-
Susta PPO MG (Noryl®)
Susta PPO MG (Noryl®) - SustaPPO is excellent for medical device applications due to its machineability, excellent impact properties and resistance to repeated autoclaving cycles.
Sizes:
- Sheets 3/8" - 2 x 24"x 48"
- Rods 3/8" - 6" diameter
- Colors available: Grey, Blue, Brown, Yellow & Green
More Info ...
-
TPX® (PMP) Engineering Plastic
TPX (Polymethylepentene) is a lightweight, high temperature polyolefin with exceptional acoustical and electrical properties. TPX has low moisture absorption and excellent chemical resistance. It is often used for applications requiring low distortion of sound waves including sonar covers, speaker ones, and ultrasonic transducer heads. TPX is also used for electrical insulating applications requiring high dielectric strength and low dielectric constant.
TPX (PMP - PolyMethylPentene) is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equipment, laboratory ware, small appliances, ovenware, baking cartons, release paper, wire and cable coating, and a number of industrial uses.
- TPX® is a trade name of Mitsui Plastics Inc.TPX (Polymethylepentene) is a lightweight, high temperature polyolefin with exceptional acoustical and electrical properties. TPX has low moisture absorption and excellent chemical resistance. It is often used for applications requiring low distortion of sound waves including sonar covers, speaker ones, and ultrasonic transducer heads. TPX is also used for electrical insulating applications requiring high dielectric strength and low dielectric constant.
TPX (PMP - PolyMethylPentene) is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equipment, laboratory ware, small appliances, ovenware, baking cartons, release paper, wire and cable coating, and a number of industrial uses.
- TPX® is a trade name of Mitsui Plastics Inc.TPX (Polymethylepentene) is a lightweight, high temperature polyolefin with exceptional acoustical and electrical properties. TPX has low moisture absorption and excellent chemical resistance. It is often used for applications requiring low distortion of sound waves including sonar covers, speaker ones, and ultrasonic transducer heads. TPX is also used for electrical insulating applications requiring high dielectric strength and low dielectric constant.
TPX (PMP - PolyMethylPentene) is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equipment, laboratory ware, small appliances, ovenware, baking cartons, release paper, wire and cable coating, and a number of industrial uses.
- TPX® is a trade name of Mitsui Plastics Inc.TPX (Polymethylepentene) is a lightweight, high temperature polyolefin with exceptional acoustical and electrical properties. TPX has low moisture absorption and excellent chemical resistance. It is often used for applications requiring low distortion of sound waves including sonar covers, speaker ones, and ultrasonic transducer heads. TPX is also used for electrical insulating applications requiring high dielectric strength and low dielectric constant.
TPX (PMP - PolyMethylPentene) is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equipment, laboratory ware, small appliances, ovenware, baking cartons, release paper, wire and cable coating, and a number of industrial uses.
- TPX® is a trade name of Mitsui Plastics Inc.
More Info ...
-
Tygon® ND 100-80 Tubing
Tygon® ND 100-80 Tubing (replaces Tygon S-54-HL), one of the medical industry's first non-DEHP tubing offerings, has been specifically formulated in a higher durometer that makes it possible to produce smaller diameter tubings with a high resistance to kinking and collapse.
Characteristics:
Tygon® ND 100-80 is available in five extremely small sizes for use in catheters, intravenous
or intra-arterial infusion, and other surgical and hospital applications. It is rigid enough for easy
handling, yet soft enough to reduce problems with puncturing. Since Tygon® ND 100-80 is thermoplastic in nature, it can be fabricated into cannulas or protective sheath products using thermoforming and flaring techniques. Based upon a unique chemistry developed by Saint-Gobain, Tygon® ND Series tubing was
formulated to be Registration, Evaluation, Authorization and restriction of CHemical substances
(REACH) compliant for DEHP. To ensure compliance, every individual compound lot is tested to ensure
DEHP levels are <1000 ppm. During the extrusion process, individual product dimensions are
maintained and monitored through in-line micrometers and off-line verification with computerized
imaging equipment. Consistent with many medical tubing requirements, ND 100-80 material can be effectively bonded/welded using the following methods: heat, electronic (RF)/ultrasonic, solvent and adhesive. Factors
to be considered when selecting the components include: security of the bond required, effect on
the integrity of the materials to be joined, and presence of residues or extractables that may affect
biocompatibility. When bonding procedures are not used, mechanical clamps are recommended to
provide secure attachment.
