plastic supplier, plastic sheet, plastic rods, plastic tubing, plexiglass, store Professional Plastics sells Plastic Sheet, Plastic Rod, Plastic Tubing and Plastic Film and materials for any industry
Professional Plastics Locations
Account Account Shopping Cart Shopping Cart
Careers       Locations      Contact Us

HomeSearch Results - PARTS

SEARCH RESULTS - PARTS
 
Advanced plastic parts such as screws, rings, guides and custom made parts for your application.

Search:
Your search returned:
135 matches for Products

Items Per Page:   Pages:  1  2  3  4  5  6  7

    • Vespel ® Rings & assorted Vespel Parts are high-performance polyimide shapes for the world's most demanding applications. Dupont Vespel offers a broad combination of temperature resistance, chemical resistance, mechanical toughness, natural lubricity,wear-resistance and insulation properties. Parts made from DuPont Vespel SP-1 provide operating temperatures from cryogenic to 300°C (570°F), great plasma resistance, plus a UL rating for minimal electrical and thermal conductivity.
      Vespel ® SP-1 is the unfilled base resin grade. SP-1 provides maximum physical strength, elongation, and toughness as well as the best electrical and thermal insulation values.

      Professional Plastics stocks a complete inventory of Dupont Vespel Rods, Plates, Tubes, Rings & Bars. We offer Vespel Parts made into Screws, Rings & other Parts to match your print specification. Professional Plastics operated 15 stocking locations in the USA & Asia. Locations in California, Texas, New York, Washington, Arizona, Utah, Colorado, Oregon, Ohio, Montana & Singapore. Sales offices in Taiwan & Austria.

      Vespel is used in a wide variety of applications in Aerospace, Semiconductor, Transportation, Petrochemical and other industries. Applications include screws, clamping rings, retaining rings, thrust washers, torch tips, seal rings, transmission components and more.

      Professional Plastics offers all materials as independent supplier and makes no claim regarding the suitability of any material to any particular application. It is the responsibility of the customer to select and test each material to determine the suitability for their specific application. Professional Plastics offers materials and information as an independent supplier.
    • CNC routed parts are available from Professional Plastics. Let our skilled operators provide you with a finished part to your specifications. We can provide high-quality routed parts from our KOMO CNC Router. All of our cnc operators have received factory-training & certification.

      Examples include: Acrylic & Polycarbonate disks & circular parts for Table Tops, Displays, Sight Glasses, Instrument Covers & other Optical Components.
    • We can also produce parts from engineering plastics such as Nylon, Delrin, ABS, Phenolics and more. This would include items such as; Bearing & Wear Pads, Insulation Blocks & other FLAT ROUTED PARTS.
    • Plastic Parts - CNC Machined.
      Professional Plastics and it's partners can provide precision turn-key plastic parts to your specifications. We offer the widest variety of high-performance engineering plastics in the industry and have a well-established record as a quality supply partner to companies in the aerospace and semiconductor industries. Precision manufactured pastic parts are available from more than 500 different materials including thermoplastics, thermoset laminates and composites and cermic materials.

    • For a competitive price & fast turn-around, E-mail or Fax us your CAD drawing of your cnc plastic parts now.
    • E-Mail: sales@proplas.com Phone (888) 995-7767 or Fax (866) 776-7527

      Parts include: Bearings, Sheaves, Washers, Thrust Washers, Guide Rails, Machine Guards, Wear Pads, Clamping Rings, Retaining Rings, Screws, Sliders, Bumpers, Rollers, Splines, Insulators, Lantern Rings, Nests, Sockets, Manifolds, Valves, Clamps, Seal Rings, Valve Seats, Layrinth Seals, Wear Rings, Seals, Mandrels, Connectors, Spur Gears and more.

