-
CPVC White (PVC-C) FM4910
Flametec™ Cleanroom PVC-C (CPVC) is a CPVC-based resin in Ultra White Color for the Semiconductor Industry. This Ultra-White Cleanroom PVC-C sheet material is designed to be the most economical choice in FM 4910 materials. Vycom's Cleanroom PVC-C has been audited and tested in accordance with the FM 4910 protocol. It meets the test criteria with an FPI of 2 (limit of 6 max) and an SDI of 0.1 ( 0.4 max). PVC-C is FM listed at .250" thickness and above. PVC-C (CPVC) Based Sheet is available in 48" x 96" sheets in gauges of 1/8" through 1" and meets the demand for aesthetics and functionality in clean room wet process equipment . FM4910 rating is only for thicknesses of .250" and above.
-
![CPVC-350 - ESd FM 4910 (Bending Grade)]( "CPVC-350 - ESd FM 4910 (Bending Grade)")
CPVC-350 - ESd FM 4910 (Bending Grade)
CPVC-350™ - ESd FM 4910 (Bending Grade)
Static Dissipative CPVC Sheet to meet Factory Mutual FM-4910
CPVC-350™ FM 4910 is a plastic sheet product that controls static electricity in clean room applications requiring flame retardant clear plastic. These applications include bent and contoured panels for: cleanroom glazing, equipment covers, enclosures, and windows. The product is a Factory Mutual 4910* compliant chlorinated polyvinyl chloride sheet coated with SciCron Technologies clear, C-350™ static dissipative coating to prevent charge generation on the sheet surfaces. This controls particulate attraction and prevents electrostatic discharge (ESD) events completely independent of humidity. CPVC-350 - FM 4910 has excellent flammability and smoke generation properties, plus superior chemical resistance and bending properties.
*The CPVC substrate used to make this product has been tested according to procedures outlined in the Factory Mutual Clean Room Materials Flammability Test Protocol (Class 4910) and is listed in the Factory Mutual Research Approval Guide. It has been formulated to resist fire and to emit low levels of smoke when tested according to this protocol. The C-350 coated product, CPVC-350 - FM 4910, has not been similarily tested by Factory Mutual Research, however, it is very unlikely that the presence of the C-350 coating on the sheet surfaces has any influence on the flammability characteristics of the sheet when tested according to the 4910 protocol. The C-350 coating, which is only one micron thick, is formulated with an incombustible conductive metal oxide which makes up 66% of the coating weight. The remainder of the coating adds less than 0.3 gram of combustible binder per square foot of coated sheet surface. The addition of such a small fractional percentage of combustible material is extremely difficult to detect.
- CPVC-350 - FM 4910 is available in a Transparent Blue-Gray Tint.
- Standard Thicknesses: 0.125", 0.187", 0.250", 0.375", 0.500", 1.00"
- Standard Sheet Size: 48" x 96" nominal (trimmed size - 47" x 97")
-
![CR-39 ®(Homalite H-911®)]( "CR-39 ®(Homalite H-911®)")
CR-39 ®(Homalite H-911®)
Homalite Company is No Longer in Business, but Professional Plastics can supply an equivalent product meeting these specifications.
- Request a Quote Now for current pricing, lead-times and applicable datasheets
Homalite H-911 CR-39® is a ultra-high optical quality sheet that provides solutions to challenging glazing & display applications in the Nuclear, Electronic & Aerospace industries.
CR-39® monomer is the dominant material for eyeglass lenses. Homalite casts CR-39® monomer into sheet form known by the trade name H-911. Homalite H-911 is clear, hard, almost colorless, and thermally set.
Its surfaces are comparable in smoothness, luster, and chemical resistance to polished plate glass.