Biocompatibility
Tygon® ND 100-80 is made from a biocompatible non-DEHP polymer material developed
specifically for medical device needs. The product is USP Class VI approved and REACH compliant.
More Info ...
-
-
Zotefoams - Plastazote® Foams
Zotefoams Product Range: The unique nitrogen expansion process results in a range of foams produced from a wide range of polymers, including LDPE, HDPE PP, EVA copolymers and the recently introduced metallocene catalyst based foams.
Plastazote® Foam (LD45)-
Plastazote® is a closed cell cross-linked polyethylene foam with a density of 45 Kg/M3. A wide range of polymer combinations give increased stiffness, improved temperature resistance and improved moldability. Application areas include packaging, protective padding contact sports, automotive applications, health care and for construction.
Plastazote® Foam (LD 15)- Plastazote LD15 Low Density Polyethylene Foam with a density of 15 Kg/M3. Plastazote is a closed cell, cross-linked polyethylene foam manufactured using Zotefoams unique production process. Plastazote foam LD15 which is available in sheet form and is fabricated by modern techniques and can be thermoformed into shapes.
Plastazote® is acknowledged as the most cited thermoplastic foam material in medical literature. The material is used extensively in a wide variety of medical and health care applications, many of which involve direct skin contact. These outstanding properties stem from the unique manufacturing process technology, which produces a pure, chemically inert foam without blowing agent residues and with a uniform cell structure with regular cell walls.
Latex-free, non-toxic and hypoallergenic, the use of Plastazote foams helps reduce skin irritation. Plastazote foams are typified by their highly consistent cell structure. Because they are expanded in a free environment (without the use of a mold) they also have little in-built stress and little tendency to distort during conversion; both features that make them easy to process and fabricate.
Plastazote foams can be routed cleanly to produce the most complex of shapes. Being cross-linked they are equally suitable for thermoforming, either by compression or vacuum molding. They can be split, sawn, water jet cut, die-cut, butt-welded and heat laminated together to form thicker blocks.
More Info ...
-
ABS Sheet - GP Forming Grade
ABS Sheet (General Purpose ABS Plastic Sheets - thermoforming grade) is offered by Professional Plastics in a wide range colors & grades. ABS Sheets are produced in monolayer and co-extruded multilayer. Stocked in Standard Black and White with Hair Cell Finish on 1 Side. Custom colors also available. Custom formulations can be combined to provide performance an cost saving options such as Virgin Cap + Utility Base, Low Gloss (matte) Cap + Utility Base, and Custom Color Cap + Utility Base.
- Standard ABS Sheet Finish is Hair Cell 1 Side (Textured 1 Side, Smooth 1 Side)
- GP Forming Grade ABS Sheet is Durable and Easily Vacuum-Formed
More Info ...
-
ABS Sheets & Rods - Machine Grade
ABS Sheets & Rods - Machine Grade ABS Sheets & Rods. ABS has perhaps the best balance of properties when cost is a factor. It has good chemical & stress-resistance, as well as, a combination of toughness with rigidity & creep resistance. Machine Grade ABS is easily machined via standard machining techniques including; turning, drilling, milling, and sawing. For heat-bending and thermoformed parts, use ABS Forming Grade.
Engineering Grade ABS is available in Rods & Sheets to customer specifications:
ABS Rods are produced up to 6" diameter in standard 8 foot lengths (Prices Listed Per Foot).
ABS Sheets / Plates are available in two types - Compression-Molded or Extruded:
- Compression Molded Sheets are available up to 4" thick in 48" x 96"
- Standard Thickness Tolerance of Compression-Molded Sheets is +/-10%.
- PLUS ONLY Compression-Molded Sheets are available upon request at an additional cost.
- Extruded Sheets are produced up to 24" x 48", and are sold upon special request only.
- Note: Extruded Sheets have a better thickness tolerance than molded sheets. (also more expensive)
More Info ...
