Ketron PEEK Links:
Ketron 1000 Data Sheet
Ketron CA30 LSG
Ketron Classix LSG
Ketron GF30 LSG
Ketron PEEK LSG Brochure
More Quadrant products
SCROLL DOWN TO ORDER KETRON 1000 PEEK
|
|
Ketron® PEEK
Ketron® PEEK grades offer chemical and hydrolysis resistance similar to PPS, but can operate at higher temperatures. PEEK 1000 offers steam and wear resistance, while carbon-reinforced PEEK provides excellent wear capabilities. Our latest grade, PEEK HPV, offers outstanding bearing performance. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-O flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.
Ketron® PEEK 1000
This general purpose grade is unreinforced and offers the highest elongation and toughness of all PEEK grades. The newly available black PEEK 1000 is ideal for instrument components where aesthetics are important, as well as for seal components where ductility and inertness are important.
Other Ketron® PEEK Grades:
Ketron® PEEK GF30 (30% Glass-Reinforced)
The addition of glass fibers significantly reduces the expansion rate and increases the flexural modulus of PEEK. This grade is ideal for structural applications that require improved strength, stiffness or stability, especially at temperatures above 300°F (150°C).
Ketron® PEEK CA30 (30% Carbon Fiber-Reinforced)
The addition of carbon fibers enhances the compressive strength and stiffness of PEEK, and dramatically lowers its expansion rate. It offers designers optimum wear resistance and load carrying capability in a PEEK-based product. This grade provides more thermal conductivity than unreinforced PEEK -- increasing heat dissipation from bearing surfaces improving bearing life and capability.
Ketron® PEEK LSG (Life Science Grade) Family of Products:
This series of PEEK materials were developed specifically for Life Sciences applications and are pre-qualified biocompatible materials
Ketron® PEEK HPV (Bearing Grade)
Carbon fiber reinforced with graphite and PTFE lubricants, our newest grade of PEEK offers the lowest coefficient of friction and the best machinability for all PEEK grades.
|
 |
|
Ketron® PEEK - Chemically Resistant Structural and Bearing & Wear Material for Continuous Use
Excellent chemical resistance
Very low moisture absorption
Inherently good wear and abrasion resistance
Unaffected by continuous exposure to hot water or steam
|
|
