plastic supplier, plastic sheet, plastic rods, plastic tubing, plexiglass, store Professional Plastics sells Plastic Sheet, Plastic Rod, Plastic Tubing and Plastic Film and materials for any industry
Professional Plastics Locations
Account Account Shopping Cart Shopping Cart
About Us       Careers       Locations      Contact Us

HomeSearch Results - HOSE

SEARCH RESULTS - HOSE
 
Over 200 types of plastic hose or tubing for any project or application.

Search:
Your search returned:
239 matches for Products

Items Per Page:   Pages:  1  2  3  4  5  6  7  8  9  10  11  12

    • Air-Tak Coupled Air Hoses are made in the USA using Premium Reinforced PVC.
    • Available: In 1/4" and 3/8" I.D. Sizes with 1/4" Brass Fittings on both ends (more sizes available on request)
    • Stocked: In Standard Coil Lengths of 25, 50 and 100 Feet
    • Colors: Choices of Patriot Red, Signal Yellow and George Washington Blue
    • Available for Shipment within 5-7 business days.
    • Large and Small Quantities are welcome.
    • VINYL CONTRACTOR HOSE CLW SERIES
      Reinforced Vinyl Hose manufactured to be on the job in heavy-duty applications with contractors, growers, equipment operators as well as for industrial applications. Standard print reads: CLW 150 PSI MADE IN THE USA.
      Construction:
      Polyvinyl Chloride - inner and outer tube - with polyester textile yarn reinforcement.
      Operating Temperature Range:
      -20 F to +150 F. (Higher temperatures lower working pressures.)
      Recommended Couplings:
      Standard shank fitting with ferrule or clamps used on rubber hose.
      Colors: Red is stock. Call factory for other available colors.
      PART # - I.D. - O.D. - WORKING PSI AT 70°F - LENGTH - LBS/CFT
    • CLW-R0580 - 5/8" - .875" - 150 lbs - 300 ft - 15.5
    • CLW-R0340 - 3/4" - 1.045" - 150 lbs - 300 ft - 21.8
    • Silbrade® Braid Reinforced Silicone Hose
      The construction of SILBRADE enables silicone tubing to handle increased pressure applications. SILBRADE offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of SILBRADE allows excellent bend radii and permits installation in restricted spaces without impeding flow. SILBRADE, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures.
    • SILBRADE is not recommended for implantable or in-body uses or for continuous steam applications.

      SILBRADE may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced

      Applications: - Adhesive Lines • Beverage Service • Bottle Filling • Chemical Feeds • Deionized Water Transfer • Fermenter Lines • Hot Fill Lines • Food Handling • Laboratory • Resin Feeds • Stirring Vessels • Brewery Beer Hose Lines • Viscous Material Handling
    • Beer and Wine Beverage Grade Butyl Hose for Suction & Discharge Applications.
    • Ultra smooth, white, chlorobutyl rubber liner offers high purity and allows unrestricted flow; minimizing entrapment and blockage concerns
    • Microbe-resistant liner is built on stainless steel mandrels for cleanliness and will not impart taste or odor
    • Meets FDA and Canadian Food Inspection Agency (file: N267) standards
    • Animal derived component freeButyl compound used is free of animal-derived ingredients
    • Multi-layered and reinforced with a helix wire, making it ideal for suction and discharge applications
    • Rated for full vacuum (29.9 in./Hg.)
    • Works best in non-oily beverage and food applications including potable water, beer, wine, and juices
    • Available in bulk quantities or as complete hose assemblies
    • Offered with standard BPE Stainless Steel Tri-Clamp® fittings, collars and clamps
    • Clean In Place to 248°F (120°C). Not intended for continuous steam service.
    • Newflex® Spiral Reinforced PVC Suction Hose - NEWFLEX reinforced suction hose is widely used throughout industry for both positive and negative pressure applications. Its advanced design allows the use of light-weight, corrosion-resistant PVC to replace bulkier and heavier plywrapped rubber hose.

