| Items Per Page:
Pages: 1 2 3
|
-
PEEK Screws
PEEK Screws, Nuts, Threaded Rods & Other Fastener Components are available from Professional Plastics.
PEEK is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.
-
Vespel® SP-1 Machine Screw, Flat Head, Slotted
Vespel® SP-1 Machine Screw, Flat Head, Slotted Drive - Vespel® SP-1 Parts are high-performance polyimide shapes for the world's most demanding applications. Dupont Vespel screws and other parts offer a broad combination of temperature resistance, chemical resistance, mechanical toughness, natural lubricity,wear-resistance and insulation properties. Parts made from DuPont Vespel SP-1 provide operating temperatures from cryogenic to 300°C (570°F), great plasma resistance, plus a UL rating for minimal electrical and thermal conductivity. Vespel® SP-1 is the unfilled base resin grade. SP-1 provides maximum physical strength, elongation, and toughness as well as the best electrical and thermal insulation values.
-
Vespel® SP-1 Machine Screw, Pan-Head, Slotted
Vespel® SP-1 Machine Screw, Pan-Head, Slotted Vespel® Screws
Vespel ® SP-1 Parts are high-performance polyimide shapes for the world's most demanding applications. Dupont Vespel screws and other parts offer a broad combination of temperature resistance, chemical resistance, mechanical toughness, natural lubricity,wear-resistance and insulation properties. Parts made from DuPont Vespel SP-1 provide operating temperatures from cryogenic to 300°C (570°F), great plasma resistance, plus a UL rating for minimal electrical and thermal conductivity.
Vespel ® SP-1 is the unfilled base resin grade. SP-1 provides maximum physical strength, elongation, and toughness as well as the best electrical and thermal insulation values.
-
Injection-Molded Plastic Screws
The most commonly molded plastic screws are made from Nylon 6/6. They are tough, resistant to corrosion, light weight, and good electrical insulators. Nylon components conform to irregular surfaces, provide vibration dampening, and offer an inexpensive alternative to more expensive metal parts. Molded threads approximate UNC/UNF 2A and 2B. Metric approximate 6g/6H.
Screws are also available in a variety of materials including: Delrin, Acetal Copolymer, Polycarbonate, PPS, Polypropylene, HDPE, LLDPE and dozens of others. The factory catalog contains more than 10,000 items, including screws, nuts, washers, spacers, bushings, panel fasteners, hole plugs, circuit board hardware, hose clamps, wire handling clips, cable ties, and more. Our plastic fasteners are molded in tough, corrosion-resistant Nylon 6/6, but are also available in a variety of other materials.
-
![Meldin® Polyimide Screws]( "Meldin® Polyimide Screws")
Meldin® Polyimide Screws
Meldin® 7001 Unfilled Polyimide Rods & Plates offer superior mechanical properties & high chemical resistance. Meldin® 7001 is ideal for electrical and thermal insulating applications. More ductile than ceramics, and lighter weight than metals, Meldin® 7001 is a popular choice for structural parts in aerospace and other applications where metal replacement is desirable. In Semiconductor Wafer Processing applications, the plasma etch rate of Meldin® 7001 is 10% to 20% lower than Vespel® SP-1 providing superior performance over time. (contact us for complete details). Meldin® 7001 is an excellent replacement for Vespel® SP-1
Meldin 7001 products feature operational temperatures of 600ºF for continuous operation and 900ºF for intermittent exposure, and tight tolerances of ±0.001 in. on both ODs and IDs.
The 7001 grade is suitable for high-temperature structural, high-purity semiconductor, and welding component applications.
We offer Meldin® screws is a wide range of types and sizes including pan head, flat head, hex head, socket head and customs screws to your specifications.
- Also see Meldin 7001 Rods & Plates
-
![Kel-F Screws & Fasteners - PCTFE]( "Kel-F Screws & Fasteners - PCTFE")
Kel-F Screws & Fasteners - PCTFE
PCTFE (Kel-F) fasteners includes screws, bolts, thumb screws, cap screws, nuts, washers, spacers, shoulder bushings, screw insulators, threaded rod and many other PCTFE items. PCTFE parts are manufactured to ANSI and DIN standards.
