-
O2B2 - Dual Wall - Lined Olefin Shrink Tube
O2B2 is a flexible heat shrinkable polyolefin tubing with a modified polyamide adhesive inner wall which melts and flows to seal components within.
- Features include: dual wall adhesive lined,
2 to 1 ratio, and flexible polyolefin.
- O2B2 is recommended for applications in environmental conditions which require sealing against moisture.
-
O2B2 Polyolefin Shrink Tube
O2B2 is a flexible heat shrinkable polyolefin tubing with a modified polyamide adhesive inner wall which melts and flows to seal components within.
O2B2 Polyolefin shrink tube is dual wall adhesive lined,
flexible polyolefin(for clear use O2C), and has a 2 to 1 ratio.
O2B2 is recommended for applications in environmental conditions that require
sealing against moisture.
-
PEEK - 30% Carbon-Filled
Peek 30% carbon-filled is 30% carbon fiber reinforced polyetheretherketone which is either extruded or compression-molded. The addition of carbon fibers enhances the compressive strength and stiffness of PEEK, and dramatically lowers its expansion rate. It offers designers optimum wear resistance and load carrying capability in a PEEK-based product. This grade provides 3-1/2 times higher thermal conductivity than unreinforced PEEK--dissipating heat from the bearing surface faster.
The addition of carbon fibers enhances the compressive strength and stiffness of PEEK, and dramatically lowers its expansion rate. It offers designers optimum wear resistance and load carrying capability in a PEEK-based product. This grade provides more thermal conductivity than unreinforced PEEK -- increasing heat dissipation from bearing surfaces improving bearing life and capability.
-
PEEK - 30% Glass Filled
PEEK - 30% Glass Filled Rods & Plates.
PEEK is an abbreviation for PolyEtherEther-Ketone, a high performance engineering thermoplastic. The addition of glass fibers significantly reduces the expansion rate and increases the flexural modulus of PEEK. 30& glass-filled PEEK grade is ideal for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F (150°C).
-
PEEK Screws
PEEK Screws, Nuts, Threaded Rods & Other Fastener Components are available from Professional Plastics.
PEEK is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.
-
PEEK Sheets & PEEK Rods - VIRGIN Grade
PEEK Sheets & PEEK Rods, UNFILLED, VIRGIN Grade PEEK (PolyEtherEtherKetone) is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame. PEEK is available from Professional Plastics locations in USA, Singapore & Taiwan.
We offer PEEK in Victrex PEEK®, Solvay KetaSpire®, and Degussa Vestakeep® brands.
- Victrex 450G® PEEK is produced exclusively by Victrex.
- KetaSpire® PEEK is produced exclusively by Solvay.
- Vestakeep® (D Resin) PEEK is produced exclusively by Evonik Degussa
-
PEEK Tubing - Convoluted
Convoluted PEEK Tubing has a maximum service temperature of 500°F (260°C) and offers excellent abrasion and wear resistance. PEEK tubes are also USP Class VI compliant, have excellent chemical resistance and are radiation resistant. Add these characteristics to the fact that PEEK tubes offer a superior strength to weight ratio and it becomes apparent why this product has continued to grow in demand over the last few years.
-
PEEK Tubing - Extruded
PEEK Tubing is available from Professional Plastics offers a variety of sizes. PEEK Tubing Products include Extruded Large Bore Tubing (aka hollow rod), Small Diameter Capillary Tubing, and Large Compression-Molded Tubes. Wall thicknesses vary as does the color, from a light amber when produced as a thin wall tube to a dark tan if manufactured with a heavier wall. Extruded tubes are typically produced in 8 foot (96" lengths) or 1 meter (39.4" lengths)
Extruded PEEK Tubing has a maximum service temperature of 500°F (260°C) and offers excellent abrasion and wear resistance. PEEK tubes are also USP Class VI compliant, have excellent chemical resistance and are radiation resistant. Add these characteristics to the fact that PEEK tubes offer a superior strength to weight ratio and it becomes apparent why this product has continued to grow in demand over the last few years.
- Additional Sizes Available. Contact Customer Service for details and pricing.
-
![PEEKshrink® Tubing]( "PEEKshrink® Tubing")
PEEKshrink® Tubing
PEEKshrink® Tubing secures performance of sensitive items in challenging environments. PEEK, a linear, semi-crystalline aromatic polymer, is considered the highest performing thermoplastic material due to its ability to withstand extreme temperatures, high pressure and caustic fluids. Now Zeus has taken PEEK to an entirely new level of performance with the introduction of PEEKshrink® — PEEK heat-shrinkable tubing. PEEKshrink® provides a "shrink to fit" layer of protection for sensitive or critical components used in a variety of applications such as medical devices, electronics, telecom hardware and oil exploration equipment. The polymer's inherent purity and lubricity make it an ideal choice for analytical and life sciences applications.
