Semitron® 420은 미국, 싱가포르 및 대만 창고에 보관되어 있습니다. Semitron ESd 420 정적 분산 PEI는 고온 응용 분야에서 사용되는 유일한 진정한 분산 플라스틱 제품입니다. 이 소재는 정전기 분산, 낮은 팽창 계수, 높은 강도 및 내열성을 포함하는 고유한 특성 조합을 제공하며 벗겨지지 않습니다. ESd 420은 550,000psi의 인장 계수, 420°F의 열 변형 온도(264psi에서) 및 106~109ohms /square(W/sq.)의 중간 범위에 있는 표면 저항을 갖습니다.
기계 가공을 위한 Semitron 스톡 형상은 반도체 장치 제조용 장비에서 실리콘 웨이퍼 및 장치를 취급하기 위한 고정 장치를 만드는 데 이상적입니다.
Semitron 420은 미국, 싱가포르 및 대만 창고에 보관되어 있습니다. Semitron® ESd 420은 또한 하드 드라이브 제조 및 조립 공정에서 부품을 취급하는 장비에 사용하기에 이상적입니다. Semitron® ESd 420은 열팽창 계수가 낮고 압축 강도가 높으며 내마모성이 우수합니다. MCAM-Quadrant Semitron® ESd 420 형상은 잔류 응력이 매우 낮으므로 결과적으로 매우 평평하고 매우 엄격한 공차로 가공할 수 있습니다. 아마도 가장 중요한 것은 Semitron® ESd 420이 벗겨지지 않는다는 것입니다. 결과적으로 이러한 취급 응용 분야에서 미립자가 크게 발생하지 않습니다. 민감한 전자 부품을 취급하기 위한 웨이퍼 콤 및 기타 부품은 소멸성이어야 합니다. 더 중요한 것은 제어된 방식으로 정전기를 방전할 수 있어야 한다는 것입니다. 제어되지 않은 방전 이벤트는 제품 손상으로 이어질 수 있습니다. 표면 저항이 10 6 ~ 10 9 Ohms/sq.인 Semitron® ESd 420은 이러한 응용 분야에 사용하기에 이상적입니다. Semitron 420은 안정적인 ESd 성능과 결합하여 웨이퍼 빗 및 기타 취급 구성 요소에 대한 모든 물리적 성능 요구 사항을 안정적으로 충족합니다.
Semitron® ESd 420의 기능 및 이점 - ESd PEI (ULTEM)
Semitron 420 - Semitron ESd 420은 다음을 제공합니다.
우수한 웨이퍼 취급 및 테스트 재료
표면 저항률: 10 6 - 10 9 ohms/sq.
최대 420°F의 온도에서 높은 강도와 강성을 유지합니다.
IC 테스트 소켓, 네스트 및 핸들러용으로 설계
Semitron 420은 미국, 싱가포르 및 대만 창고에 보관되어 있습니다.
싱가포르 창고는 말레이시아, 필리핀, 태국 및 아시아 전역의 고객에게 서비스를 제공합니다.
These Terms of Use govern your conduct associated with the Customer Ratings and Review service offered by Professional Plastics (the "CRR Service"). To the extent of any conflict
between Professional Plastics' Privacy Policy and these Terms of Use, these Terms of Use shall control with respect to the Customer Ratings & Reviews.
By submitting any content to Professional Plastics, you represent and warrant that:
you are the sole author and owner of the intellectual property rights thereto
all "moral rights" that you may have in such content have been voluntarily waived by you
all content that you post is accurate
you are at least 18 years old
use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
You further agree and warrant that you shall not submit any content:
that is known by you to be false, inaccurate or misleading;
that infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
that violates any law, statute, ordinance or regulation (including, but not limited to, those governing export control, consumer protection, unfair competition, anti-discrimination or false advertising)
that is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully
harassing to any individual, partnership or corporation
for which you were compensated or granted any consideration by any third party
that includes any information that references other websites, addresses, email addresses, contact information or phone numbers
that contains any computer viruses, worms or other potentially damaging computer programs or files.
You agree to indemnify and hold Professional Plastics (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.
For any content that you submit, you grant Professional Plastics a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you.
All content that you submit may be used at Professional Plastics's sole discretion. Professional Plastics reserves the right to change, condense or delete any content on Professional Plastics' website that Professional Plastics deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use. Professional Plastics does not guarantee that you will have any recourse through Professional Plastics to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Professional Plastics reserves the right to remove or to refuse to post any submission for any reason. You acknowledge that you, not Professional Plastics, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Professional Plastics, its agents, subsidiaries, affiliates, partners or third party service providers and their respective directors, officers and employees.
Professional Plastics may require you to provide certain information or data in order to submit a review. By submitting a review, you agree and consent to Professional Plastics' promotional use and display (whether online or offline) of all such information or data you provide with, or as part of, your review (including, but not limited to, any name, user name, screen name or other identifier, and any age, location, or other personal information you choose to provide).
07/13/2023
David
Austin, TX
Perfect material for our application.
02/06/2023
Frank
Edgewood, MD
Very good product. cut to exactly how I wanted it. also a very reasonable price. very pleased with the product and the gentlemen who helped me order it.
01/26/2023
Jason
Plano, TX
Fast turn around.. excellency quality. Will definitely order from again.
View In English
문의
위치
회사 소개
배송 추적
회원 가입
로그인
Translate