Optional Surfaces:
Homalite material which is used as a filter/window in front of a display is often specified with a low-reflectance finish. These surface finishes minimize glare by reducing specular reflection. Unlike other filters, the low glare surface of Homalite filters is cast into the material. This surface is not a lamination or coating so it cannot separate, chip, peel or rub off. Two low-reflectance surfaces are available:
- LR72 - The most light-diffusing surface. For mounting as close as possible to the light source. This finish provides a high level of light diffusion and is also characterized by its ability to provide resolution of 12 point, 1/8 inch high (pica) print or larger characters when the filter source is at a parallel to the plane of the light source at a distance of no greater than 1/2 inch from the source. Characters should be viewed perpendicular to the surface of the filter in ambient light (100 foot-candles.)
- LR92 - This finish provides a lesser degree of light diffusion but higher resolution than LR 72 described above. Typically 12 point 1/8 inch high print or characters can be resolved through the part when it is placed parallel to the plane of the light source at a distance of no greater than 2 inches from the source. Characters should be viewed perpendicular to the surface of the filter at ambient light.
-
CRP-1 PVC FM-4910
CRP-1 Sheet - FM 4910 Listed (at .250"+) - Enhanced Performance PVC-based Sheet - WHITE - Simona CRP-1 (formerly Lam CRP-1)
Simona CRP-1's proprietary formulation provides an FM 4910 rated PVC-based sheet with improved surface gloss and easier weldability compared to PVC-C. Its temperature resistance exceeds that of standard PVC compounds and withstands the requirements of typical wet bench cabinetry and enclosures. LAM CRP-1's high gloss, and its consistent surface and color quality also afford exceptional long-lasting clean-room aesthetics over PVC-C based sheet materials. Lamcorr offers its unique JSR rod to weld LAM CRP-1 to LAM PVDF sheet and components. Color is WHITE
Proven Applications for CRP-1 FM 4910 Listed Sheet:
- Semicon process enclosures
- Rinse modules
- Wafer transfer interfaces
- Dry tool enclosures, components
- Electrical cabinets
Standard Size: 48" x 96"
- Extruded Gauges: .250" to 1.0"
- Pressed Gauges: 1.0" through 4.0"
-
![Cutting Boards HDPE (Generic)]( "Cutting Boards HDPE (Generic)")
Cutting Boards HDPE (Generic)
Cutting boards are made from premium HDPE sheet with a textured surface. Sanitary HDPE cutting boards are used in a wide of applications -- from home use to commercial food preparation, and food packing & handling equipment.
HDPE can be ordered in three standard sheet sizes:
- 48" x 96" sheets (gauge sizes ranging from 1/4" to 1")
- 48" x 120" sheets (gauge sizes ranging from 1/4" to 1")
- 60" x 120" sheets
We also offer custom-cutting services to provide you with the exact sheet size you need.
- Professional Plastics offers generic cutting boards as well as, premium brands such as Sanatec, Sanalite & King.Cutting boards are made from premium HDPE sheet with a textured surface. Sanitary HDPE cutting boards are used in a wide of applications -- from home use to commercial food preparation, and food packing & handling equipment.
HDPE can be ordered in three standard sheet sizes:
- 48" x 96" sheets (gauge sizes ranging from 1/4" to 1")
- 48" x 120" sheets (gauge sizes ranging from 1/4" to 1")
- 60" x 120" sheets
We also offer custom-cutting services to provide you with the exact sheet size you need.
- Professional Plastics offers generic cutting boards as well as, premium brands such as Sanatec, Sanalite & King.
-
![Delrin® 100AF - 20% PTFE (Custom Order)]( "Delrin® 100AF - 20% PTFE (Custom Order)")
Delrin® 100AF - 20% PTFE (Custom Order)
Delrin® 100AF (20% PTFE Full-Strength ) is a high viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel,
itself, and other surfaces. This is a CUSTOM-GRADE only.