      NEWFLEX series 'FH' and 'FHS' are clear, allowing the user to have full visual contact with the flow of material inside. The Food Grade lines are made from FDA-approved ingredients suitable for food and beverage handling. The smooth interior is easily sterilized and cleaned. Both types have a vacuum rating of 28 in./Hg. NEWFLEX series 'VFH' is produced from a clear FDA core with an industrial grade white helix, which is not exposed to the hose I.D. It can handle light-duty pressure discharge, gravity feed, and moderate vacuum applications.
    • Food & Dairy Beverage Grade Nitrile Hose for Suction & Discharge Applications.
    • Ultra smooth, white, nitrile rubber inner surface offers high purity and allows unrestricted flow, minimizing entrapment and blockage concerns
    • Microbe-resistant liner is built on stainless steel mandrels for cleanliness and will not impart taste or odor.
    • Meets FDA, USDA and Canadian Food Inspection Agency (file: N267) standards
    • Animal derived component free - Nitrile compound used is free of animal-derived ingredients
    • More flexible than other rubber food and beverage hoses of similar construction
    • Abrasion-resistant nitrile compound cover is lightweight yet durable
    • Multi-layered and reinforced with a wire helix, making it ideal for suction applications or discharge applications such as tank cleaning
    • Rated for full vacuum (29.9 in./Hg.)
    • Odorless and tasteless, making it suitable for a wide variety of food and beverage applications including potable water, non-alcoholic beverages, juices, oily/fatty or dry bulk foods, milk, and dairy products
    • Available in bulk quantities or as complete hose assemblies
    • Offered in a range of popular sizes
    • Clean In Place to 248°F (120°C). Not intended for continuous steam service.
    • Offered with standard BPE Stainless Steel Tri-Clamps®, male and female cams, fittings, collars and clamps
    • Wegener Autotherm Welder - Plastic Welding Equipment
      The Autotherm is an electronically controlled temperature regulated plastic hot-air welding tool that provides the highest quality welding environment. At the back of the handle is a dial with temperature scale which allows for precise setting of welding temperature. A blinking LED signals to the operator that the set temperature has been achieved. Power surges, air volume changes and intake variations are automatically compensated for. The heating element life is vastly extended since thermal overload is no longer possible. Supplied with a 120 VAC, 800W heating element, the Autotherm is suitable for use with clean air sources or inert gasses (N2).
    • Requires 35 liter/minute (1.2 CFM) of air/gas flow.
    • Wegener Duratherm hot air welding gun features an electronic output control incorporated in the handle to ensure continuous adjustment of the welding air temperature without alteration of air volume. Duratherm standard features include: control board with built-in sensor to prevent heating element burn-outs, temperature adjustable from ambient to 1200°F to accommodate all types of thermoplastic materials, insulating tube for protection of element, back plate can be rotated 360°.
    • Includes 120V/1000W heating element. Suitable for connection to blower model DT 1 or DT 2.
    • Power Supply: 120V (230V available upon request)
    • Power Consumption: 1000W
    • Air Requirement: 60 l/m (2.1 cfm)
    • Flx-Thane SD Tubing (ESd Polyurethane Hose) from Flexaust is a Medium weight black or clear static dissipative polyurethane hose reinforced with a bronze coated spring steel wire helix.
    • Braided PET Sleeving - Flexo PET - Versatile Bundling & Protection Solution
      The FLEXO PET grade is used in electronics, automotive, marine and industrial wire harnessing applications where cost efficiency and durability are critical. The unique braided construction and wide expandability allows quick and easy installation over large connectors and long runs. PT can be found in applications ranging from small office/home office to high tech wire and cable harnesses. The wide range of available colors and sizes allows easy and systematic color coding in complex wiring and cabling schemes.

      PET sleeving is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns. The material has a wide operating temperature range, is resistant to chemical degradation, UV radiation, and abrasion. The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.
    • CHEMFLUOR® FEP Tubing is a fluoropolymer with excellent physical and chemical properties. It can withstand low cryogenic temperatures, and has low porosity and low permeation. Chemically inert at extreme temperatures, Chemfluor® FEP can operate in temperatures ranging from -100°F to 400°F. The material's transparency and weatherability make it ideal for use in sight gauges, especially when used with harsh chemicals.