      Don't know what material to use ? - Try our Material Design Tool - Sortable Material Data Sheets.
    • Vespel® SP-1 is used to produce a wide range of OEM & aftermarket consumable parts used in the semiconductor industry. Professional Plastics is a supplier of Vespel ® polyimide shapes and parts with locations in the USA, Singapore & Taiwan.
    • ABS Sheet (General Purpose ABS Sheets) is offered by Professional Plastics in a wide range colors & grades. Sheets are produced in monolayer and co-extruded multilayer. Stocked in Standard Black and White with Hair Cell Finish on 1 Side. Custom colors also available. Custom formulations can be combined to provide performance an cost saving options such as Virgin Cap + Utility Base, Low Gloss (matte) Cap + Utility Base, and Custom Color Cap + Utility Base.
    • Standard Finish is Hair Cell 1 Side (Textured 1 Side, Smooth 1 Side)
    • General Purpose Forming Grade ABS Sheet is Durable and Easily Vacuum-Formed
    • Armor-X™ Sheet from Quadrant EPP
      Protect equipment and surfaces with Armor-X™. Armor-X's™ non-marring, cushioned surface shields critical surfaces and heavy, expensive parts and equipment, including stainless steel, from gouges and scratches. From work surfaces to flooring, Armor-X™ helps protect your investment.

      Applications Include: Bench Tops - Bumper Pads - Machine Shop Flooring - Storage Bins

      Armor-X™ is available in:
    • 4' x 10' sheets (1220mm x 3050mm)— 1/4"-1 1/2" thick

      Armor-X™ w/ ProKnob™, (AS SHOWN) a knobbed, anti-skid surface designed to keep valuable parts from moving, is available in:
    • 4' x 8' sheets (1220mm x 2440mm) — 3/8"-1 1/2" thick*
    • 4' x 10' sheets (1220mm x 3050mm)— 3/8"-1" thick*
      *thickness refers to base and does not include the height of the knobs
    • Techtron® PPS CMP Retaining rings used in CMP machines utilize high-purity & long-wearing Techtron PPS.

      PPS Retaining rings that hold 300 mm semiconductor wafers during chemical mechanical planarization (CMP) must withstand repeated exposure to harsh chemicals and abrasives. One way that semiconductor fabricators gain the stiffness, purity and toughness needed in CMP rings is to use rings machined from Techtron® PPS. These shapes are made from a proprietary grade of Fortron® polyphenylene sulfide (PPS).

      Techtron® PPS shapes extend ring life significantly compared to acetal, polyester and generic PPS. Process experience shows that rings made from Techtron® PPS stock shapes withstand 2,000 to 5,000 CMP cycles compared to 1,000 to 2,000 cycles for rings made of these other generic PPS materials.

      In CMP, a layer of silicon dioxide, aluminum, copper or other material on a semiconductor wafer is polished to an exacting flatness before circuitry is etched on it. The slurry used varies in abrasiveness and pH depending on the surface material. During CMP, a polishing pad rotates against a wafer mounted on a ceramic base and held in a retaining ring. In addition to withstanding the polishing compound, the ring must be dimensionally stable and cannot flex during polishing.

      Techtron® PPS blanks are 12- to 24-in.-long tubes that are machined into retaining rings varying in height from 0.33 to 1.0 in. The 12-inch-diameter rings (I.D.) used with 300 mm wafers have wall thicknesses of 0.375 to 2.5 in. The Techtron® PPS used for ring blanks is a high-toughness grade that reduces chipping and breaking and has a tensile elongation of up to 25 percent.
    • Delrin® 570, this grade has 20% glass fiber filler. It has much greater mechanical properties over unfilled acetals.

      Delrin® Glass Filled provides the same basic properties as Delrin®, with added strength. Delrin® Glass Filled is a tough material that provides the added advantages of greater stiffness, improved creep resistance, low warpage and higher dimensional stability than Delrin® because it possesses surface characteristics of Teflon®. Parts designed using glass-filled will demonstrate good impact resistance, low deformation under load and high fatigue endurance. Delrin® Glass Filled is an excellent choice for its long-term mechanical stability in applications such as Anti-Friction Parts, Application Bearings, Gears and Parts requiring greater stiffness, Electrical Components and other Close Tolerance Precision Parts and Fuel System Parts.
      Note: This item is NOT a standard stock item. Minimum order & lead-time may apply.
    • Delrin® AF Blend (Delrin® AF Blend with13% PTFE [Standard Grade] ) Delrin AF Blend is a unique thermoplastic material for use in moving parts in which low friction and long wear life are important. It is a combination of PTFE fibers uniformly dispersed in Delrin® acetal resin.
    • Delrin® AF Blend typically includes 13% PTFE Fibre-Filled
    • LF-13 is always a 13% PTFE Powder-Filled.
    • Also available in Full-Strength Delrin 100AF - 20% PTFE on a Custom Order Basis.
    • DE588 is a Delrin® 100AF fully-certified for US Naval Specifications.
    • Ertalyte® PET-P is an unreinforced, semi-crystalline thermoplastic polyester characterized as having the best dimensional stability coupled with excellent wear resistance, a low coefficient of friction, high strength, and resistance to moderately acidic solutions. Ertalyte® is capable of sustaining high loads and enduring wear conditions. Ertalyte® PET-P offers good chemical and abrasion resistance. Its low moisture absorption enables mechanical and electrical properties to remain virtually unaffected by moisture.

