| Items Per Page:
Pages: 1 2 3
|
-
G-10/FR4 Sheet - ESd
G-10/FR4 ESd Sheet - This material offers high mechanical strength at room temperature. It exhibits good dielectric loss and electrical strength under both dry and humid conditions. In addition, it has flame resistance of at least Class I in accordance with NEMA test method 7.11.
- Designed to meet MIL STD 1686, this electro-static dissipative material can be supplied with a surface resistivity to any level from 105 to 1012 to meet customer specifications.
- USES- Intended for use in static sensitive electronic equipment.
-
Norplex NP510A G-10/FR4
NP510A (NEMA FR-4) combines a woven glass fabric and an epoxy resin laminate (Tg approximately 130°C) that contains bromine. The product provides consistent quality and good electrical properties under dry and humid conditions, as well as high flexural, impact, and bond strength at room temperatures. This product is suitable for a variety of structural, high humidity, and electrical insulation applications, which include terminal boards, lapping carriers, and disc and microelectronics polishing. NP510A complies with the requirements of MIL-I-24768/27 and IEC 60893-3-2-EP GC 202.
-
IPC 4101/21 - Unclad FR4
IPC 4101/21 - Unclad FR4 - See G-10/FR4 Page to Order Online.
IPC, in cooperation with DSCC, has developed an IPC specification for base materials for rigid and multilayer printed boards (IPC4101) that will effectively replace MIL-S-13949 and the IPC "L" series of specifications (L-108, L-109, L-112 and L-115). IPC4101 was released for publication in December 1997 as the replacement standard for both military and commercial purchases of laminate and prepreg. It contains much of the language used in MIL-S-13949, including the requirements in the familiar Group "A", "B", and "C" inspections.
-
G-10/FR-4 Sheets
G-10/FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass cloth material with an epoxy resin binder. It has characteristics of high strength, excellent electrical properties and chemical resistance not only at room temperature but also under humid or moist conditions.
- aka G10/FR4, G-10/FR4, FR4 Glass-Epoxy Laminate Sheets
- G-10/FR-4 glass epoxy laminate meets the specifications of Mil-I-24768/27
- G-10 & FR-4 also meet LP 509 & MIL P 18177 Type GEE
- Maximum Continuous Operating Temperature: 285°F
-
G-10/FR-4 Copper Clad Sheet
Copper Clad FR-4 - PCB Laminate Sheet
This flame retardant copper-clad laminate is made of continuous woven glass cloth impregnated with epoxy resin. The substrate is made of FR4 which is a flame retardant version of G-10 material. Copper Clad FR-4 Sheet is used to created printed circuit boards.
- .059" is most common thickness.
-
![G-10/FR-4 ESD Grade]( "G-10/FR-4 ESD Grade")
G-10/FR-4 ESD Grade
This break-through Electro-Static Dissipative material offers users a number of important advatages over other ESD products.
- The ESD material is an integral part of the G10/FR4 glass epoxy base.
- The surface resistivity can be supplied to the users specification.
- It offers improved machinability and tighter tolerances.
- Designed to meet MIL STD 1686.
While most ESD coatings are sprayed, painted or laminated to an insulating base, this product is physically part of the glass epoxy base. This eliminates the potential chipping, cracking or peeling. Also, there is no need for paint booths, paint chemicals and other potentially dangerous and costly equipment and materials.
Base Material is G10/FR4 -
This material offers high mechanical strength at room temperature. It exhibits good dielectric loss and electrical strength under both dry and humid conditions. In addition, it has flame resistance of at least Class I in accordance with NEMA test method 7.11.
ESD Properties:- Designed to meet MIL STD 1686, this electro-static dissipative material can be supplied with a surface resistivity to any level from 10*5 to 10*12 to meet customer specifications.
