-
Arboron® Phenolic Laminate
Arboron® is melamine-faced solid phenolic laminate impregnated with thermosetting resins. It is consolidated under high pressure and temperature into dense, uniform sheets with good electrical and mechanical properties. Arboron® complies with NEMA thickness and flatness standards and is listed by Underwriters Laboratories Inc.® under Card # E96516 (M), dated December 30, 1992.
- Standard Color: Black Matte
- Replacement for Benelex
-
![Balls - Hollow Plastic PP & HDPE]( "Balls - Hollow Plastic PP & HDPE")
Balls - Hollow Plastic PP & HDPE
Hollow Plastic Balls are spheres that can float on surface of liquid in open tank and thereby greatly reduce the exposed liquid surface area - up to 90%. Dramatically diminish objectionable fumes and odors. Blanket of spheres also insulates heated liquid reducing evaporation and heat requirements. Ideal for plating tanks and similar open tank installations where the liquid surface can be covered with a blanket of spheres without impeding access to the tank for process purposes. Spheres are hollow and will float on any liquid. No welt or rim on which chemicals can deposit, and being smooth they ensure a much tighter surface cover.
Types of Hollow Plastic Balls available from Professional Plastics:
- Polypropylene (PP) is non-toxic and able to withstand continuous working temperatures of 110° C (230°F) Polypropylene is suitable for use in most known chemicals.
- High Density Polyethylene (HDPE) generally suitable as above but with a continuous working temperature limitation of 80° C. (176° F) softening point about 110° C (230°F). High density polyethylene has better chemical resistance to certain compounds like oil, and other hydro-carbons. Also less stress cracking at low temperatures than polypropylene. Color white translucent except 100 mm, black for outside use. All sizes are blow molded.
-
![Beryllium Copper Alloy 25]( "Beryllium Copper Alloy 25")
Beryllium Copper Alloy 25
Beryllium Copper 25 is a Copper base alloy with the capability of being strengthened by
precipitation heat treatment. The alloy furnishes the best combination of electrical
conductivity, corrosion resistance and mechanical strength necessary for numerous
electronic and electro-mechanical devices.
Beryllium Copper 25 alloy is quite satisfactory for fabrication with good formability and joining
characteristics. Forming is readily accomplished from the annealed temper. Severe
bending will be less successful from hard or heat treated tempers and requires large fold
radius ratios.
Beryllium Copper 25 is able to be soldered, brazed, and welded by most standard
techniques. The brazing temperature must be kept under 1450° F and cycle time
minimized to avoid loss of heat treated strength. Heat treating should be performed
subsequent to welding to obtain uniform high strength. The alloy is not susceptible to an
increase in magnetic attraction from plastic deformation during service such as occurs
with the ferromagnetic stainless steels.
-
![Boatboard® Anti-Slip HDPE]( "Boatboard® Anti-Slip HDPE")
Boatboard® Anti-Slip HDPE
BOATBOARD® Anti-Slip offers a high friction surface and the durability of our rigid HDPE materials. - Simona BOATBOARD® Anti-Slip HDPE won't delaminate, rot or splinter, and its integral colors hide scratches and marring that ruin painted surfaces. Its stain resistance, easy-to-clean matte finish and consistent flatness assure long lasting appearance and functionality. In surface applications, this tough, UV resistant HDPE marine grade sheet withstands long term exposure to intense sun, salt water and rigorous use. This also makes it ideal for outdoor patio, poolside and marina surfaces. Its impact resistance, easy-to-clean surface and attractive appearance enhance indoor retail, poolside, clinical and scientific cabinetry as well.
BOATBOARD® Anti-Slip provides excellent rigidity and flatness in fabrication, which means it's really easy to machine using standard woodworking equipment and keeps its flatness throughout its life as boating platforms and decking. BOATBOARD® Anti-Slip has a scratch-resistant surface finish and gloss level that is preferred by most fabricators. It's offered in the industry's widest range of standard colors and textures and maintains color consistency from order to order.
Textures: Standard Semi-Gloss Finish OR Premium Textures such as the Dot or Diamond Pattern that offers exceptional surface friction in slippery conditions.
-
Boltaron® 4800
Boltaron 4800 is a proprietary, fire retardant, extruded Acrylic/PVC alloy sheet designed specifically for mass transit interior applications. Boltaron 4800 meets ASTM E-162 and ASTM E-662 stringent requirements for flammability and low smoke emissions and FTA, UMTA and Docket 90A guidelines. Boltaron 4800 offers excellent impact strength, abrasion resistance, stain and chemical resistance, and thermoformability.