Kel-F - PCTFE (PolyChloroTriFluoroEthylene) Kel F is a fluorocarbon-based polymer and is commonly abbreviated PCTFE. PCTFE offers the unique combination of physical and mechanical properties, nonflammability, chemical resistance, near zero moisture absorption, and excellent electrical properties. These characteristics cannot be found in any other thermoplastic fluoropolymer with a useful temperature range of -400°F to +400°F. PCTFE also has extremely low outgassing, making it well suited for use in aerospace and flight applications.
- Custom prints for Kel-F PTCFE fasteners and components can be sent in all standard formats.
- Kel-F (PCTFE) parts are used in the Semiconductor, Aerospace, Chemical and Electronics Instries.
-
![Meldin® 7001 Polyimide (Unfilled)]( "Meldin® 7001 Polyimide (Unfilled)")
Meldin® 7001 Polyimide (Unfilled)
Meldin® 7001 Rods, Plates & Parts offer superior mechanical properties & high chemical resistance. Meldin polyimide is ideal for electrical and thermal insulating applications. More ductile than ceramics, and lighter weight than metals, Meldin® 7001 is an excellent choice for structural parts in aerospace and other applications where metal replacement is desirable. In Semiconductor Wafer Processing applications, the plasma etch rate of Meldin® 7001 is 10% to 20% lower than Vespel® SP-1 providing superior performance over time. (contact us for complete details). For IC Test Sockets & Probe Test Heads, Meldin® 7001 is also an excellent replacement for Vespel® SP-1. Meldin 7000 products feature Continuous Operational Temperatures up to 550ºF (260ºC) and Intermitting Operation up to 900ºF , while holding tight tolerances of ±0.001 in. on both ODs and IDs. Meldin 7001 is suitable for high-temperature structural, high-purity semiconductor, & plasma welding applications.
- Meldin Plates are Compression Molded & Meldin Rods are Isostatically Molded (ISO)
- Meldin DF Parts are Direct Formed. (contact us for custom quotes)
Typical Applications: Wafer Clamp Rings & Screws, IC Test Sockets & Nests, Plasma Torch Tips, Bearings, Seals, Insulators, Thrust Washers,
Semicon Insulator Bushing,
Hot Runner Insulator
- Stocked in Professional Plastics USA, Singapore & Taiwan Warehouses
-
![Plastic Parts - CNC Machining]( "Plastic Parts - CNC Machining")
Plastic Parts - CNC Machining
Plastic Parts - CNC Machining of plastics.
Professional Plastics and it's partners can provide precision turn-key plastic parts to your specifications. We offer the widest variety of high-performance engineering plastics in the industry and have a well-established record as a quality supply partner to companies in the aerospace and semiconductor industries. Precision manufactured plastic machined parts are available from more than 500 different materials including thermoplastics, thermoset laminates and composites and cermic materials.
- For a competitive price & fast turn-around, E-mail or Fax us your CAD drawing of your cnc plastic parts now.
- E-Mail: sales@proplas.com Phone (888) 995-7767 or Fax (866) 776-7527
Machining of Plastic Parts includes: Bearings, Sheaves, Washers, Thrust Washers, Guide Rails, Machine Guards, Wear Pads, Clamping Rings, Retaining Rings, Screws, Sliders, Bumpers, Rollers, Splines, Insulators, Lantern Rings, Nests, Sockets, Manifolds, Valves, Clamps, Seal Rings, Valve Seats, Layrinth Seals, Wear Rings, Seals, Mandrels, Connectors, Spur Gears and more.
Don't know what material to use ? - Try our Material Design Tool - Sortable Material Data Sheets.
-
UHMW Sheet & Rod (Virgin Grade)
UHMW Sheets and UHMW Rods (Virgin Grade) UHMW-PE - PE1000 offers a combination of excellent properties — outstanding abrasion resistance, superior impact resistance, non-sticking and self-lubricating properties and excellent mechanical properties, even in cryogenic conditions. UHMW Sheet and UHMW Rods reduce noise from impact & vibration. It is a self-lubricating material that is chemical, corrosion, and wear-resistant. UHMW is well-suited for drag conveyor flights, paddles, sprockets, and feed screws.
- UHMW is available in several filled grades including high-temperature, ceramic-filled, conductive & ESd versions.
- Shapes include: UHMW Sheets, UHMW Rods, UHMW Tubes, UHMW Film, and UHMW Profiles.