      Typical Applications: - Sight Gauges - Valve & Pump Linings - Hose & Pipe Liners - Fluid Handling - Pharmaceutical Tubing
    • Coiltef™ Coiled FEP Tubing - Almost totally inert, COILTEF can be used with all industrial solvents, chemicals, and corrosive materials even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. Fluoropolymer's non-stick property allows transport of viscous, sticky material without line clogging. It also offers outstanding aging resistance. COILTEF is manufactured through a fabrication process which heat sets the coils. The coils should remain stable up to 200° F. At higher temperatures the coils will begin to relax and lose their set. If the application involves elevated temperatures, in-house testing is recommended. COILTEF may be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. Care should be taken with steam sterilization of COILTEF to prevent coil relaxation. Testing is recommended. COILTEF can be manufactured from .085" to 1/2" tubing ID. The coil diameter can be produced from 3/4" OD to 4" OD.

      APPLICATIONS:
      Chemical Hose - Deionized Water Transfer - Dispensing Systems - Laboratory - Medical - Paint Spray - Pure Air & Water Systems - Robotics
    • Excelon RNT 68 Food and Beverage Hose (PVC Vinyl Hose/Tubing)
    • PVC Food Grade Tube for a Variety of Applications
      Approved by the FDA, USDA, UL, and more, Excelon RNT Food and Beverage Hose is the perfect choice for a number of food grade applications. It is suitable for use with liquids, semi-liquids, and gases, and its clear plastic design allows for easy flow monitoring. Easy to clean, even up to the stringent standards of food and beverage processing, this food grade PVC tubing can be sterilized with both gas and radiation, and can be flushed with most sanitizers and cleaners.

      Its flexibility, combined with availability in multiple, twin, and strippable-bore configurations allow for fast, easy, and organized installation, and it can also be used with a variety of clamps or barbed style fittings for even greater versatility. In addition to the clear plastic configuration, RNT Food and Beverage Hose can be custom run in colors; please contact our customer service department with your requirements.
    • Nomex Braided Sleeving - Soft, Pliable Flame Protection to 662°F
      Woven Nomex clothing and protective gear has been used for years by race car drivers, fire departments and oil rig personnel to provide that extra level of protection from the dangers that come with working in and around intense flame and heat. Our Nomex sleeving will do the same for your wires, hoses and cables. Nomex will protect your application in temperatures up to 662°F. It is unaffected by short term exposure to most acids, bases, solvents and common engineering chemicals. Despite the soft touch and smooth appearance associated with woven aramid fibers, Nomex is incredibly strong, with a tensile strength of 90,000 psi. The densely braided sleeving provides full coverage and protection on even the most exposed applications.

      Nomex braided sleeving cuts easily with regular scissors and the smooth surface eases installation even over long wire runs.
    • Nylon Tubing - Flexible & Semi-Flexible
      Nylon 6, 6/6, 11, 12 tubing is used in applications requiring good abrasion resistance, stiffness and strength at high temperatures. Manufactured from engineering resin, its applications include hydraulic hoses, robotics, and vacuum, fuel, vapor, air and brake lines. Nylon 11 and 12 may be used in situations warranting flexibility. Our Nylon 6, 6/6 tubing meets FDA requirements. Clear Nylon and Metric Sizes also available.

      Colors:
    • Natural - Standard
    • Black - The color black is good for improved durability in direct sunlight and outdoor exposure.
    • Blue- Only Available in Flexible Nylon Type 12 Tubing.
    • Clear- Only Available in Flexible Nylon Type 6 (metric and standard)

      Coil Lengths (see size chart for details):
    • 100' (*)
    • 250' (x)
    • 500' (y)
    • Cut pieces, special lengths and other colors on custom basis.
    • Braided Polyurethane Tubing (sold under the brand name Urebrade®) is a Braid Reinforced Polyurethane Hose (PUR - PU Hose). Where applications involve repeated flexing, heavy vibration, or abrasion, Braided Polyurethane Tubing offers superior service life over other materials. Polyurethane tubing (also know as PUR hose) is supplied in an ether formulation, making it resistant to attack from moisture and fungi. Polyurethane tubing also resists attack from ultra-violet rays making it a good material for outside use. The compound used in Urebrade Polyurethane tubing is listed by the National Sanitation Foundation (NSF 61).