Applications:
Instrument panel housings - Class dividers - Bulkhead laminates - Galley and lavatory components - Bull noses, gap covers, moldings - Sidewall and kick panels - Window reveals - Seat parts - Tray tables - Passenger Service Units (PSUs) - Light housings
- Video monitor shrouds - Life vest shrouds - Air ducts
-
Brass
Brass shapes available for online purchase include: Brass Flat Bar, Hex Rod, Pipe, Round Bar, Sheet, Plate, Square Bar, Round Tube, Round Seamless, & Shim Stock Rolls.
- Professional Plastics has warehouse and logistics capabilities in the USA, Singapore and Taiwan.
-
Breather/Bleeder D3000-2.5
Breather/Bleeder D3000-2.5 is a stretchable non-woven polyester felt with an excellent drape which enables it to conform closely to the contours of the part. The material's multidirectional stretch, combined with a low density, light weight construction, makes D3000-2.5 a highly efficient breather.
D3000-2.5 contains no binders that will cause restricted air flow or that will cause adhesion to the part or other components
-
![CAB - Cellulose Acetate Butyrate]( "CAB - Cellulose Acetate Butyrate")
CAB - Cellulose Acetate Butyrate
CAB - Cellulose Acetate Butyrate is available from Professional Plastics in both Tubes & Sheets
CAB Tubing combines optical clarity and scuff and impact resistance with ease of fabrication. It can be easily cut, bonded with cement and printed. TPI's CAB is UL rated. CAB tubing is ideal in any length for storage, packaging and shipping. Tubes are transparent and rigid with excellent dimensional stability and rigid with excellent dimensional stability and high impact strength. They are strong, durable and easy to fabricate. It can be cut and sawed with standard equipment and is ideally suited for plastic packaging and tubing, especially for scientific products. CAB is available in FDA approved formulations for medical and food related uses. Stock sizes range from 1/16" I.D. to 6" O.D. and up to 8" O.D. on custom orders in a variety of wall thickness.
CAB Sheet is used for high gloss vacuum formed faces in back lighted signs, especially small point of purchase signs. Designers of display units especially like CAB sheet for its deep-draw properties, ease of formability, and impact resistance. CAB Sheet is a highly impact-resistant plastic used for thermoforming a variety of OEM products for various applications. It qualifies as a Type I, Grade I material for Fabricating and Forming per ASTM D2411-69. Combining long-term weather resistance with clarity and ease of forming at a wide range of temperatures. It is adaptable to most conventional methods of heating and forming. It will form satisfactorily at temperatures ranging from about 230°F to about 320°F. It heats and cools considerably faster than most other plastic sheet used for forming outdoor components.
-
Chemours® NXT 70 PTFE
Chemours® NXT 70 PTFE is a chemically modified polytetra-fluoroethylene polymer. When properly processed, Chemours® NXT 70 exhibits the superior properties typical of the fluoropolymer resins: nonaging characteristics, chemical inertness, heat resistance, toughness and flexibility, low coefficient of friction, nonstick characteristics, negligible moisture absorption, and weather resistance.
In addition, Chemours® NXT 70 offers weldability, improved resistance to deformation under load, increased resistance to permeation of chemicals, and a higher dielectric breakdown voltage. This grade exhibits minimal sagging (typical of modified PTFE) in billets as large as 350 kg (800 lb).
-
![Cogetherm® - Mica Laminate Insulation Board]( "Cogetherm® - Mica Laminate Insulation Board")
Cogetherm® - Mica Laminate Insulation Board
Cogetherm® Mica plates for high-performance thermal and electrical insulation. Cogetherm is a mica laminate designed for electromechanical and thermomechanical applications.
Cogetherm is made in two standard types: Cogetherm M (Muscovite) & Cogetherm P (Phlogopite)
Cogetherm M, consists of +/-90% Cogemica Muscovite and +/-10% of bonding material. Cogetherm M has the highest resistance to pressure and is most recommended for complicated cut pieces. For continuous service temperature with temperatue up to 500° C (932° F), we recommend Cogetherm M.
Cogetherm P, consists of +/-90%Cogemica-Phlogopite and +/-10% of bonding material. The resistance to pressure of Cogetherm P is less than M and it should be applied only for continous applications > 500° C (932°F)
Both Cogetherm M & Cogetherm P are also available in a "desmoked" grade which emits reduced fumes during it's first applicaction. These grades are known as MC & PC.