Delrin 100AF Sheet (Full Strength 20% PTFE Filled) is classified as National Stock Number NSN: 9330012803453, Part Number: DELRIN100AF
Delrin 100AF Rod (Full Strength 20% PTFE Filled) is classified as National Stock Number NSN: 9390012925602, Part Number: DELRIN100AF
Delrin 100AF Strip (Full Strength 20% PTFE Filled) is classified as National Stock Number NSN: 9330013470067, Part Number: DELRIN100AF
Note:
The large majority of Delrin 100AF shapes commercially available today are actually blended down to a 13% PTFE known as Delrin AF Blend. For this reason, when customers require a full 20% PTFE filler, we ask that they request material as "Full-Strength Delrin 100AF". - Full-Strength Delrin 100AF is available as a Custom-Order Only, as no domestic extruders manufacture this grade as standard.
-
Delrin® 500AF
Delrin® 500AF is a medium viscosity acetal homopolymer resin containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low coefficient of friction against steel, itself, and other plastics.
-
Delrin® 527 UV Resistant
Delrin® 527UV Weather Resistant Black- replaces Delrin 507
- This material replaced Delrin® 507 which has been discontinued by DuPont.
Delrin® 527UV is a black homopolymer acetal that has been enhanced with UV stabilizers. It is also available in natural on a custom run basis. Developed by DuPont to replace Delrin® 507, this material is particularly suited to automotive and other outdoor applications. It exhibits improvements in UV aging characteristics and thermal stability. Delrin® 527UV is typically used for industrial applications exposed to the outdoors in such industries as electronics, communications, transportation, construction and marine.
-
Delrin® 570 - 20% Glass-Filled Acetal
Delrin® 570, this grade has 20% glass fiber filler. It has much greater mechanical properties over unfilled acetals.
Delrin® Glass Filled provides the same basic properties as Delrin®, with added strength. Delrin® Glass Filled is a tough material that provides the added advantages of greater stiffness, improved creep resistance, low warpage and higher dimensional stability than Delrin® because it possesses surface characteristics of Teflon®. Parts designed using glass-filled will demonstrate good impact resistance, low deformation under load and high fatigue endurance. Delrin® Glass Filled is an excellent choice for its long-term mechanical stability in applications such as Anti-Friction Parts, Application Bearings, Gears and Parts requiring greater stiffness, Electrical Components and other Close Tolerance Precision Parts and Fuel System Parts.
Note: This item is NOT a standard stock item. Minimum order & lead-time may apply.
-
Delrin® AF Blend - 13% PTFE (Standard)
Delrin® AF Blend (Delrin® AF Blend with13% PTFE [Standard Grade] ) Delrin AF Blend is a unique thermoplastic material for use in moving parts in which low friction and long wear life are important. It is a combination of PTFE fibers uniformly dispersed in Delrin® acetal resin.
- Delrin® AF Blend typically includes 13% PTFE Fibre-Filled
- LF-13 is always a 13% PTFE Powder-Filled.
- Also available in Full-Strength Delrin 100AF - 20% PTFE on a Custom Order Basis.
- DE588 is a Delrin® 100AF fully-certified for US Naval Specifications.
-
Delrin® AF- DE588
Delrin® AF DE-588 is 20% Teflon-Filled Delrin®, fully certified for U.S. Navy use, brown color.
- NAVSEA 6959311 Rev. B, NAVSEA 803-4384678 Rev. B & C
- NSN: 9330011953331 DELRIN-AF-DE-588 Plastic Sheet
- NSN: 9390012222128 DELRIN AF DE 588 Nonmetallic Rod
- NSN: 9390012231437 DELRIN AF DE 588 Nonmetallic Rod
- NSN: 9390012646826 DELRIN AF-DE 588 Nonmetallic Rod
- NSN: 9390013162226 DELRIN AF DE 588 Nonmetallic Rod
- NSN: 9390014651102 DELRIN AF DE 588 Nonmetallic Rod
-
Delrin® Sheet & Rod (Acetal Homopolymer)
DELRIN® Sheets and Delrin Rods have many of the same characteristics of industrial metals such as brass, aluminum, zinc & stainless steel. Delrin plastic is a homopolymer acetal (POM). Typical properties include stiffness, dimensional stability, impact resistance, and structural strength. Delrin® 150 is standard general purpose, unfilled acetal. This grade has the best impact toughness of all unfilled Delrin products.
