufactured in sizes up to 5.25" OD. Inside Diameters range from 1.00" ID to 3.75" ID: in .250" increments. Wall sizes from .250" up to .750". Lengths are standard 6" long.
ProtoPEEK KD2000-IM is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. It can be used continuously to 480 F (250 C) and in hot water or steam without permanent loss in physical properties. For hostile environments, Our KD2000-IM is a high strength alternative to fluoropolymers. It carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.
- Available in both Virgin & Glass-Filled Grades
-
ProtoPEEK® 5025 Bearing Grade PEEK
ProtoPEEK® 5025 is a proprietary, bearing grade PEEK (polyetheretherketone) material, reinforced with carbon fibers and internally lubricated with different proprietary lubricants to improve dry running capabilities. Tribological evaluations under dry running conditions have shown its friction coefficient and wear rate to be much lower than other bearing grade composite materials available in the market. Its extremely low wear rate along with low coefficient of thermal expansion properties make this material an ideal candidate for replacing metal wear components.
-
PTFE - 25% Glass-Filled
PTFE Glass-Filled - Milled glass fibers have the least effect on chemical and electrical properties and add greatly to the mechanical properties of unfilled PTFE. Addition of glass improves compressive properties by as much as 40% and improves wear resistance greatly. These compounds resist acids and oxidation but can be attacked by alkali.
PTFE with 25% glass fibers for increased stability is supplied in sheets, rods & tubes.
- Available in Standard 25% Glass Filler.
- Also available in 15%, 20%, and other custom blends.
- Glass-Filled PTFE has a Typical 2-3 Week Lead-Time.
- If faster delivery is required, please contact customer service
-
PTFE - Colors (all) Sheets, Rods, Tubes
PTFE - Colors (all) Sheets, Rods, Tubes in Black, Blue, Red, Purple, Green & Other Colors. Virgin and Mechanical Grade Colored PTFE Flouorpolymer Shapes are available from Professional Plastics.
PTFE it is a fluorocarbon-based polymer that exhibits astonishing chemical resistance and ultra high-purity. Self-lubricating and with a low friction coefficient, PTFE (polytetrafluoroethylene) sheets and rods are ideally suited for the manufacture of high-temperature seals, insulators and bearings used in semiconductor, aerospace & chemical processing industries.
PTFE's mechanical properties are low compared to other plastics, and can be used over a wide temperature range of -100°F to +400°F (-73°C to 204°C). ). It has excellent thermal and electrical insulation properties and a low coefficient of friction. PTFE is very dense and cannot be processed by melting. PTFE must be compressed and sintered to form useful shapes.
-
PTFE - Graphite Filled PTFE
Graphite-filled PTFE has exceptional chemical resistance and is compatible with most hydraulic fluids.
Outstanding performance when used for hydraulic/pneumatic compression type rod and piston seals, bearing bands and rotary applications.
-
PTFE Balls
PTFE Balls (Polytetrafluorethylene) Balls. - PTFE is a non-friction material which is resistant to most corrosive agents and is electrically nonconductive. PTFE is particularly suitable for use in apparatus designed to handle cryogenic liquids and acids. Commonly used in ball seal valves.
-
PTFE Film (.002 to .025 thick)
PTFE (PolyTetraFluoroEthylene), it is a fluorocarbon-based polymer that exhibits astonishing chemical resistance and ultra high-purity. Self-lubricating and with a low friction coefficient, PTFE is suited for the manufacture of high-temperature seals, insulators and bearings used in semiconductor, aerospace & chemical processing industries. PTFE's mechanical properties are low compared to other plastics, and can be used over a wide temperature range of -100°F to +400°F (-73°C to 204°C). Mechanical properties are often enhanced by adding fillers. It has excellent thermal and electrical insulation properties and a low coefficient of friction. PTFE is very dense and cannot be processed by melting. PTFE must be compressed and sintered to form useful shapes.
-
![PTFE Sheet & Rod (Virgin Grade)]( "PTFE Sheet & Rod (Virgin Grade)")
PTFE Sheet & Rod (Virgin Grade)
PTFE is a fluoropolymer that exhibits astonishing chemical resistance and ultra high-purity. Self-lubricating and with a low friction coefficient, PTFE sheets and rods are ideally suited for the manufacture of high-temperature seals, insulators and bearings used in semiconductor, aerospace & chemical processing industries. PTFE's low coefficient of friction makes it suitable for applications where sliding action of parts is needed: such as plain bearings, gears, and slide plates. In these applications, it performs significantly better than nylon and acetal; and is comparable to UHMW. PTFE however can be used over a far wider temperature range than these materials; -100°F to +400°F (-73°C to 204°C) and offers superior electrical insulation properties. Although its' mechanical properties are low compared to other engineering plastics, those properties can be enhanced through the use of additives such as Carbon, Graphite, Bronze, and Glass Fiber. The most commonly known brand name of PTFE-based formulas is Teflon® by Chemours
-
![PTFE Sheets & Rods (Mechanical Grade)]( "PTFE Sheets & Rods (Mechanical Grade)")
PTFE Sheets & Rods (Mechanical Grade)
PTFE Sheets & Rods exhibit astonishing chemical resistance. PTFE is a self-lubricating material that provides a low friction coefficient, and is ideally suited for the manufacture of corrosion-resistant gaskets & seals. Several other manufacturers make their own brands of PTFE which can often be used as substitute material. We offers various brands of PTFE, but mechanical grade PTFE (as sold here) is a reprocessed grade that may contain a variety of brands in the overall blend. The mechanical properties and purity of Mechanical Grade PTFE may also be lower than Virgin Grade PTFE. Mechanical Grade PTFE is supplied without warrantee or any gaurantees regarding minimal properties. Customers requiring material certifications and traceabilty should consider VIRGIN PTFE made from Dyneon or Daiken resins, or Chemours® PTFE specialty grades such as Chemours® 7A, Chemours® 7C, Chemours® 8A or Chemours® 9B - Chemours® PTFE specialty grades are available as a custom order only and are priced higher than Generic Virgin PTFE Shapes - Lead-Time Will Apply.