-
G-10/FR-4 Rods
G-10/FR-4 Rods (G10 Rods) are produced from woven glass fabric epoxy laminate sheets which are cut, turned & precision-ground into into rods. Engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. G-10/FR-4 material meets the standard specifications of G-10, but is also UL94V-0, (thus named G-10/FR4). All standard G-10 sold by Professional Plastics is supplied in the premium version of G-10/FR-4 which meets Mil-I-24768/27.
For Non-Brominated G-10, call customer service & specify "G-10, Non-Brominated to meet Mil-I-24768/2.
- Non-Brominated G-10 contains no halogens & is available as a Custom Order Only & is only rated as UL94-HB.
-
G-10/FR-4 Sheets - Sanded
G-10/FR-4 Sheets - Sanded
G-10/FR4 sheets can be sanded to close tolerances for precision requirments. This glass-epoxy laminate is abrasive, but precision sanded sheets are produced using double-disk sanders for your convenience. Please allow 2-5 weeks for sanded sheets.
G-10/FR-4 is a thermosetting industrial laminate consisting of a continuous filament glass cloth material with an epoxy resin binder. It has characteristics of high strength, excellent electrical properties and chemical resistance not only at room temperature but also under humid or moist conditions.
- G-10/FR-4 glass epoxy laminate meets the specifications of Mil-I-24768/27
- G-10 & FR-4 also meet LP 509 & MIL P 18177 Type GEE
-
G-10/FR-4 Tubes
G-10/FR-4 (G10) is a thermosetting industrial laminate consisting of a continuous filament glass cloth material with an epoxy resin binder. It has characteristics of high strength, excellent electrical properties and chemical resistance not only at room temperature but also under humid or moist conditions. G-10/FR4 epoxy laminate tubes are typically rolled over a mandrel to produce custom-wall thicknesses.
- G-10/FR-4 sheets meet the specifications of Mil-I-24768/27
- G-10/FR-4 also meet LP 509 & MIL P 18177 Type GEE
-
G-11/FR5 - NEMA Grade FR5
FR5 Glass-Cloth Reinforced Epoxy
NEMA grades G11 and FR5 Glass-Cloth Reinforced Epoxy - natural color is typically yellow green to amber. This grade is similar to G10/FR4 but has a higher operating temperature and superior mechanical properties at elevated temperatures. The main difference between NEMA Grades G11 and FR5 is that FR5 is a fire retardant grade of G11.
- Also sold under Norplex Grade MC511AF
-
G-10 Non-Brominated
NEMA Grade G10 materials are continuous filament woven fiberglass sheets bonded
with epoxy resin. The material has the ability to maintain excellent mechanical, electrical,
and physical properties at elevated temperature to 130C. NEMA G-10 is a non-brominated,
non-flame retardant grade of glass epoxy laminate.
- Non-Brominated G-10 meets Mil-I-24768/2.
- Non-Brominated G-10 contains no halogens & is available as a Custom Order Only & is only rated as UL94-HB.
-
G-11 Rod
G-11 Glass Epoxy Laminate (Mil-I-24768/3) is produced in high-temperature, laminated, glass-cloth sheets. It has high mechanical strength at temperatures up to 150°C, is self extinguishing, and retains 50% of its flexural strength at elevated temperatures. G-11 Rods are manufactured in both "Sheet Rod", which is manufactured by cutting laminated G-11 sheets into strips & the precision ground into rods. We also offer "Rolled & Molded" rods which are produced by rolling epoxy saturated G-11 glass cloth into rods and then pressed and cured into rod molds.
- Standard rods offered on this page are "sheet rods" unless otherwise stated.
-
G-11 Sheets
G-11 Glass Epoxy Laminate (Mil-I-24768/3) is produced in high-temperature, laminated, glass-cloth sheets, as well as, precision-ground rods and rolled and molded tubes. G-11 exhibits high mechanical strength at temperatures up to 150°C, is self extinguishing, and retains 50% of its flexural strength at elevated temperatures.