An alternative to traditional protective coatings like Teflon, PEEKshrink® is ideally suited for challenging environments where extreme heat or cold, intense pressure, chemicals, water, or dielectric interference pose a threat to wires and electrical components. When shrunk onto components, PEEKshrink® forms an impenetrable "second skin" that is impervious to contaminants, preserving the integrity and performance of whatever is inside.
PEEKshrink® Tubing Sample Applications:
- Electrical component covering
- Medical device protection
- Wire/cable encapsulation or insulation
- Impact and wear resistant insulation
Technical Notes:
- Ideal for shrinking on wire or round mandrels
- Shrink results can be achieved with a variety of heat shrink systems:
- IR Oven
- Convection Oven
- Heat Gun
-
PFA Rods & Sheets
PFA Rod and PFA Sheet
PerFluoroAlkoxy (PFA) offers similar properties to FEP, but PFA is preferred when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. PFA offers high melt strength, stability at high processing temperatures, excellent crack and stress resistance, a low coefficient of friction, and more than 10 times the Flex life of FEP. It has high resistance to creep and retention of properties after service at 500°F (260°C), with useful properties at -320°F (95°C). PFA also meets FDA 21CFR.177.1550.
- There is currently a Global Shortage of PFA Resin & Products - Please send your request ASAP & we will do our best to support your needs.
-
Phenolic - Grade C Canvas Sheets
Phenolic Canvas Grade C (machining grade) sheets for structural and mechanical applications. This laminated product utilizes a canvas base and phenolic resin binder. Grade C & CE canvas phenolic are made from a medium weave cotton cloth fabric and mixed with phenolic resins to provide good wear resistance, low moisture absorption, and good mechanical strength at economical cost.
Canvas-based phenolics are used for structural supports, piston rings, gears, spacers, and bearing surfaces.
-
Phenolic - Grade CE Canvas Sheets
CE Canvas Phenolic Sheet (Grade CE Canvas Electrical Grade) Sheets exhibit good mechanical and impact strength with continuous operating temperature of 250°F. This material is an excellent insulator and is used in various electrical and mechanical applications.
- CE stands for Canvas Electrical Grade.
-
Phenolic - Grade L - Linen Sheets
Phenolic - Grade L Linen is a fine weave (less than 4 ounce/square yard) cotton fabric commonly called linen, combined with phenolic resin to provide better machining than NP310. It is used for smaller and more intricate shapes than Grade C Canvas Phenolic. This products is also known Linen Phenolic, and Micarta L.
-
Phenolic - Grade LE Sheets
Phenolic Grade LE Linen Sheets provide good mechanical & electrical strength. Recommended for intricate high strength parts. Continuous operating temperature 250°F
- Electrical Grade Linen Phenolic Sheets & Rods per NEMA LE
-
Phenolic - Grade X Paper
Paper Phenolic Sheet (X-Grade Paper Phenolic) is manufactured from high strength paper bonded with a phenolic resin. The resulting material is a tough laminate with a high impact resistance, excellent tensile, compressive and flexural strengths.
- For better electrical properties consider CE or LE Phenolic.
- aka Micarta, Bakelite, Bakelita, Riser Plate, Tooling Plate and more
-
![Phenolic Mil-I-24768]( "Phenolic Mil-I-24768")
Phenolic Mil-I-24768
Mil-I-24768 - Military Specifications for Thermoset Laminates per Mil-I-24768
- Click Links Below for Pricing, Datasheets, and to Order Online
The following list indicates the military specifications for thermoset laminate materials:
- MIL-I-24768/1 (GME) Glass Melamine Laminate
- MIL-I-24768/2 (GEE) G-10 Glass Epoxy Laminate(non-brominated) Click to Order Online
- MIL-I-24768/3 (GEB) G-11 Glass Epoxy Laminate Click to Order Online
- MIL-I-24768/4 (GPO-1) Glass Polyester Laminate Click to Order Online
- MIL-I-24768/5 (GPO-2) Glass Polyester Laminate Click to Order Online
- MIL-I-24768/6 (GPO-3) Glass Polyester Laminate Click to Order Online
- MIL-I-24768/7 (GTE) Glass Teflon Laminate
- MIL-I-24768/8 (GMG) G-5 Glass Melamine Laminate Click to Order Online
