plastic supplier, plastic sheet, plastic rods, plastic tubing, plexiglass, store Professional Plastics sells Plastic Sheet, Plastic Rod, Plastic Tubing and Plastic Film and materials for any industry
Professional Plastics Locations
Account Shopping Cart Shopping Cart Shopping Cart
Careers       Locations      Contact Us
Log In:



New User?
Create a new Account.
 

HomeMagmatech XL-911A
Magmatech XL-911A
OVERVIEW
Machinable Magmatech XL-911A is a natural ceramic material. In chemical terms it is a hydrous alumina silicate. We supply this material in standard rods, blocks, and plates as well as special shapes.
  • Applications Include: prototype hardware, insulators, bushings, soldering fixtures, nozzles, welding tips or whatever you need.
    Machining
    Unfired Magmatech XL-911A is a free machining material that can be shaped using most machine tools. The material is non-toxic but as with any airborn dust it could a be respiratory irritant if directly inhaled. Common sense and dust collection systems are recommended.
    Firing:
    The following procedure should be followed carefully to avoid cracking:
    Machined parts should be placed in a cool furnace and protected from direct heat radiation. The use of refractory furniture, boxes,or baffles is recommended. A heating rate of 200 - 250º F per hour is typical. The rate of heating should not exceed 300º F per hour. Parts with cross sections exceeding 1/2" are more critical and cracking may occur during the firing cycle. If a cross section of 1/2" or greater is unavoidable, a heating rate of approximately 50º - 150º F per hour and strategically placed stress relief holes may help minimize cracking. The maturing temperature of Magmatech XL-911A is between 1850º and 2000º F. The temperature should be maintained for approximately 30 minutes up to 1/4" cross section and 45 minutes for 1/2" and greater cross sections. Fired pieces may be removed from the furnace after cooling below 200º F. During the firing process, Magmatech XL-911A expands approximately 2%. A temperature of 2000º F should not be exceeded. If 2000º F is exceeded, crystallization, distortion, shrinkage and a loss of stated material properties will occur.

    As with most natural materials, texture, color, hardness, machinability, final expansion, and ideal firing temperatures may vary.
  • FEATURES AND BENEFITS
    Magmatech XL-911 Features:
  • Magmatech XL-911A is machinable in an unfired state and used in applications up to 1000 F
  • After firing, parts are as hard as carbide & usable up to 2100 F
  • Magmatech XL-911A has low thermal expansion
  • Magmatech XL-911 is a low-cost, high-performance product
  • Magmatech XL-911A is available in wide range of stock up to 12" in diameter.
  •    (MAGMATECH XL-911A) Magmatech XL-911A


    CAN'T FIND WHAT YOU'RE LOOKING FOR?
    See More Ceramics

    REQUEST A QUOTE

    Items in Bold must be filled in.
    Company Name:
    Name:
    First
      Last
    City:
    Country/State:
     USA
     Canada
     Other
    Zip/Postal Code: (Required if USA or Canada)
    Email:
    Phone Number:
    Product Name:
    Question or Comment:
      Privacy Policy | Terms and Conditions | Site Map | Contact Us | About Us | Our History

    Need More Help? Call us 1-888-995-7767

    ©Copyright 2017, Professional Plastics All Rights Reserved