      Also Consider Ertalyte TX - Ertalyte® TX is an internally lubricated version of PET-P, providing enhanced wear and inertness over general purpose nylons or acetals.
    • High Molecular Weight Polyethylene / HMW PE 500 grade is very extensively used as a wear or abrasion resistant component on conveyors, chutes, troughs, tension bars and liners. Being lightly 'softer' than UHMW, HMW PE is often specified for cutting boards because it does not blunt the knives as quickly and is food approved. HMW (PE 500 aka HD 500) polyethylene has a density 500,000 g/mol, compared with 300,000 g/mol for standard HDPE or 1,000,000 g/mol for UHMW. HMW PE 500 exhibits a good combination of stiffness, toughness, mechanical damping ability with wear & abrasion resistance.

      Typical applications of High Molecular Weight Polyethylene 500 grade: for use with food contact particularly trap and preparation surfaces (food boards, butchers blocks, food machinery/production parts, dough scrapers, food board racking, catering display)
    • It is readily available in many colors.
      Supplied as High Molecular Weight Polyethylene sheets, High Molecular Weight Polyethylene plastic parts precision engineered to your specifications, chopping boards and butchers block.
    • PCTFE (Kel-F) fasteners includes screws, bolts, thumb screws, cap screws, nuts, washers, spacers, shoulder bushings, screw insulators, threaded rod and many other PCTFE items. PCTFE parts are manufactured to ANSI and DIN standards.

      Kel-F - PCTFE (PolyChloroTriFluoroEthylene) Kel F is a fluorocarbon-based polymer and is commonly abbreviated PCTFE. PCTFE offers the unique combination of physical and mechanical properties, nonflammability, chemical resistance, near zero moisture absorption, and excellent electrical properties. These characteristics cannot be found in any other thermoplastic fluoropolymer with a useful temperature range of -400°F to +400°F. PCTFE also has extremely low outgassing, making it well suited for use in aerospace and flight applications.
    • Custom prints for Kel-F PTCFE fasteners and components can be sent in all standard formats.
    • Kel-F (PCTFE) parts are used in the Semiconductor, Aerospace, Chemical and Electronics Instries.
    • Kydex® 100 High-Impact Fire Rated Sheet: - Aircraft Approved
      Super tough, durable Kydex® 100, a proprietary alloy sheet, brings new dimensions to thermoformers in formability, rigidity, breakage resistance, chemical resistance & fire retardancy. KYDEX Sheet is a high performance thermoplastic sheet is available in a wide range of standard & custom colors, textures, & sheet sizes. Kydex® sheet is Underwriters Laboratories, Inc.® recognized for UL Std 94 V-0/5V & UL 746C and has 18 ft-lbs./in (953 J/m) Notched Izod impact resistance.
      Textures: P1 = Haircell Finish (standard), PC = Level Haircell, PH = Seville Texture, PA = Smooth, P8 = Suede Texture, P3 = Velour Matte, PE = Smooth Nap, PK = Cashmere
      Applications: Aircraft interior components, Mass Transit Vehicle & RV interiors, Equipment Housings, Medical Products
    • Meldin® 7001 Unfilled Polyimide Parts and Shapes. Meldin 7001 Rods & Plates offer superior mechanical properties & high chemical resistance. Meldin is ideal for electrical and thermal insulating applications. More ductile than ceramics, and lighter weight than metals, Meldin® 7001 is an excellent choice for structural parts in aerospace and other applications where metal replacement is desirable. In Semiconductor Wafer Processing applications, the plasma etch rate of Meldin® 7001 is 10% to 20% lower than Vespel® SP-1 providing superior performance over time. (contact us for complete details). For IC Test Sockets & Probe Test Heads, Meldin® 7001 is also an excellent replacement for Vespel® SP-1. Meldin 7000 products feature Continuous Operational Temperatures up to 550ºF (260ºC) and Intermitting Operation up to 900ºF , while holding tight tolerances of ±0.001 in. on both ODs and IDs. Meldin 7001 is suitable for high-temperature structural, high-purity semiconductor, & plasma welding applications.
    • Meldin Plates are Compression Molded & Meldin Rods are Isostatically Molded (ISO)
    • Meldin DF Parts are Direct Formed. (contact us for custom quotes)
      Typical Applications:
    • Wafer Clamping Rings, IC Test Sockets & Nests, Plasma Torch Tips, Bearings, Seals, Insulators, Thrust Washers
    • MELDIN® 7021, Polyimide with 15% by Weight Graphite Filler (comparable to Vespel SP-21 polyimide).
      Our self-lubricating grade, MELDIN® 7021, has 15% by weight graphite fillers, encapsulated by the base polyimide resin. With its low coefficient of friction and high heat resistance, MELDIN® 7021 provides our customers the best all-around choice for high temperature bearings, seals, and other low-wear applications.