      Applications:
      Abrasive Powder Transfer - Agricultural Lines - Air Tools - Cement Slurries - Granular Transfer - Hydraulic Lines - Lubricated Air Feeds - Lubrication Lines - Nuclear Power Facilities - Oil & Fuel Lines - Petroleum Products Transfer - Robotics - Transfer Lines for Clean Liquids - Transfer Lines for Internal Contamination Fluids - Well Pipe & Cable Jacket

      Physical Properties:
    • Max. Operating Temperature 175° F
    • Brittle Temperature -90° F
    • Hardness, Shore A ±5 85
    • Tensile Strength, psi 5500
    • Elongation at Break, % 580
    • Sani-Tech® STHT™-R platinum-cured braid-reinforced silicone hose is an ultra-flexible, high-purity hose that was developed for higher-pressure applications. Sani-Tech® STHT™-R is manufactured with Sani-Tech® 65 custom-brand silicone resin. Sani-Tech® STHT™-R hose resists temperature extremes, ozone, radiation, moisture, compression sets, weathering and chemical attack and imparts no taste or odors to fluids transported within it. Sani-Tech® STHT™-R hose withstands repeated autoclaving and sterilization and resists the adherence of blood products and other sanitary fluids.
    • Spiral cut tubing is available from Professional Plastics. This plastic tubing is spirally cut to create an expandable cable harness. It is available in a wide variety of materials and sizes.
    • Polyethylene Spiral Cut Tubing - Ideal for general applications, this lowcost material is highly abrasion resistant and is not affected by most solvents. Also available in Ultraviolet Resistant Black (for outdoor use), and many colors.
    • Fire-Resistant Polyethylene Spiral Cut Tubing - Suitable for applications requiring a self-extinguishing material that costs less than Nylon or TFE.
    • Nylon Spiral Cut Tubing - Nylon is self-extinguishing and does not produce any toxic or irritating byproducts, even when exposed to an open flame or excessive operating temperatures. Recommended for use in enclosed environments where the possibility of fire exists, this material is also lightweight, highly abrasion-resistant and operates over a wide temperature range. Also available in Black for outdoor use.
    • TFE Teflon Spiral Cut Tubing - features the widest operating temperature range of any material and can be used from -450° F to +500° F. Chemically inert and non-flammable, it is also available in black and a wide selection of colors.
    • Tygon® 3370 I.B. braid-reinforced, platinum-cured silicone hose is an ultra-flexible, high-purity hose that was developed for higher-pressure applications. TYGON® 3370 I.B. is manufactured with a biopharmaceutical-grade silicone resin, resists temperature extremes, ozone, radiation, moisture, compression sets, weathering and chemical attack, and imparts no taste or odors to fluids transported within it. TYGON® 3370 I.B. hose withstands repeated autoclaving and sterilization and resists the adherence of blood products and sanitary fluids.

      Typical Applications:
    • Load cell - Pump applications - Cell cultures - Vessel or tank transfer - Laboratory use
    • Steel Wire Reinforced PVC Suction Hose
    • Spiral steel wire reinforcement incorporated within the wall of flexible PVC tubing
    • Made from non-toxic ingredients conforming to FDA standards
    • Kink and crush resistant
    • Handles pressure and full vacuum (29.9 in./Hg.) applications
    • Glass-like clarity with mirror-smooth surfaces provide outstanding visual flow characteristics
    • Lightweight (compared to rubber hose) yet tough and abrasion resistant


Items Per Page:   Pages:  1  2  3  4  5  6  7  8  9  10  11  12
  Privacy Policy | Terms and Conditions | Site Map | Contact Us | About Us | Our History

Need More Help? Call us 1-888-995-7767

©Copyright 2017, Professional Plastics All Rights Reserved