-
G-11 Tubes
G-11 Glass Epoxy Tubes are produced from high-temperature, laminated, glass-cloth and epoxy resin. This resulting product has high mechanical strength at temperatures up to 150°C, is self extinguishing, and retains 50% of its flexural strength at elevated temperatures. To manufacture G-11 laminated tubes, epoxy saturated glass cloth is rolled over a mandrel and cured. These tubes do not meet the Mil-I-24768/3, but they are made from the same base ingredients.
-
G-3 (NP-504) Glass-Phenolic Laminate
G-3 Glass-Phenolic Laminate (aka Micarta NP-504) - This woven glass fabric with high-temperature phenolic resin has excellent flexular, compressive, and impact strengths. G-3 can be used for seals, acid-resistant gaskets, oven internals, and various structural applications.
- Available in 36" x 48" Sheets or 48" x 96" Sheets (lead-time may apply).
- Call customer service for less than full-sheet requirements.
-
![G-30 Polyimide Glass Laminate (Norplex P95)]( "G-30 Polyimide Glass Laminate (Norplex P95)")
G-30 Polyimide Glass Laminate (Norplex P95)
G-30 polyimide glass laminate (aka Norplex P95 per NEMA GPY) is a high performance woven glass fabric bonded with polyimide resin. Specially developed to provide engineers with a plastics material capable of continuous long term use at 500°F and higher. Possesses excellent dimensional stability, mechanical and electrical properties which are well maintained at elevated temperatures. Has machining characteristics similar to Grades G10 and G11. G30 (aka Norplex P95-GPY) consists of woven glass fabric with polyimide resin. The product is engineered to maintain excellent physical properties at 240°C, making it suitable for high-temperature applications. It offers a low coefficient of thermal expansion, as well as high mechanical strength and consistent quality. It can be used for structural components, thermal insulators, PCB manufacture and assembly, and high-temperature gaskets in petrochemical plants. P95 complies with the requirements of IEC 60893-3-7-PI GC 301.
-
G-5 Glass-Melamine Laminate
G-5 Glass-Melamine Laminate - This woven glass fabric is very hard, flame resistant, and machining grade with excellent electrical properties in high humidity conditions. It has high physical strength and excellent arc resistance. Produced in Sheets, Rods and Tubes to customer specifications.
-
![G-7 Glass-Silicone Laminate]( "G-7 Glass-Silicone Laminate")
G-7 Glass-Silicone Laminate
G-7 glass-silicon laminate has good electrical properties under humid conditions, excellent heat and arc resistance, and is self-extinguishing. G-7 is used for electrical grade insulation, and for heating & appliance insulation. Silicone laminate grade G7 glass cloth reinforced silicone's natural color is typically cream to white. Composed of a continuous glass woven cloth base impregnates with silicone resin binder, this grade has excellent heat and arc resistance. Silicone thermosets are among the best polymers for high temperature. Hence, silicone is broadly used for high temperature electronic applications requiring low electrical losses. Silicone is not as strong as epoxies and industrial laminates (phenolics), upon aging at lower temperatures but is stronger upon aging over 400 deg F. G7 has extremely good dielectric loss properties under dry conditions and good electrical properties under humid conditions, although the percentage of change is high.
-
G-9 Glass-Melamine Laminate
G-9 Glass-Melamine Laminate is a woven glass fabric that is very hard, flame resistant, and machining grade with excellent electrical properties in high humidity conditions. It has high physical strength and excellent arc resistance. G-9 Glass-Melamine Laminate is produced in sheets, rods and tubes to customer specifications.
-
NP500A (NEMA G-10)
Norplex NP500A - It (NEMA G-10) is a glass fabric combined with a halogen-free epoxy resin system. The product offers a combination of excellent electrical characteristics and superior physical properties. In addition, it is not flame retardant and meets NEMA G-10 requirements. NP500A is used for structural support and insulation properties. It is also suitable for pipe shoes and vacuum applications. NP500A complies with the requirements of MIL-I-24768/2, Type GEE, and IPC 4101, sheet 20.
| Items Per Page:
Pages: 1 2 3
|
|
Contact Us
Locations
About Us
Track Shipment
Register
Log In