      Application Profiles:
    • Meldin 7021 Aircraft Engine Vane Bushing
      Meldin 7021 self-lubricating polyimide materials meet or exceed the most stringent requirements for aerospace applications. Backed up by third-party independent testing, the Meldin 7021 material grade provide our customers consistent mechanical and performance properties for aircraft airframe systems such as landing gear and fuselage components, as well as jet engine parts such as pads, bumpers, washers, seals, and bearings.
    • Norplex NP315 Graphite-Filled Canvas Phenolic. NP315 consists of cotton canvas fabric combined with a phenolic resin enhanced with a solid graphite lubricant to reduce wear. The product is easy to machine and operates with less noise than metal. In addition, this physical material is not as abrasive as fiberglass alternatives when used in wear applications. Applications include a variety of parts subject to wear. This material can conduct electricity and it should not be used where this could cause a safety hazard
    • Nylatron® 66 SA FST is a specifically designed polymer solution for aircraft interior applications. Its unique features make it the first engineering plastic product of its kind available as semi-finished shapes (rods and sheets). Fire, smoke and toxicity (FST) retardant capabilities enable Nylatron® 66 SA FST to withstand extreme temperatures up to 175°C. The material is particularly suitable for any kind of application where metal parts (e. g. brackets, seal bushings, slide rails and duct seals) or high performance polymers have traditionally been specified.

      Nylatron® 66 SA FST is the first commercially attractive solution for interior applications in aircraft. Nylatron® 66 SA FST has passed tests to comply with Federal Aviation Regulations FAR 25.853 - the first engineering plastic shape to achieve this standard and offering engineers a safe material solution.
    • The first extruded nylon that meets requirements as specified in FAR 25.853
    • Typical Applications: - Interior aircraft applications (e. g. brackets, seal bushings, slide rails, duct seals)
    • Nylatron GSM cast nylon from Quadrant contains finely divided particles of molybdenum disulphide (MoS2) to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. This material may be cast in standard sizes and near-net shapes. Massive Plates, Rods & Tubes are avilable upon request.
    • Nylon® MD (Cast 6) is a nylon and molybdenum disulfide (MoS2) composition designed to improve the mechanical, thermal and bearing properties to Type 6 Nylon while maintaining its basic electrical and chemical characteristics. Cast Nylon MD is more cost efficient than extruded Nylon MD when it comes to production of large parts. The casting process allows for massive sheets up to 60" x 120", Rods up to 24" dia, Tubes up to 55" diameter, and even Near-net Shapes for the production of large, "hollowed-out" parts that would otherwise require heavy machining and waste.

      Through compounding, finely divided particles impart extra lubricity to this nylon, permitting Nylon MD parts to operate with little or no lubrication. This makes it especially suited to applications where external lubrication is impractical, contaminating or difficult to maintain. The added lubricity also contributes dramatically to component service life, making Nylon MD a very cost-efficient choice. Nylon MD provides non-galling and non-scratching characteristics, sound dampening qualities, insulating properties, resistance to oils, greases, most alkalies, solvents, and organic acids


Items Per Page:   Pages:  1  2  3  4  5  6  7
  Privacy Policy | Terms and Conditions | Site Map | Contact Us | About Us | Our History

Need More Help? Call us 1-888-995-7767

©Copyright 2017, Professional Plastics All Rights Reserved