-
AC-300 ESd Acrylic Sheet
AC-300™ Acrylic is a plastic sheet product that controls static electricity in many applications, including windows, doors, machine covers and enclosures, and fabricated desiccators and cabinets. It is a premium quality acrylic sheet coated with SciCron Technologies clear, C-300™ static dissipative coating which prevents charge generation on the sheet surfaces. This controls particulate attraction and prevents electrostatic discharge (ESD) events completely independent of humidity. AC-300 Acrylic fabricates simply, is light in weight and is available in large sheet sizes. It has excellent optical properties, chemical resistance, surface hardness and mar resistance.
More Info ...
-
Acetal Sheets & Acetal Rods (Copolymer)
Acetal Sheets and Acetal Rods (aka POM) acetal copolymer plastic sheets and acetal rods provide high strength and stiffness coupled with enhanced dimensional stability and ease of machining. Acetal Rods and Acetal Sheets are also characterized by a low coefficient of friction and good wear properties especially in wet environments. Because of its high strength, modulus, and resistance to impact and fatigue, Acetal is used as a weight-saving metal replacement. Acetal copolymer overcomes the common problem of centerline porosity in large shapes of Acetal Homopolymer (aka Delrin)
- Acetal Copolymer is preferred to Delrin® in high-pressure applications where centerline porosity is a concern.
- Acetal Copolymer is produced under several brand names including Celcon®, Ultraform® & Acetron®.
More Info ...
-
Acetron® GP Acetal
Acetron GP is MCAM-Quadrant EPP's general purpose acetal and is the only porosity-free acetal product available today. Investments in process technology by MCAM-Quadrant EPP now provide the performance and machinability of acetal without center core porosity. Our in-line photometric quality procedure assures every Acetron GP plate and rod is porosity-free as measured by MCAM-Quadrant EPP's quick check dye penetrant test. For details of test methods, contact MCAM-Quadrant EPP. Acetron GP natural is FDA, USDA, NSF, Canada AG and 3A-Dairy compliant.
More Info ...
-
Aclar ® PCTFE Film
Aclar® flexible PCTFE film provides unsurpassed moisture barrier properties for health care and industrial applications.
- Preferred by pharmaceutical companies for blister packaging and other health care packaging
More Info ...
-
Acrylic Mirror - Plexiglass Mirror
Plexiglass Mirror - Acrylic Mirror is available in standard .118" (1/8"), and .220" (1/4") thicknesses, as well as, .236" (1/4") thickness as a special order gauge.
- Please contact customer service for more size and color combinations.
- Available in FULL SHEETS or CUT-TO-SIZE in Clear or Colors
- Clear Mirror = Standard Non-Tinted Mirror (aka "silver mirror" - "standard mirror")
Colored acrylic mirror is an excellent way to make a statement about yourself or your company. These colors can be saw cut to size or laser cut in custom shapes and sizes. All of our colors are continuously manufactured substrate with a non-delamination guarantee. Acrylic mirror is available in reduced glare, scratch resistant, adhesive back and custom masking on front and back (contact us for special requests).
Applications for plexiglass mirror: - Ceiling tiles, lavatory mirrors, observation mirrors, fitness center mirrors, sunglass racks, jewelry cases, signage, cosmetic displays, end-cap displays, auto backup mirrors, interior trim & accessories. Security mirrors, children's toys, interactive learning toys, crib mirrors.
NOT Recommended for Large Installations - Acrylic is not as rigid as glass, therefore, large mirrored acrylic sheets will tend to bow & create distorted "fun-house" like images unless mounted in rigid frame or flat, rigid backing.
More Info ...
-
Acrylic Rods - Cast Plexiglass Rod - CLEAR
Plexiglass Cast acrylic rods offer excellent clarify & machining characteristics when compared to extruded rods. This material offers good chemical-resistance & is FDA approved for food contact.
Acrylic offers high light transmittance and can be easily heat-formed without loss of optical clarity. Prolonged exposure to moisture, or even total immersion in water, does not significantly effect the mechanical or optical properties of this outstanding economical and multi-purpose material.
- Standard Cast Plexiglass Full-Length Rods are 8 Foot Long
More Info ...
-
Acrylic Rods - Extruded Plexiglass Rod
Plexiglass Extruded Acrylic Rods are available from Professional Plastics in standard 6 foot lengths (full cases only). These economical plexiglass acrylic rods are excellent for use in POP Displays and other decorative items. They are normally supplied in a paper sleeve to protect during handling, but keep in mind that extruded acrylic rods do not have the optical clarity or machining characteristics of cast acrylic rod. In larger diameter rods (.875" dia and above) these high-quality extruded rods are commonly used as grab bars in showers, tubs and spas. Acrylic is moisture resistant, non-toxic and meets standard building codes for use in these applications.