- MIL-I-24768/9 (NPG) Nylon Fabric Phenolic Laminate Click to Order Online
- MIL-I-24768/10 (PBE) Paper Base XXX Phenolic Laminate Click to Order Online
- MIL-I-24768/11 (PBG) Paper Base XX Phenolic Laminate
- MIL-I-24768/12 (PBM) Paper Base X Phenolic Laminate Click to Order Online
- MIL-I-24768/13 (FBE) Cotton LE Phenolic Laminate Click to Order Online
- MIL-I-24768/14 (FBG) Cotton CE Phenolic Laminate Click to Order Online
- MIL-I-24768/15 (FBI) Cotton L Phenolic Laminate Click to Order Online
- MIL-I-24768/16 (FBM) Cotton C Phenolic Laminate Click to Order Online
- MIL-I-24768/17 (GSG) G-7 Glass Silicone Laminate Click to Order Online
- MIL-I-24768/18 (GPG) G-3 Glass Phenolic Laminate Click to Order Online
- MIL-I-24768/19 (PBM-P) Paper Phenolic Laminate
- MIL-I-24768/20 (PBM-PC) Paper Phenolic Laminate
- MIL-I-24768/21 (PBG-P) Paper Phenolic Laminate
- MIL-I-24768/22 (PBE-P) Paper Phenolic Laminate
- MIL-I-24768/23 (PBE-PC) Paper Phenolic Laminate
- MIL-I-24768/24 (PBM-PF) Paper Phenolic Laminate
- MIL-I-24768/25 (PBE-PCF) Paper Phenolic Laminate
- MIL-I-24768/26 (PEE) Paper Epoxy Laminate
- MIL-I-24768/27 (GEE-F) G-10/FR-4 Glass Epoxy Laminate Click to Order Online
- MIL-I-24768/28 (GEB-F) Glass Epoxy Laminate
-
Phenolic Rods - Grade CE Canvas
Canvas Phenolic Rods - Grade CE (Canvas Electrical Grade Rods) exhibit good mechanical and impact strength with continuous operating temperature of 250°F.
- CE stands for Canvas Electrical Grade.
-
![Phenolic Sheet - Overview & Links]( "Phenolic Sheet - Overview & Links")
Phenolic Sheet - Overview & Links
Phenolic sheet is a hard, dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with synthetic resin. These layers of laminations are usually of cellulose paper, cotton fabrics, synthetic yarn fabrics, glass fabrics or unwoven fabrics. When heat and pressure are applied to the layers, a chemical reaction (polymerization) transforms the layers into a high-pressure thermosetting industrial laminated phenolic sheet.
PAPER REINFORCED PHENOLIC
NEMA XX per MIL-I-24768 PBG
Normal electrical applications, moderate mechanical strength, continuous operating temperature of 250°F.
CANVAS REINFORCED PHENOLIC
NEMA C per MIL-I-24768 TYPE FBM
NEMA CE per MIL-I-24768 TYPE FBG
Good mechanical and impact strength with contiunuous operating temperature of 250°F.
LINEN REINFORCED PHENOLIC
NEMA L per MIL-I-24768 TYPE FBI
NEMA LE per MIL-I-24768 TYPE FEI
Good mechanical & electrical strength. Recommended for intricate high strength parts. Continuous operating temperature 250°F.
NYLON REINFORCED PHENOLIC
NEMA N-1 per MIL-I-24768 TYPE NPG
Superior electrical properties under humid conditions, fungus resistant, continuous operating temperature of 160°F.
-
Plastic Machining Video
Plastic Machining - Plastic Machined Parts from Professional Plastics.
Professional Plastics can provide precision cnc machined parts to your most exacting tolerance. We offer machining services on the widest variety of engineering thermoplastics, ceramics, and laminated thermoset materials.
Typical Materials that can be supplied in plastic machined parts include:
Vespel®, Torlon®, Ultem®, PEEK, Kynar® PVDF, Rulon®, Meldin®, UHMW, PVC, Delrin®, Nylon, PTFE, Techtron® PPS, Ertalyte® PET-P, G-10/FR-4, and Phenolic.
- We also offer machined parts from ceramics such as: Macor®, Boron Nitride, and Alumina.
- Professional Plastics is ISO9001 and AS9100D approved. Contact us for more details
-
Plastic Shim Stock - color coded
Plastic Shim Stock - color coded
Professional Plastics offers custom plastic shims, shim sets and washers in thicknesses from .0005" to 1". These plastic shims are fabricated out of a variety of plastic materials, including color-coded plastics, nylon, vinyl, acetate, polypropylene, polyester and polyethylene, to name a few.
Professional plastics offers Practi-Shim™ color-coded shim stock in sheets and roll stock.
Plastic shim stock is color-coded, so the user can tell the thickness at a glance.
- Practi-shim(TM) is a registered trademark of Accutrex Products Inc.
- Note: We also offer Kapton & Kaptrex brand polyimide film for aerospace shims.
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