- Standard Plate Size (untrimmed): 40" x 48" - which can be cut down to 20" x 24" sheets for shipping
- Thin Gauge Muscovite 505 & Muscovite 132 as well as Phlogopite 505 & Phlogopite 132 Sheets are produced in 39.27" x 23.62" & 47.24" x 39.29" Sheets.
-
![CPVC Pipe]( "CPVC Pipe")
CPVC Pipe
CPVC Pipe - For Superior Corrosion Resistance in High Temperature Applications
Harvel CPVC pipe is produced from a specialty blend of Corzan® CPVC material with unique physical properties desirable for piping applications (i.e., improved impact resistance and good fire resistance capabilities). The CPVC product line includes schedules 40 and 80 piping from 1/4" through 16" diameters. Harvel CPVC piping systems can handle more than three-fourths of the temperature/pressure requirements of today's typical process plants. CPVC pressure pipe has an upper working temperature limit of 200°F (93°C), or approximately 60°F (15°C) above that of Type I Grade I PVC. As with all thermoplastic piping systems, CPVC's ability to withstand pressure varies with pipe diameter, wall thickness, and temperature. For pressure piping applications it is recommended for temperatures as high as 200°F (93°C) when appropriate temperature de-rating factors are applied. As the pipe diameter and temperature increases, the pressure rating of the product decreases. For example, 1/2" Schedule 80 CPVC pipe is engineered for continuous service of 850 psi @ 73°F (23°C). The same pipe in service @ 180°F (82°C) carries a maximum working pressure rating of 210 psi at this temperature. 6" Schedule 80 CPVC pipe is designed for 270 psi @ 73°F, and 54 psi @ 200°F.
-
CPVC Sheet - CPVC Rod - Gray
CPVC shares most of the features and properties of its close relative, PVC. It is also readily workable, including machining, welding, and forming. Because of its excellent corrosion resistance at elevated temperatures, CPVC is ideally suited for self-supporting constructions where temperatures up to 200°F (93°C) are present. The ability to bend, shape, and weld CPVC enables its use in a wide variety of process applications including tanks, scrubbers, and ventilation systems. It exhibits excellent fire resistance, chemical resistance, and is readily available in sheets, rods, and tubing.
- Color: Light Gray
-
CPVC White (PVC-C) FM4910
Flametec™ Cleanroom PVC-C (CPVC) is a CPVC-based resin in Ultra White Color for the Semiconductor Industry. This Ultra-White Cleanroom PVC-C sheet material is designed to be the most economical choice in FM 4910 materials. Vycom's Cleanroom PVC-C has been audited and tested in accordance with the FM 4910 protocol. It meets the test criteria with an FPI of 2 (limit of 6 max) and an SDI of 0.1 ( 0.4 max). PVC-C is FM listed at .250" thickness and above. PVC-C (CPVC) Based Sheet is available in 48" x 96" sheets in gauges of 1/8" through 1" and meets the demand for aesthetics and functionality in clean room wet process equipment . FM4910 rating is only for thicknesses of .250" and above.
-
CRP-1 PVC FM-4910
CRP-1 Sheet - FM 4910 Listed (at .250"+) - Enhanced Performance PVC-based Sheet - WHITE - Simona CRP-1 (formerly Lam CRP-1)
Simona CRP-1's proprietary formulation provides an FM 4910 rated PVC-based sheet with improved surface gloss and easier weldability compared to PVC-C. Its temperature resistance exceeds that of standard PVC compounds and withstands the requirements of typical wet bench cabinetry and enclosures. LAM CRP-1's high gloss, and its consistent surface and color quality also afford exceptional long-lasting clean-room aesthetics over PVC-C based sheet materials. Lamcorr offers its unique JSR rod to weld LAM CRP-1 to LAM PVDF sheet and components. Color is WHITE
Proven Applications for CRP-1 FM 4910 Listed Sheet:
- Semicon process enclosures
- Rinse modules
- Wafer transfer interfaces
- Dry tool enclosures, components
- Electrical cabinets
Standard Size: 48" x 96"
- Extruded Gauges: .250" to 1.0"
- Pressed Gauges: 1.0" through 4.0"
-
![Cutting Boards HDPE (Generic)]( "Cutting Boards HDPE (Generic)")
Cutting Boards HDPE (Generic)
Cutting boards are made from premium HDPE sheet with a textured surface. Sanitary HDPE cutting boards are used in a wide of applications -- from home use to commercial food preparation, and food packing & handling equipment.
HDPE can be ordered in three standard sheet sizes:
- 48" x 96" sheets (gauge sizes ranging from 1/4" to 1")
- 48" x 120" sheets (gauge sizes ranging from 1/4" to 1")
- 60" x 120" sheets
We also offer custom-cutting services to provide you with the exact sheet size you need.