- Delrin Rods are Produced in Standard 8 Foot Lengths. (Maximum Length is 8 Foot)
-
Densetec HDPE Playground Board
Densetec Playground Board is making a big splash in the playground industry. The variety of bright contrasting colors make it perfectly suited to this environment where high impact colors are required. Because the color is embedded in the sheet, it never needs painting. Especially with the rigors and abuse that children inflict upon playground equipment, this material lasts much longer than wood.
The versatile properties of Densetec Playground Board make it virtually vandal resistant. The UV stabilizers added to the material make the colors fade-resistant and the standard properties of the HDPE used in the production of Densetec Playground Board make it weather-resistant and the perfect choice for outdoor environments.
Design potential is unlimited with Densetec Playground Board.
-
![Densetec™ Marine Board]( "Densetec™ Marine Board")
Densetec™ Marine Board
Densetec™ High Density Polyethylene Marine Board is specially formulated to withstand the rigors of harsh outdoor marine environments. It is UV-stabilized to resist damage and retain its beauty, even after years of direct sunlight. Densetec™ is replacing wood and laminates in boating applications, because it does not splinter, crack, delaminate, rot, swell or absorb water like traditional materials. Even under heavy foot traffic on yacht decks, it remains virtually maintenance-free. There is no need to stain or paint Densetec Marine Board every few years. The color is integrated with the polymer and retains its vibrant appearance better than painted wood. Fabrication and finishing are easy with standard woodworking tools. Densetec&trade Marine Board forms easily for smooth curves and bends.
Standard Colors: Polar White, Seafoam, Sand Shade Stone Grey, Light Grey, Dolphin Grey and Black. - Colors can also be matched to your exact requirements.
Standard Size: approx 1371mm x 2440mm (54" x 96"). Other sizes available upon request
Standard Thicknesses: .250", .375", .500", .750", 1.00", 1.25", and 1.50".
Standard Finish: Textured.
Applications: Cabinets and countertops, Doors and Windows, Frames, Swim Platforms, Trim and Molding, Steps and Ladder Tread, Railing, Bait Tank Covers, Hatch Covers
-
![Durapol® CDM ESD 68910N]( "Durapol® CDM ESD 68910N")
Durapol® CDM ESD 68910N
Durapol® CDM ESD 68910N is a composite material based on glass mat reinforcement in combination with dissipative, high temperature and high corrosion resistant resin system. CDM ESD 68910N is a new generation material taking into account the necessity of thin walls machining. Electrostatic discharge damage electronic components and circuits every day. To use CDM will allow charges to move slowly out of the circuit and will ensure the quality of your production. CDM ESD product have guaranteed dissipative characteristics. The CDM range of products exhibits higher mechanical and resistance properties as standard composite materials. The random glass mat substrate present in the CDM ESD 68910N minimizes delamination problems during machining or pallet use. The relative low thermal conductivity in the CDM materials allows quick pallet turnaround eliminating most of the time both the necessity to provide a cooling station and the process heat sink effect experienced in the metallic pallets.
- CDM materials can substitute metallic solder frames with great advantages.
Flux resistance is depending on composition and pH level. CDM has been developed to have a better withstand towards chemicals. To preserve the stability of CDM material, a regular cleaning can still be made. Due to the high fiberglass content, machining is recommended with carbide or diamond toolings. Precise machining with very accurate tolerances can be achieved by experts in the conception and machining of pallets.