- Extruded Plexiglass Acrylic Rods are NOT for Machining.
- For Machinable, Acrylic Rods, use CAST Acrylic Rods (sold by the foot)
More Info ...
-
Acrylic Tubes - Cast
Cast Acrylic Tubing is highly regarded for its optical clarity and outstanding light transmission properties. These Cast Acrylic Tubes are used in many applications in place of extruded or molded Acrylic because of better machining properties, greater clarity, better resistance to heat distortion and higher tensile strength.
More Info ...
-
Acrylite® EndLighten - Edge Lit Sheet
ACRYLITE® EndLighten acrylic sheet is designed to perform uniform illumination and neutral color presentation throughout the sheet. ACRYLITE EndLighten sheet conceals light sources such as LED lighting inside the frame even in ultra slim applications while producing extremely bright signage. Applications include thin profile signage and poster panels for airports, malls, gyms, restaurants, bus stops, mass transit and outdoor applications.
- Also known as Plexiglas® EndLighten
- Grades include Acrylite EndLighten L, EnfLighten XL, and Endlighten XXL
- ONLY SOLD IN HALF PALLETS - CALL FOR PRICE QUOTE
More Info ...
-
Acrylite® FF Sheet
ACRYLITE® Premium FF ACRYLITE® acrylic sheet from Roehm America LLC is the highest quality continuously manufactured sheet on the market today. Using a proprietary, innovative process, ACRYLITE® FF sheet products are economical, provide tight thickness tolerance, high optical characteristics and low stress levels. ACRYLITE® FF sheet is readily available in a variety of standard sizes and thicknesses, in colors and colorless. Semi-finished polymethyl methacrylate (PMMA) products from POLYVANTIS are sold on the European, Asian, African and Australian continents under the registered trademark PLEXIGLAS®, in the Americas under the registered trademark ACRYLITE®, both owned by Rohm GmbH, Darmstadt, or its affiliates.
More Info ...
-
Acrylite® GP P95 Patterned Sheet
Acrylite® GP P95 (aka Acrylic P95) is patterned on one side of the sheet. This added texture provides decorative effects and diffuses annoying surface reflections. The matte finish is available on one side only. Professional Plastics preferred brand is Acrylite® P95. ACRYLITE GP P-95 sheet offers transparent clarity when in direct contact with objects. Ideal for signs and displays, its one-sided matte finish reduces reflected light. This cell cast sheet comes in colorless, translucent, and custom colors. This products is also available in "Black/White" Acrylite GP P-95 which appears dark by day and, with a little backlighting, it glows white at night. This GP P-95 is manufactured from a special pigment formulation that yields 10-19% light transmittance when backlit, but appears dark and opaque without backlighting.
More Info ...
-
ACRYLITE® SATIN ICE
ACRYLITE® SATINICE (aka Satin Ice) optimum light diffusing acrylic products take advantage of special particles that diffuse light passing through the sheet. These particles, distributed throughout the material, work to eliminate hot spots. Light will be diffused and transmitted differently depending on the grade. The right balance between light diffusion and transmission can soften the light in a room and enhance any environment.
- ACRYLITE® SATIN ICE:
- Thicknesses: - .060", .080", .098", .118", .177", .236", .354", .472"
- Sizes: - 49" X 97"
- Colors: - Frosted, White, Dark Blue, Medium Blue, Glass Green
More Info ...
-
AdvantaFlex® TPE Biopharma Tubing
AdvantaFlex® TPE Biopharmaceutical Tubing - This highly engineered formulation of high purity tubing has been developed for fluid transfer in
the biopharmaceutical industry. This product is made in 16 standard sizes from .125" ID to 1.00" OD.
AdvantaFlex addresses the need for a flexible, translucent, sterilizable, heat sealable, and weldable biopharmaceutical tubing for fluid processing.
AdvantaFlex is ideal for aseptic tubing welds, as it eliminates costly aseptic connectors and multiple contact surfaces. The tubing is made from FDA-approved ingredients and meets various ISO and USP standards, including Class VI, as well as European Pharmacopoeia 3.2.2.1 standards
More Info ...
|