- Professional Plastics offers generic cutting boards as well as, premium brands such as Sanatec, Sanalite & King.Cutting boards are made from premium HDPE sheet with a textured surface. Sanitary HDPE cutting boards are used in a wide of applications -- from home use to commercial food preparation, and food packing & handling equipment.
HDPE can be ordered in three standard sheet sizes:
- 48" x 96" sheets (gauge sizes ranging from 1/4" to 1")
- 48" x 120" sheets (gauge sizes ranging from 1/4" to 1")
- 60" x 120" sheets
We also offer custom-cutting services to provide you with the exact sheet size you need.
- Professional Plastics offers generic cutting boards as well as, premium brands such as Sanatec, Sanalite & King.
-
Delrin® AF Blend - 13% PTFE (Standard)
Delrin® AF Blend (Delrin® AF Blend with13% PTFE [Standard Grade] ) Delrin AF Blend is a unique thermoplastic material for use in moving parts in which low friction and long wear life are important. It is a combination of PTFE fibers uniformly dispersed in Delrin® acetal resin.
- Delrin® AF Blend typically includes 13% PTFE Fibre-Filled
- LF-13 is always a 13% PTFE Powder-Filled.
- Also available in Full-Strength Delrin 100AF - 20% PTFE on a Custom Order Basis.
- DE588 is a Delrin® 100AF fully-certified for US Naval Specifications.
-
Densetec HDPE Playground Board
Densetec Playground Board is making a big splash in the playground industry. The variety of bright contrasting colors make it perfectly suited to this environment where high impact colors are required. Because the color is embedded in the sheet, it never needs painting. Especially with the rigors and abuse that children inflict upon playground equipment, this material lasts much longer than wood.
The versatile properties of Densetec Playground Board make it virtually vandal resistant. The UV stabilizers added to the material make the colors fade-resistant and the standard properties of the HDPE used in the production of Densetec Playground Board make it weather-resistant and the perfect choice for outdoor environments.
Design potential is unlimited with Densetec Playground Board.
-
Durostone® Wave Solder Pallet Material
Durostone® wave solder pallet materials have excellent mechanical properties at elevated temperatures. These products have become the industry standard for the production of wave solder pallets used in the printed circuit board industry.
Durostone is easier to handle in the production process than other products used for PCB tooling due to two factors:
- The density, which helps to reduce the weight of the finished tooling.
- The glass and resin content, which ensures that the line operators and the machinists are not subjected to skin irritation alleviating any health & safety concerns.
Durostone® is Produced in Three Standard Grades:
- CHP 760 (Blue) (Standard)
- CAS 761 (Black) (Anti-Static)
- CAG 762 (Grey) (Anti-Static, Optical)
Other Durostone® Specialty Grades:
- CFR 762 (Black)(Flux-Resistant) - For Harsh Environments
-
Fabreeka Pads
Fabreeka Pads for Impact Shock Control - Fabreeka pad is the original fabric reinforced, elastomeric pad developed in 1936. The properties of the Fabreeka pad are exceptionally suited for the reduction of impact shock.
Fabreeka pad has been used for over 70 years for mounting heavy machinery where absorption of impact shock and isolation of transmitted vibration is desired. Fabreeka pad prevents cracking and flaking of concrete, eliminates the need for grout and prolongs the life of both machines and structures. Fabreeka pad is scientifically constructed to give years of service under the most severe operating conditions.
-
![Fishpaper - Vulcanized Fibre Sheet]( "Fishpaper - Vulcanized Fibre Sheet")
Fishpaper - Vulcanized Fibre Sheet
Fish Paper (aka Fishpaper - Vulcanized Fibre) is a strong paperboard insulation used primarily for its excellent electrical insulating properties. Fish paper is a vulcanized fiber and is very flexible. Used frequently for electrical insulation, fishpaper is commonly die cut and machined. Fishpaper is extremly durable and is available both in sheet stock and custom parts.
Vulcanized Fibre is made between .0078" and .375" thick. It is made in several colors, and several grades. The most common grade is Standard Electrical Grade which is commonly referred to as Fishpaper.
- Standard Electrical Grade Vulcanized Fibre (aka Fish Paper - Fishpaper): is made only in thinner gauges, typically from .0078" to .062" thick. It has very good electrical insulating properties, and is more flexible with good forming capabilities for applications such as slot wedge insulation.
- Standard Color is Grey
Vulcanized Fibre (Fishpaper) is sold under various tradenames including; Peerless, Vulcanex, Forbon, and Armite.
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