Applications:
Full process solder wave, SMT and selective soldering process - Components insertion - Silk screen printing of solder paste in SMT - SMT placement Reflow soldering - Components protection - Testing of PCBs
-
DuraSurf™ ETA Tape - Adhesive-Backed
DuraSurf™ ETA (Easy To Apply) - Adhesive-Backed UHMW Tape offers the excellent abrasion resistance, low coefficient of friction, high impact strength and high performance people have come to expect from UHMW. By providing this exceptional material with an adhesive backing, installation time and costs are significantly reduced. No need for bolts or fasteners, no need to countersink.
Available in Seven Different Adhesive Types:
- FT 8345 SF (standard adhesive). This 5-mil rubber-based adhesive designed for applications requiring high tack and adhesion with excellent shear strength. Specially formulated with a 1-mil polyester carrier and sta-flat liner to provide excellent die cutting and adhesion to low surface energy substrates. Maximum operating temperature: 175°F (79°C) continuous, 200°F (93°C) intermittent.
- Optional Adhesives: FT 1150, FT 1123, FT 1126, FT 8346, HPA 1905, UHA 1198 (see brochure for details)
-
Ensolite® PVC-NBR Foam
Ensolite PVC-NBR is an energy absorbing foam originally deveoped by NASA to protect pressure from damage.It has virtually 100% memory and is waterproof. The Ensolite® product line offers a broad range of products based on PVC/NBR for applications in the athletic, flotation, industrial, and automotive markets. The continuous roll stock provides economies in fabrication. Made in several grades and densities.
-
EPDM Rubber Sheeting
EPDM (Ethylene Propylene Diene Monomer) sheet provides outstanding resistance to weathering, ozone and UV exposure.
It is highly recommended for applications where the elastomer will have excessive exposure to the environment.
It provides excellent chemical resistance and dynamic properties. E.P.D.M. material is considered a non-oil resistant material.
EPDM Rubber Sheet is a variety of thicknesses and rolls sizes. - Typically supplied in 36" wide in 50 A & 60 A Durometer hardnesses
Standard Size Rolls:
- 1/32" x 150 ft
- 1/16" x 75 ft
- 3/32" x 75 ft
- 1/8" x 50 ft
- 3/16" x 35 ft
- 1/4 x 35 ft
- 3/8" x 25 ft
- 1/2" x 37ft
-
Ertalyte® PET-P
Ertalyte® PET-P is an unreinforced, semi-crystalline thermoplastic polyester characterized as having the best dimensional stability coupled with excellent wear resistance, a low coefficient of friction, high strength, and resistance to moderately acidic solutions. Ertalyte® is capable of sustaining high loads and enduring wear conditions. Ertalyte® PET-P offers good chemical and abrasion resistance. Its low moisture absorption enables mechanical and electrical properties to remain virtually unaffected by moisture.
Also Consider Ertalyte TX - Ertalyte® TX is an internally lubricated version of PET-P, providing enhanced wear and inertness over general purpose nylons or acetals.
-
![Ertalyte® TX]( "Ertalyte® TX")
Ertalyte® TX
Ertalyte® TX for machining high-wear-resistant parts is an unreinforced semi-crystalline thermoplastic polyester (PET-P) that has a solid lubricant filler. The material has excellent performance in both high-pressure and high-velocity conditions, and is ideally suited for applications involving soft metal and plastic mating surfaces.
Key properties of Ertalyte TX, are its high strength and stiffness, high wear-resistance, very good dimensional stability, high creep resistance and very good chemical resistance. This combination of properties make it an ideal material for machining bushings and bearings that require no startup or running lubrication. Ertalyte TX has FDA and USDA compliance and is ideal for applications in food packaging and processing equipment. Ertalyte TX shapes offer dimensional stability, wear resistance, and low-friction characteristics superior to those properties of competitive filled polyethylene terephthalate polymers.
- Excellent replacement for full-strength Delrin® AF, when parts require food contact.
- Standard Sheet Size: 24" x 39.4"
- Standard Rods: 10 Foot (may be cut in-half for FedEx or UPS Shipping to save freight) - add Shipping Note at Check-Out or Call for Assistance
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