-
Acetal Hexagonal Bar
Acetal Hexagonal Bar is typically used for the manufacture of plastic fasteners and standoffs. This lightweight, moisture and corrosion resistant material is relatively tough and inexpensive. It is also easy to machine.
- Also see Nylon Hexagonal Bar.
-
Acetal Sheets & Acetal Rods (Copolymer)
Acetal Sheets and Acetal Rods (aka POM) acetal copolymer plastic sheets and acetal rods provide high strength and stiffness coupled with enhanced dimensional stability and ease of machining. Acetal Rods and Acetal Sheets are also characterized by a low coefficient of friction and good wear properties especially in wet environments. Because of its high strength, modulus, and resistance to impact and fatigue, Acetal is used as a weight-saving metal replacement. Acetal copolymer overcomes the common problem of centerline porosity in large shapes of Acetal Homopolymer (aka Delrin)
- Acetal Copolymer is preferred to Delrin® in high-pressure applications where centerline porosity is a concern.
- Acetal Copolymer is produced under several brand names including Celcon®, Ultraform® & Acetron®.
-
Acetron® GP Acetal
Acetron GP is MCAM-Quadrant EPP's general purpose acetal and is the only porosity-free acetal product available today. Investments in process technology by MCAM-Quadrant EPP now provide the performance and machinability of acetal without center core porosity. Our in-line photometric quality procedure assures every Acetron GP plate and rod is porosity-free as measured by MCAM-Quadrant EPP's quick check dye penetrant test. For details of test methods, contact MCAM-Quadrant EPP. Acetron GP natural is FDA, USDA, NSF, Canada AG and 3A-Dairy compliant.
-
Boltaron® 6800 Sheet
Boltaron® 6800 Sheet is ABS/PVC alloy press-laminated flame resistant material. It is developed specifically in adherence with aviation seat manufacturers' stringent requirements. BOLTARON 6800 Sheet exhibits such characteristics as: good hot tear strength, accurate reproduction of mold detail, deep draw without distortion, minimal moisture, and wide forming range. BOLTARON 6800 Sheet has been used extensively by seat manufacturers worldwide for more than 30 years.
-
![Cable Ties]( "Cable Ties")
Cable Ties
Types of Tyton Cable Ties:
- Standard Cable Ties - These all-purpose cable ties are designed to bundle and secure wires, cables, hoses and more. Made of PA66 material, standard cable ties are available in 18 to 50 pound tensile strengths, in a variety of lengths and colors.
- Standard Cable Ties - Special Materials - These cable ties are made in specialty polymer materials for applications in extreme environments. Available materials include heat resistant, UV stable and chemical resistant polymers with varying levels of humidity tolerance.
- Heavy Duty Cable Ties - Available in 120 to 250 pound tensile strengths, heavy duty cable ties are available in longer lengths for securing larger bundles.
- Wide Strap Cable Ties - These ties have a wide-yet-flexible strap that conforms to bundles to minimize pinching. Available in 120 pound tensile strength, in lengths for securing a variety of bundle sizes.
- Outside Serrated Cable Ties - Outside serrated ties are designed to minimize abrasion on sensitive wires, cables and hoses.
- Open Head Q Ties - Q Ties feature an open head and unique tail design to allow quick and easy application. Use with Q Mounts and Q Tags for a complete cable management system.
- Releasable Cable Ties - Releasable cable ties are designed for easy removal and reuse.
- Clamp Ties - Clamp ties feature a unique head design that provides an even, consistent compression around soft rubber hoses including fuel, water and air vacuum lines.
- Double Head Cable Ties - These ties create two loops to allow separation and harnessing of two wire, cable or hose bundles. The tie's second loop maybe secured around a fixed object to secure the bundle without the need for additional fasteners.
- Identification Cable Ties - Identification cable ties feature an integrated labeling area for pre-printed or manual write-on labeling.
- Stainless Steel Cable Ties - Stainless steel cable ties provide maximum tensile strength and excellent heat, chemical and corrosion resistance for securing wire, cable and hose bundles in extreme environments.
- Cable Ties - Special Function - HellermannTyton offers a variety of cable ties with unique features for use in specialized applications.
- Cable Ties for Automatic Tools - Available in 18 to 50 pound tensile strengths, these cable ties and closures come packaged in bandoliers and reels for use with HellermannTyton automatic cable tie fastening tools.