- Chemours® PTFE is a registered trademark of Chemours
-
![PTFE Shrink Tubing (2:1 & 4:1)]( "PTFE Shrink Tubing (2:1 & 4:1)")
PTFE Shrink Tubing (2:1 & 4:1)
PTFE heat shrink tubing (PTFE) is available in 2:1 and 4:1 shrink ratios, and is widely used in military applications (MIL-I-23053/12) because of its high continuous use temperature (250°C), and outstanding chemical resistance.
- PTFE heat shrink tubing is the most difficult of the three fluoropolymer materials to shrink due to its extremely high shrinking temperature (325-340°C). You can use a heat gun or welding torch to shrink PTFE, but these methods have a tendency to cause the material to overheat in small areas, while under-heating other areas, causing uneven shrinking and potential burning of the material. The most reliable method for shrinking PTFE Teflon is the use of a controlled temperature oven; however this is impractical with large harnesses or temperature sensitive components.
- PTFE heat shrink tubing is available in a 2:1 shrink ratio and 4:1. The 2:1 is available in up to four different wall thicknesses. Please note: when ordering our 2:1 PTFE Heat shrink, ORDER AS SIZE AFTER SHRINKING.
-
PTFE Tubes & Rings - Molded
PTFE is renowned for its temperature resistance and slick, non-stick qualities. As an industrial material, PTFE has exceptional chemical resistance, high and low temperature durability, low coefficient of friction and superb insulating qualities. It lacks toughness for abrasive applications, however, and is not readily fastened together using adhesives unless the surface is "etched" to accept the bonding agent. PTFE properties can be improved with the addition of fillers such as glass fiber and carbon.
- PTFE Tubes sold on this page are compression-molded as ordered.
- Typical Lead-Time is 10-14 Business Days. Faster Delivery Upon Request.
-
PTFE Tubing - Extruded AWG Sizes
PTFE Tubing in AWG Sizes - PTFE Tubing provides the ultimate in lubricity, high temperature use, chemical resistance, biocompatibility, and precision extruded tolerances.
- AWG Sized PTFE Tubing is sold in Standard 250 ft, 500 ft & 1000 ft Spools.
- AWG Sizes are available in LW (Light Wall, TW (Thin Wall), SW (Standard Wall), and HW (Heavy Wall) - see Size List for details
- Flexible PTFE Tubing is available in both AWG Sizes or
Fractional Sizes
- Professional Plastics also offers Large Molded PTFE Tubes & Rings.
-
-
-
PVC - Hollow Bar - Tubular Bar Stock
PVC - Hollow Bar - Tubular PVC Bar Stock - Dark Gray
Substituting hollow bar for solid round can result in considerable savings where parts are bored. Only an internal finish cut is required, as close tolerances on OD dimensions are maintained.
PVC is the most widely used member of the vinyl family. Common applications include chemical processing tanks, valves, fittings & piping systems. PVC Sheets, Rods & Tubes offer excellent corrosion and weather resistance. It has a high strength-to-weight ratio and is a good electrical and thermal insulator. PVC is also self-extinguishing per UL flammability tests. PVC may be used to temperatures of 140°F (60°C). Available in sheets, rods, and tubing.
- For Higher Temperature Performance, consider CPVC.
-
PVC Angle
PVC angle provides a reliable means for joining PVC sheets to provide corrosion resistant tanks, cabinets, and other items. Joining is accomplished by the solvent cementing process or hot air welding methods.
- PVC Angle is available in Grey, White & Clear.
- Also see CPVC Angle for higher temperature ratings.
All PVC stock machining shapes shall be manufactured from a rigid, unfilled, general-purpose-grade Polyvinyl Chloride (PVC) compound with a Cell Classification of 12454, per ASTM D1784. (Callout Designation S-PVC0111 per ASTM D6263).
-
PVC Films - Rigid and Flex Vinyl Film
Professional Plastics offers high quality Rigid and Flexible PVC Vinyl Films in both clear and colors. These materials are commonly used in stationery, office products, media storage and packaging applications. These PVC Vinyl Films offer excellent clarity, printability, and formability. A variety of colors, and finishes are available in gauges from .003" to .125".
Rigid Vinyl Films (Rigid PVC Films) are available in the following types:
- .005" - .030" Clear Roller Polished
- .010" - .030" Gloss White Opaque
- .010" - .030" Matte White Opaque
- .010" - .125" Planished: P/P (Polished/Polished), P/M (Polished/Matte), M/M (Matte/Matte)
- Clear, Opaque, Transluscent & Transparent Colors
Flexible Vinyl Films (Flexible PVC Films) are available in the following types:
- .004" - .040" All Types
- Note: Items Sold on this page might be in Limited Supply - You will be contacted if we are unable to complete your order as placed.
-
PVC Pipe - Clear
Clear PVC Pipes - Clear Rigid PVC piping provides a versatile, cost-effective alternative for many piping applications, particularly those where visual monitoring of processes is critical.
The benefits of rigid PVC piping are well recognized: exceptional corrosion resistance; smooth interior walls for unimpeded flow and reduced sediment buildup; non-contaminating for purity applications; fast, reliable solvent-welded connections; good pressure-bearing capability; and ease of handling and installation, to name a few.
All of these important benefits are now available in a unique product with optimum clarity. This clarity provides the all-round visibility that specialized applications demand — whether it be clean room applications, sight glass, dual-containment or various other processing applications where continuous monitoring is necessary.
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