- Hook and Loop Grip Ties - Grip Ties are made with soft, flexible materials and a releasable hook and loop closure that is ideal for applications requiring repetitive access to cable and wire.
-
Champion Conduit Hangers®
Champion Conduit Hangers® - Champion bridge hangers are the right match for non-metallic conduit. These fiberglass conduit hangers are available in two standard configurations: the popular Intermediate Hanger and our Anchor Hanger (an Intermediate Hanger with side bracing). Along with the standard options listed above, Champion Hangers® also come in alternate configurations, so you always have the right fit for your bridge-related projects.
Special Bulk Pricing is available Commercial Electrical Contractors - Contact Rich Kietzke for details - r.kietzke@proplas.com.
-
CPVC Hexagonal Bar
CPVC Hexagonal Bar - Hexagonal CPVC shapes are used in component fabrication. Items such as nuts, bolts, washers and spacers can be readily machined from these items to provide durable corrosion-resistant components. Emphasis is placed on providing extrusions with minimal sink and smooth surfaces for dimensional consistency and easy reproduction of machined components.
-
Delrin® AF Blend - 13% PTFE (Standard)
Delrin® AF Blend (Delrin® AF Blend with13% PTFE [Standard Grade] ) Delrin AF Blend is a unique thermoplastic material for use in moving parts in which low friction and long wear life are important. It is a combination of PTFE fibers uniformly dispersed in Delrin® acetal resin.
- Delrin® AF Blend typically includes 13% PTFE Fibre-Filled
- LF-13 is always a 13% PTFE Powder-Filled.
- Also available in Full-Strength Delrin 100AF - 20% PTFE on a Custom Order Basis.
- DE588 is a Delrin® 100AF fully-certified for US Naval Specifications.
-
Delrin® Sheet & Rod (Acetal Homopolymer)
DELRIN® Sheets and Delrin Rods have many of the same characteristics of industrial metals such as brass, aluminum, zinc & stainless steel. Delrin plastic is a homopolymer acetal (POM). Typical properties include stiffness, dimensional stability, impact resistance, and structural strength. Delrin® 150 is standard general purpose, unfilled acetal. This grade has the best impact toughness of all unfilled Delrin products.
- Delrin Rods are Produced in Standard 8 Foot Lengths. (Maximum Length is 8 Foot)
-
FEP Rods & Sheets
FEP Rods & Sheets
FEP is a relatively soft thermoplastic with lower tensile strength, wear resistance, and creep resistance than many other engineering plastics. However, FEP is chemically inert and has a low dielectric constant over a wide frequency range. FEP possesses a very high degree of stress crack resistance, a low coefficient of friction, exceptional dielectric properties, heat resistance, retention of properties after service at 400°F (204°C) with useful properties at -454°F (-270°C), and meets FDA 21CFR.177.1550. FEP has high transparency (with good transmittance of UltraViolet and visible wavelengths.) FEP offers the lowest refractive index of all thermoplastics with low light reflection (the same as water.)
- FEP stands for Fluorinated Ethylene Propylene.
-
![Kel-F® - PCTFE]( "Kel-F® - PCTFE")
Kel-F® - PCTFE
Kel-F - PCTFE (PolyChloroTriFluoroEthylene) Kel F is a fluorocarbon-based polymer and is commonly abbreviated PCTFE. PCTFE offers the unique combination of physical and mechanical properties, nonflammability, chemical resistance, near zero moisture absorption, and excellent electrical properties. These characteristics cannot be found in any other thermoplastic fluoropolymer with a useful temperature range of -400°F to +400°F. PCTFE also has extremely low outgassing, making it well suited for use in aerospace and flight applications. Note: Kel-F® is a registered tradename of 3M Company. In 1996, 3M discontinued manufacturing of Kel-F & today, all PCTFE resin is manufactured by Daikin under the tradename of Neoflon ® or by Allied Signal under the tradename of Aclon ®. Kel-F is still the most commonly used tradename used to describe PCTFE.
- Standard Extruded Rod Lengths are 6 Feet Long (1828mm) - rods can be cut as needed
- Large Diameter Compression-Molded Rods & Tubes are typically 1 Foot Long (305mm)
- There is currently a Global Shortage of PCTFE Resin & Products - Please send your request ASAP & we will do our best to support your needs.
| Items Per Page:
Pages: 1 2 3
|
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
